final fantasy 10 performance

hatking01 · February 3rd, 2008, 05:12

Hey
I've got a 7900 GT, Athlon 64 3700+ and 1.5g of RAM.

Using GSdx9 0.10.0 i get about 20-30 fps in the opening cut scenes with Linear texture filtering and Deinterlace enabled. This is too slow.

I've tried using ZeroGS KOSMOS 0.97 with VU skipping, Interlace Enabled and Bilinear Filtering off, and that gets me about 50-60 fps but I cant bear the jitteryness of VU skipping. Without VU skipping it's pretty much the same as above.

The 0.9.5 emu doesn't make a difference.

My question is, with the specs of my comp, is there a config that will allow me to get decent, playable (40+) fps without having it in lego-mode?

Thanks.

Mkilbride2588 · February 3rd, 2008, 05:21

Doubtful. Your CPU is your real weak point, Grapics cards only matter say, 30%, 70% of performance is CPU based, especially with Multi-cores. a Dual core is recommended.

Force88 · February 3rd, 2008, 06:11

there's no chance that you can pass over 30fps with that cpu. With me, to attain full speed in ffx I need a core 2 duo 2.4ghz or an amd x2 5200+

tuanming · February 3rd, 2008, 07:03

You can try overclocking, but don't expect full speed...on that cpu.

__________________
Intel Core2Duo E6300 1.86Ghz L629A244 @ 3.78GHz
Asus P5K-E Wifi/AP Rev.1.02g
Thermalright Ultra Extreme 120+ FM121 (110 cfm fan)
ATI x1900 GT Rev.2 256mb 513/657
G.Skill 2x1gb Hz--540MHz
CORSAIR CMPSU-1000HX 1000W

hatking01 · February 3rd, 2008, 08:15

Thanks all

rainbow · February 3rd, 2008, 09:02

Well, latest GSDX might help a little, but don't expect miracles <use sse2 version>.

Last edited by rainbow; February 3rd, 2008 at 09:09..

February 3rd, 2008, 05:12	#1
hatking01 Registered User Join Date: Jan 2008 Location: sssssssss Posts: 2	final fantasy 10 performance Hey I've got a 7900 GT, Athlon 64 3700+ and 1.5g of RAM. Using GSdx9 0.10.0 i get about 20-30 fps in the opening cut scenes with Linear texture filtering and Deinterlace enabled. This is too slow. I've tried using ZeroGS KOSMOS 0.97 with VU skipping, Interlace Enabled and Bilinear Filtering off, and that gets me about 50-60 fps but I cant bear the jitteryness of VU skipping. Without VU skipping it's pretty much the same as above. The 0.9.5 emu doesn't make a difference. My question is, with the specs of my comp, is there a config that will allow me to get decent, playable (40+) fps without having it in lego-mode? Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

February 3rd, 2008, 05:21	#2
Mkilbride2588 The Pest Join Date: Oct 2006 Location: Earth Posts: 1,815	Doubtful. Your CPU is your real weak point, Grapics cards only matter say, 30%, 70% of performance is CPU based, especially with Multi-cores. a Dual core is recommended.

February 3rd, 2008, 06:11	#3
Force88 Registered User Join Date: Dec 2005 Location: VN Posts: 43	there's no chance that you can pass over 30fps with that cpu. With me, to attain full speed in ffx I need a core 2 duo 2.4ghz or an amd x2 5200+

February 3rd, 2008, 07:03	#4
tuanming Final Fantasy XXX Join Date: Feb 2006 Location: USA, TX Posts: 2,413	You can try overclocking, but don't expect full speed...on that cpu. __________________ Intel Core2Duo E6300 1.86Ghz L629A244 @ 3.78GHz Asus P5K-E Wifi/AP Rev.1.02g Thermalright Ultra Extreme 120+ FM121 (110 cfm fan) ATI x1900 GT Rev.2 256mb 513/657 G.Skill 2x1gb Hz--540MHz CORSAIR CMPSU-1000HX 1000W

February 3rd, 2008, 08:15	#5
hatking01 Registered User Join Date: Jan 2008 Location: sssssssss Posts: 2	Thanks all

February 3rd, 2008, 09:02	#6
rainbow Anime & jRPGs Addict Join Date: May 2007 Location: None of your business Posts: 823	Well, latest GSDX might help a little, but don't expect miracles <use sse2 version>. __________________ [CENTER]C2D E6300 3.06 GHz \| P5N-E SLI \| 2 GB RAM 1000 MHz 5-4-4-12 \| 7900GS 585/800 MHz \| Audigy 2 \| XP Pro SP3 Last edited by rainbow; February 3rd, 2008 at 09:09..