Sorry, i think i killed old link
Originally Posted by RF
RF's Guide to Dumping Your PS2 Bios over LAN
Below you will find my guide on how to dump your PS2's BIOS over LAN.
There isnt any tutorials around, and it took me a good while to write this.
First of all I know there are other ways of doing this, but this is the way it worked best for me
Please leave any comments or questions you may have, as I will do my
best to make anything you dont understand more clear or re-word steps
Also, most of this can be found through google. However lots of sites
have links to modchips/warez etc so please no links. I would like to
thank all the great ps2 dev's and the ps2 community for providing lots
A downloadable copy of this guide is attached to the first post, all
files included in the first post are freeware and freely distributable.
Dumping Your BIOS over LAN
What You Will Need
1. An 8mb memory card (An official Sony memory card is preferred with atleast 1mb free)
2. A Ethernet Adapter (The adapter with both Ethernet and Dialup ports is preferred)
3. A router setup to use static IP's
4. A CD-Writer + one CD-R
5. A Retail Playstation (NOT A PS2) game.
What This Guide Will NOT Cover
1. Modchips and how you will boot your custom code onto your ps2.
2. How to setup your LAN with static ip's
Table of Contents
1. General Overview
2. Memory card exploit
3. Dumping the Bios
1. General Overview
Much of the information is easy to find if you just do a Google search
for the big stuff such as the memory card exploit (aka Independence
Exploit), however I am unable to post these sites as they often do
contain links to things such as modchips etc that we do not support
here on NGEmu. Before starting you will need a way such as a modchip or
swapdiscs to boot custom code on your ps2. We
will be burning a custom disc to cd-r in this tutorial so if you have
no way to boot it on your ps2, then all your work will be in vain.
2. Memory card Exploit
What this will allow you to do is upload custom executables (.ELF) files to your ps2 and execute them.
A) First look at your psx disc and note the disc ID. The disc ID will
be in the format SLUS-01473, and will be on both the case and the cd
B) Now create a folder on your hard drive to keep all the exploit files
in. For this example we will use C:\PS2Exploit. After that is
downloaded, grab the MemcardExploit.rar below and extract it to your
C) After extracting you should see CDGenPS2.exe, titleman.exe,
TITLE.DB, and the Exploit folder. Open a command prompt and switch to
D) In the prompt type “titleman –a XXXX-XXX.XX” without quotes,
Opening a command prompt.
Start > Run > cmd > OK
Changing To the Directory
and instead of X's use your disc ID. For example I used Rainbow Six:
Lone Wolf as my playstation game so I typed in SLUS_014.73. If you did
it correctly it will say it is done.
Note: Sometimes depending on your psx game you will have to use
a dash instead an underscore in your disc ID. If you aren't sure, it
dosent hurt to repeat step D with another disc ID.
E) Close the cmd prompt and copy your TITLE.DB to the Exploit folder.
You should now have in the Exploit folder the Files folder,
EXPINST.ELF, CDVD.IRX, and a SYSTEM file (SYSTEM.CNF, but Microsoft
hides the CNF extension).
Note: To check if your TITLE.DB is correct, open it within wordpad or
notepad and take a look. However, don't edit this file as simply
editing it in rich text will break it (I think).
F) Now go into the Files folder. BOOT.ELF is the execuatable that is
booted each time the exploit is run. For now this is set to ps2menu,
but you can use whatever file management app you would like. I just
happen to use ps2menu myself.
Now open CONFIG.DAT with notepad or wordpad. You will see three IP
addresses that you will need to customize to your own lan. The first is
the IP address you want the PS2 to have. The second is the subnet of
your lan. The third is the gateway or your routers ip.
G) Now go back to the main folder and locate CDGenPS2.exe and execute
it. Now drag and drop the exploit files in the "Exploit" folder (Not
the Exploit folder itself) into the right pane of CDGenPS2 (See
screenshot below). This must be done in the following order:
5. FILES (Drag the whole folder)
Now on the left press the IMG button (the top one with a CD over it)
and save your img somewhere to burn. Now use Alcohol120% to burn this
image in Mode2 Form1 and the writing method as DAO/SAO.
H) Now all that is left is to throw in your burned disc and boot it
using any method you see fit. Make sure your memory card is in slot one
and it should automatically install once it is booted. After it is
complete it will say Finished! Now shut down your ps2 with the switch
on the back, then turn it back on and eject your exploit cd.
I) Now put in your psx disc, after a few seconds you should see
ps2menu! Read the top left corner so you can learn how to use ps2menu
Note: Yes it was a lot of work, but its worth it. Now you have a way of
browsing all the files you have on your ps2, backup game saves,
transfer new or updated executables with execftps, and executing custom
executables without having to burn more discs. All your elfs and files
should stay in the BADATA-SYSTEM folder.
Update: Instead of PS2Menu you might want to give
LaunchELF (Unofficial) a try. The latest version as of July 26, 2006 is
v3.80 (Note: There are two versions of LaunchELF. The original
LaunchELF was discontinued a long time ago, but was picked up by other
authors and is now known as the "Unofficial LaunchELF").
3. Dumping the bios
For dumping your bios, everything you need can be found here: PS2DEV: PS2 Programming - Loaders. Grab PS2Link 1.22 and XLink Beta 1.
A. Power on your ps2 and use ps2menu to browse to your BADATA-SYSTEM directory on your memory card.
B. Find EXECFTPS.ELF and hit X to execute it. If all goes well it should come up saying "FTP Server initialized on port 21…!”
C. Now open up your favorite FTP Application and ftp into your ps2. Any
username/password combo will work. You should be presented with a mc
folder. Double click into the mc folder and you will see a 0 folder.
When you are inside your memory card, locate the BADATA-SYSTEM folder
and create a new folder called ps2link.
D. Now use winrar to extract the ps2link_122.tar.gz archive you
downloaded from ps2dev. Delete the licenses folder, and the README file
to save the most space on your memory card.
E. Open the IPCONFIG.DAT from the ps2link_122.tar.gz with notepad. Just
like before, fill out the ip information like we did above for the
memory card exploit.
F. FTP all the files from the ps2link archive into the ps2link folder
you created on your ps2 memory card. After the transfer is complete,
turn the ps2 off with the switch at the back. Then boot back into
G. Once back into ps2menu, browse to the BADATA-SYSTEM folder and go
into your newly created ps2link folder. Find and highlight the
ps2link.elf and press X to execute it.
H. Once the ps2link server is started, unpack the xlink_win32_beta1.zip archive you downloaded from ps2dev.
I. When you open XLink it prompts for the ps2 ip information. Fill that in and press save. Next go to PCSX2.net - News and grab the dumpbios archive.
J. In XLink, make sure it says Connected at the top, then press Run.
Locate your DUMPBIOS.ELF and set any options you would like (such as
shutting down the ps2 after your file has been run).
K. Congratulations, after a few minutes you should have dumped your
ps2’s bios! You also have setup your ps2 to run pretty much anything
you throw at it.
I take no responsibility for you breaking your ps2, burning bad burning bad cd’s etc.
- does not work with slim PS2!
Dumping BIOS via USB
Dumping BIOS with Datel Action Replay Max
This method works with slim PS2
Extract AUTOEXEC.ELF from attached ps2link1.46_armax.zip
to root folder of USB drive.
Boot ARMAX and launch media player.
PS2LINK will be executed.
Follow RF's LAN method above.
Dumping BIOS with Codebreaker 7.1+
recently CMX encrypted some apps for usage with CB
CMGSCCC.com - The Official Code Breaker Site - Sony PlayStation®2 Homebrew
Didn't check Naplink, but SMS
Copy USB version of dumpbios.elf
to root dir of USB drive
Boot Codebreaker, it will run pelican.bin
In SMS configure: exit SMS=mass:/dumpbios.elf
BIOS will be dumped to USB drive
Last edited by Nachbrenner; January 7th, 2007 at 08:40..