FPSE: DLL Error.

Rygar · December 3rd, 2001, 02:44

When I load the .exe for FPSE, it says that the required gpurend.dll is not found. I did a search for it, and it is not on my system. Where do I get that DLL at?

Prafull · December 3rd, 2001, 03:37

Try reinstalling fpse.If it doesnt help I may attach the file here for you.I hope its not an error message due to improper configuration of gpu plugin.
*edit*In fact its an error due to non configuration of gpu plugin,configure it again.

__________________

Last edited by Prafull; December 3rd, 2001 at 15:44..

**aldo** · December 3rd, 2001, 14:47

You should run FPSECFG.exe press plugins button.

gpuRend.dll is a copy (renamed) of the selected GPU plugin.

__________________
aldo vargas
http://www.aldostools.org/

Rygar · December 3rd, 2001, 19:49

Now when i run fpse i just get a white small box and an msdos prompt that blinks the text very fast. I can't really read it but when i look closely it looks like it says 'cant read 32' something something....What do i do?

lu_zero · December 3rd, 2001, 20:38

you should read a FPSE tutorial there is one with pictures in the www.psxfanatics.com site

anyway the message you get is because you didn't configure the FPSE correctly

you either forgot about placing a bios in the bios dir or you checked the HLE bios emulation (that isn't working properly)

__________________
lu_zero
FPSE Former Team Member
P.E.Op.S member
GPSE Project starter

Rygar · December 3rd, 2001, 20:43

Oh. What is the name of the BIOS I need?

lu_zero · December 3rd, 2001, 20:50

#fpse on irc (azzurranet or efnet)
for direct help

forums aren't for chatlike requests...

btw any scphXXXX with XXXX == 1001 7502 and so on

any bios but the scph1000 is ok

for pal games I suggest the 7502

__________________
lu_zero
FPSE Former Team Member
P.E.Op.S member
GPSE Project starter

Rygar · December 3rd, 2001, 21:03

I have the BIOS from ePSXe. Now it says it couldn't load libPS.exe....

lu_zero · December 3rd, 2001, 21:26

the libps is needed just for demos that is just a warning.

the errors have a (x)
the warings have a (!)

__________________
lu_zero
FPSE Former Team Member
P.E.Op.S member
GPSE Project starter

Rygar · December 3rd, 2001, 23:20

Ok well, when I start it up, the display just stays white and nothing happens...

December 3rd, 2001, 02:44	#1
Rygar The Forgotten One Join Date: Jul 2001 Posts: 74	FPSE: DLL Error. When I load the .exe for FPSE, it says that the required gpurend.dll is not found. I did a search for it, and it is not on my system. Where do I get that DLL at?

December 3rd, 2001, 20:38	#5
lu_zero Registered User Join Date: Apr 2001 Location: Earth,Europe,Italy,Turin Posts: 292	RTFM you should read a FPSE tutorial there is one with pictures in the www.psxfanatics.com site anyway the message you get is because you didn't configure the FPSE correctly you either forgot about placing a bios in the bios dir or you checked the HLE bios emulation (that isn't working properly) __________________ lu_zero FPSE Former Team Member P.E.Op.S member GPSE Project starter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

December 3rd, 2001, 03:37	#2
Prafull Registered User Join Date: Aug 2001 Location: India Posts: 5,429	Try reinstalling fpse.If it doesnt help I may attach the file here for you.I hope its not an error message due to improper configuration of gpu plugin. editIn fact its an error due to non configuration of gpu plugin,configure it again. __________________ Last edited by Prafull; December 3rd, 2001 at 15:44..

December 3rd, 2001, 14:47	#3
aldo Emu author Join Date: Apr 2001 Location: in front of my laptop Posts: 294	You should run FPSECFG.exe press plugins button. gpuRend.dll is a copy (renamed) of the selected GPU plugin. __________________ aldo vargas http://www.aldostools.org/

December 3rd, 2001, 19:49	#4
Rygar The Forgotten One Join Date: Jul 2001 Posts: 74	Now when i run fpse i just get a white small box and an msdos prompt that blinks the text very fast. I can't really read it but when i look closely it looks like it says 'cant read 32' something something....What do i do?

December 3rd, 2001, 20:43	#6
Rygar The Forgotten One Join Date: Jul 2001 Posts: 74	Oh. What is the name of the BIOS I need?

December 3rd, 2001, 20:50	#7
lu_zero Registered User Join Date: Apr 2001 Location: Earth,Europe,Italy,Turin Posts: 292	#fpse on irc (azzurranet or efnet) for direct help forums aren't for chatlike requests... btw any scphXXXX with XXXX == 1001 7502 and so on any bios but the scph1000 is ok for pal games I suggest the 7502 __________________ lu_zero FPSE Former Team Member P.E.Op.S member GPSE Project starter

December 3rd, 2001, 21:03	#8
Rygar The Forgotten One Join Date: Jul 2001 Posts: 74	I have the BIOS from ePSXe. Now it says it couldn't load libPS.exe....

December 3rd, 2001, 21:26	#9
lu_zero Registered User Join Date: Apr 2001 Location: Earth,Europe,Italy,Turin Posts: 292	the libps is needed just for demos that is just a warning. the errors have a (x) the warings have a (!) __________________ lu_zero FPSE Former Team Member P.E.Op.S member GPSE Project starter

December 3rd, 2001, 23:20	#10
Rygar The Forgotten One Join Date: Jul 2001 Posts: 74	Ok well, when I start it up, the display just stays white and nothing happens...