[For french people] Probleme de clavier

Stitch07 · December 9th, 2006, 14:07

Hi all!
I'm sorry but my english is too bad, so I speak in french...

Je suis nouveau sur PCSX2, mais ça m'a l'air de pas mal marcher. J'ai juste un soucis avec ma config de pad/clavier...
J'ai 3 jeux:
-"Bmx xxx" qui tourne à 10 fps de moyenne mais dont les commandes répondent bien.
-"Aeon Flux" qui rame à 2/3 fps et dont les touches d'actions marchent mais impossible bouger le perso.
-"Monster Hunter" qui tourne à 20/25 fps, les touchent d'actions marchent, mais le perso bouge pas.
Visiblement j'ai un soucis avec la config de clavier (j'ai pas de manette), au niveau des sticks analogiques.
J'ai les 4 plugins de pad ("SSSPSX PAD Plugin 1.7.0", "PAD Winkeyb Driver 0.9.0", "Pad Zenogais(DX9) 2.10.0" et "TwinPad: PadWinK mod 0.1.0"), et je leur ai assigné des touches de mon clavier, mais je ne peux pas assigner les touches analogiques sauf sur TwinPad, mais sur celui-ci aucune touches ne marchent dans l'émulateur... le seul plugin qui fonctione, c'est SSSPSX PAD, mais l'analogique marche pas...
Comment faites-vous pour que ça marche? quel plugin utilisez-vous et comment le configurez-vous?
Merci beaucoup, je suis impatient d'aller pourfendre du monstre!!!

Stitch07

__________________
My english is very bad, so if you want to speak to me in french, you'll be my friend!

**bositman** · December 9th, 2006, 14:36

Sorry but this is an english only forum,you will have to post your questions in english
Because i happen to know some French,i realize you have problems configuring your analog controls to your pad...you shouldnt have a problem with SSSPSXPAD normally but there are a few pads that do not work with it properly.Post what kind of pad you are using

__________________

Stitch07 · December 9th, 2006, 14:52

Ok, sorry for my french post, but I've seen that some french people are here, so...
Ok, I've a problem with analog pad, but I haven't pad (just an old "Logitech WingMan RumblePad" that don't work well), so I want to play with my keyboard... Is it possible? with wich plugin? how to configure it correctly?
Thanks!

__________________
My english is very bad, so if you want to speak to me in french, you'll be my friend!

**bositman** · December 9th, 2006, 14:55

Then use the twinpad plugin,it should work ok (can't help you with configuring i haven't tried it since i own a gamepad)

__________________

Stitch07 · December 9th, 2006, 15:00

I have tried with TwinPad. I've configure the key, but nothing work in PCSX2... I've put the dll joined in my "plugin" directory, and the TwinPad.exe is in the PCSX directory, but that don't work...

Thank you for your help, even if it don't work!

__________________
My english is very bad, so if you want to speak to me in french, you'll be my friend!

Barius · December 9th, 2006, 20:28

Did you actually select the TwinPad plugin in the PCSX2 configuration?

Also, you should put TwinPad.exe into the *plugins* folder if you want PCSX2 to open it for you when you click 'configure'.

Stitch07 · December 9th, 2006, 21:20

Ok, thanks! I've tried to put TwinPad in the 'plugin' directory and it's ok, I can configure it with PCSX2, but it doesn't work with my games......

Grrrrrr.... Is it possible to play only with the keyboard???

__________________
My english is very bad, so if you want to speak to me in french, you'll be my friend!

December 9th, 2006, 14:07	#1
Stitch07 Le Stitch Français! Join Date: Dec 2006 Location: France Posts: 8	[For french people] Probleme de clavier Hi all! I'm sorry but my english is too bad, so I speak in french... Je suis nouveau sur PCSX2, mais ça m'a l'air de pas mal marcher. J'ai juste un soucis avec ma config de pad/clavier... J'ai 3 jeux: -"Bmx xxx" qui tourne à 10 fps de moyenne mais dont les commandes répondent bien. -"Aeon Flux" qui rame à 2/3 fps et dont les touches d'actions marchent mais impossible bouger le perso. -"Monster Hunter" qui tourne à 20/25 fps, les touchent d'actions marchent, mais le perso bouge pas. Visiblement j'ai un soucis avec la config de clavier (j'ai pas de manette), au niveau des sticks analogiques. J'ai les 4 plugins de pad ("SSSPSX PAD Plugin 1.7.0", "PAD Winkeyb Driver 0.9.0", "Pad Zenogais(DX9) 2.10.0" et "TwinPad: PadWinK mod 0.1.0"), et je leur ai assigné des touches de mon clavier, mais je ne peux pas assigner les touches analogiques sauf sur TwinPad, mais sur celui-ci aucune touches ne marchent dans l'émulateur... le seul plugin qui fonctione, c'est SSSPSX PAD, mais l'analogique marche pas... Comment faites-vous pour que ça marche? quel plugin utilisez-vous et comment le configurez-vous? Merci beaucoup, je suis impatient d'aller pourfendre du monstre!!! Stitch07 __________________ My english is very bad, so if you want to speak to me in french, you'll be my friend!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

December 9th, 2006, 14:36	#2
bositman Angel of Death Join Date: Jun 2002 Location: Athens, Greece Posts: 3,629	Sorry but this is an english only forum,you will have to post your questions in english Because i happen to know some French,i realize you have problems configuring your analog controls to your pad...you shouldnt have a problem with SSSPSXPAD normally but there are a few pads that do not work with it properly.Post what kind of pad you are using __________________

December 9th, 2006, 14:52	#3
Stitch07 Le Stitch Français! Join Date: Dec 2006 Location: France Posts: 8	Ok, sorry for my french post, but I've seen that some french people are here, so... Ok, I've a problem with analog pad, but I haven't pad (just an old "Logitech WingMan RumblePad" that don't work well), so I want to play with my keyboard... Is it possible? with wich plugin? how to configure it correctly? Thanks! __________________ My english is very bad, so if you want to speak to me in french, you'll be my friend!

December 9th, 2006, 14:55	#4
bositman Angel of Death Join Date: Jun 2002 Location: Athens, Greece Posts: 3,629	Then use the twinpad plugin,it should work ok (can't help you with configuring i haven't tried it since i own a gamepad) __________________

December 9th, 2006, 15:00	#5
Stitch07 Le Stitch Français! Join Date: Dec 2006 Location: France Posts: 8	I have tried with TwinPad. I've configure the key, but nothing work in PCSX2... I've put the dll joined in my "plugin" directory, and the TwinPad.exe is in the PCSX directory, but that don't work... Thank you for your help, even if it don't work! __________________ My english is very bad, so if you want to speak to me in french, you'll be my friend!

December 9th, 2006, 20:28	#6
Barius Registered User Join Date: Aug 2006 Location: At home Posts: 942	Did you actually select the TwinPad plugin in the PCSX2 configuration? Also, you should put TwinPad.exe into the plugins folder if you want PCSX2 to open it for you when you click 'configure'.

December 9th, 2006, 21:20	#7
Stitch07 Le Stitch Français! Join Date: Dec 2006 Location: France Posts: 8	Ok, thanks! I've tried to put TwinPad in the 'plugin' directory and it's ok, I can configure it with PCSX2, but it doesn't work with my games...... Grrrrrr.... Is it possible to play only with the keyboard??? __________________ My english is very bad, so if you want to speak to me in french, you'll be my friend!