Dual Shock 2 Config Problems

chaohuei · June 10th, 2005, 05:17

I'm using a Rockfire PSX/USB bridge with a Dual Shock 2. Whenever I try to map the keys (with both the innate configurator and Xorcist's configurator), the mouse automatically sets what I'm assuming is the left mouse button (J1_B3) to the key. It won't accept the Dual Shock's input at all. The only exceptions are the start/select buttons, which I have to hold while selecting another key in order to maintain the config.

As it is, I don't have a way of testing my PS controller to check to see if it's broken. I've been away from it for a year, but it was working beforehand on a real PS2 and PS1. Just sitting on a shelf shouldn't damage the controller, right?

KanedA · June 10th, 2005, 08:29

try to reinstall drivers, check if all connections are ok. Helped here

__________________

June 10th, 2005, 05:17	#1
chaohuei Registered User Join Date: Feb 2002 Posts: 3	Dual Shock 2 Config Problems I'm using a Rockfire PSX/USB bridge with a Dual Shock 2. Whenever I try to map the keys (with both the innate configurator and Xorcist's configurator), the mouse automatically sets what I'm assuming is the left mouse button (J1_B3) to the key. It won't accept the Dual Shock's input at all. The only exceptions are the start/select buttons, which I have to hold while selecting another key in order to maintain the config. As it is, I don't have a way of testing my PS controller to check to see if it's broken. I've been away from it for a year, but it was working beforehand on a real PS2 and PS1. Just sitting on a shelf shouldn't damage the controller, right?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

June 10th, 2005, 08:29	#2
KanedA PS2 PAL[v9], PS3Slim PAL Join Date: Aug 2004 Location: PolanD Posts: 5,362	try to reinstall drivers, check if all connections are ok. Helped here __________________