Please read : Chrono Cross and FF9 running on ePSXe 1.6.0

_E_ · January 1st, 2004, 21:23

ePSXe 1.6.0 is having some issue with both games. Use ePSXe 1.8.0 instead, you can get it from ePSXe's website, Welcome to the official ePSXe website

Chrono Cross:

If you choose to use 1.6.0, use the "-noauto" command line
for correct configurations , check Kane's domain
if you'd like, you may sift through this thread and see other users' opinions. use that thread at your own risk.

FF9:

If you have a PAL version, you'll need a PPF patch.
For a good OGL config, check out Kane's domain, for OGL2, check out hushypushy's guide.

If you have any other troubles, check the troubleshooting FAQ and if that doesn't help, make a new thread.

Last edited by ShendoXT; April 21st, 2013 at 09:21.. Reason: Changed 1.7.0 to 1.8.0 version

January 1st, 2004, 21:23	#1
_E_ Lurking Join Date: Aug 2002 Location: Gone Posts: 9,354	Please read : Chrono Cross and FF9 running on ePSXe 1.6.0 ePSXe 1.6.0 is having some issue with both games. Use ePSXe 1.8.0 instead, you can get it from ePSXe's website, Welcome to the official ePSXe website Chrono Cross: If you choose to use 1.6.0, use the "-noauto" command line for correct configurations , check Kane's domain if you'd like, you may sift through this thread and see other users' opinions. use that thread at your own risk. FF9: If you have a PAL version, you'll need a PPF patch. For a good OGL config, check out Kane's domain, for OGL2, check out hushypushy's guide. If you have any other troubles, check the troubleshooting FAQ and if that doesn't help, make a new thread. Last edited by ShendoXT; April 21st, 2013 at 09:21.. Reason: Changed 1.7.0 to 1.8.0 version

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode