Memory card bug

kingking 3rd · June 26th, 2001, 21:39

Is memory card supposed to work in chrono cross and lengend of legaia. I am sure that I can save at least once, but most of the time there's nothing saved after I quit the emulator.

kingking 3rd · June 26th, 2001, 22:20

fufufu, I find out what's the problem. When you set slot 1 and slot 2 using the same memory card. You must save in both slots, or nothing will be saved after you quit. So it's better to set two different memory cards in those two slots.

Bahamut_Zero · June 26th, 2001, 23:57

maybe because you use savestate

__________________
Please Visit my website http://bahamutdesign.bravepages.com/

huh.. pengen balik ke indo neh

kingking 3rd · June 27th, 2001, 02:42

savestate has nothing to do with memory card in 1.4

septikus · June 27th, 2001, 03:31

The problem here is that if you use savestates, it saves to a different memory card specific to that savestate. so you may have a normal mem card setup, but once you use a save state it starts using temp.000 and temp.001. so in order to get your saves normally you need to change the extension to *.mcr and then point Epsxe to it. that should do the trick, you can also restart after saving and using savestates, then you can load the game fine 'cuase the emulator is looking at the temp mem cards. hope this helps.

June 26th, 2001, 21:39	#1
kingking 3rd Registered User Join Date: Jun 2001 Posts: 416	Memory card bug Is memory card supposed to work in chrono cross and lengend of legaia. I am sure that I can save at least once, but most of the time there's nothing saved after I quit the emulator.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

June 26th, 2001, 22:20	#2
kingking 3rd Registered User Join Date: Jun 2001 Posts: 416	fufufu, I find out what's the problem. When you set slot 1 and slot 2 using the same memory card. You must save in both slots, or nothing will be saved after you quit. So it's better to set two different memory cards in those two slots.

June 26th, 2001, 23:57	#3
Bahamut_Zero Blitz Gundam Pilot Join Date: Apr 2001 Location: In Final Heaven Posts: 1,014	maybe because you use savestate __________________ Please Visit my website http://bahamutdesign.bravepages.com/ huh.. pengen balik ke indo neh

June 27th, 2001, 02:42	#4
kingking 3rd Registered User Join Date: Jun 2001 Posts: 416	savestate has nothing to do with memory card in 1.4

June 27th, 2001, 03:31	#5
septikus Registered User Join Date: May 2001 Location: Cali Posts: 37	The problem here is that if you use savestates, it saves to a different memory card specific to that savestate. so you may have a normal mem card setup, but once you use a save state it starts using temp.000 and temp.001. so in order to get your saves normally you need to change the extension to *.mcr and then point Epsxe to it. that should do the trick, you can also restart after saving and using savestates, then you can load the game fine 'cuase the emulator is looking at the temp mem cards. hope this helps.