How does Daemon Tools work with VGS?

DarkZeroX5 · June 18th, 2001, 22:11

I've tried everything and I can't get VGS to detect the emulated CD drive that's made by Daemon Tools.

__________________
AMD Duron 650mhz
VisionTek GeForce 2 GTS 64mb AGP
Windows98
128mb RAM
32x Goldstar CDROM
8x/4x/32x Cendyne CDRW

guwapings · June 19th, 2001, 05:04

What version are you using? Did it work on epsxe? I'm using the 2.70 ver and i didn't have any problems except that i need some new windows installer. Then just install it then it works.

FireGL · June 19th, 2001, 12:59

be sure that no cd is in your cdrom drive it will boot in your real cd rom not in daemon

__________________
Open your eyes and look within...
Are you satisfied with the life your livin'?

**SimonMallion** · June 19th, 2001, 13:19

Make sure that your Vitual/Phantom drive has a lower drive letter than your real cd rom drives. VGS will search in alphabetical order for a cd. You can you do this in the contol panel|device manager, just double-click the phantom drive and set the drive letter. You may have to change your real CD drive letters further up the alphabet to make room for your virtual one. Hope this makes sense.

__________________
http://simonmallion.homedns.org - Home of PSXMemTool

DarkZeroX5 · June 19th, 2001, 13:44

Thanks, that worked well. ^_^

__________________
AMD Duron 650mhz
VisionTek GeForce 2 GTS 64mb AGP
Windows98
128mb RAM
32x Goldstar CDROM
8x/4x/32x Cendyne CDRW

June 18th, 2001, 22:11	#1
DarkZeroX5 Registered User Join Date: Apr 2001 Posts: 29	How does Daemon Tools work with VGS? I've tried everything and I can't get VGS to detect the emulated CD drive that's made by Daemon Tools. __________________ AMD Duron 650mhz VisionTek GeForce 2 GTS 64mb AGP Windows98 128mb RAM 32x Goldstar CDROM 8x/4x/32x Cendyne CDRW

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

June 19th, 2001, 05:04	#2
guwapings Registered User Join Date: Apr 2001 Location: somewhere around there... Posts: 204	What version are you using? Did it work on epsxe? I'm using the 2.70 ver and i didn't have any problems except that i need some new windows installer. Then just install it then it works.

June 19th, 2001, 12:59	#3
FireGL I'm? Join Date: Jun 2001 Location: ======> Posts: 1,866	be sure that no cd is in your cdrom drive it will boot in your real cd rom not in daemon __________________ Open your eyes and look within... Are you satisfied with the life your livin'?

June 19th, 2001, 13:19	#4
SimonMallion Emu author Join Date: Apr 2001 Location: England Posts: 1,064	Make sure that your Vitual/Phantom drive has a lower drive letter than your real cd rom drives. VGS will search in alphabetical order for a cd. You can you do this in the contol panel\|device manager, just double-click the phantom drive and set the drive letter. You may have to change your real CD drive letters further up the alphabet to make room for your virtual one. Hope this makes sense. __________________ http://simonmallion.homedns.org - Home of PSXMemTool

June 19th, 2001, 13:44	#5
DarkZeroX5 Registered User Join Date: Apr 2001 Posts: 29	Thanks, that worked well. ^_^ __________________ AMD Duron 650mhz VisionTek GeForce 2 GTS 64mb AGP Windows98 128mb RAM 32x Goldstar CDROM 8x/4x/32x Cendyne CDRW