Quick request/question

Rpgamer007 · April 17th, 2002, 14:02

Hello, I used to be very knowledgeable of PSX emulation, but after I bought a PS2, I haven't been on the scene for quite some time. I am going to d-load the latest version of epsxe and the plug-ins (I understand the downloads will be back up tomorrow?). My computer is definitely fast enough (last time I was on the scene my computer was so slow it was barely even worth emulating on the PC). I have since built an Athlon 1.4 Ghz w/ 512 MB PC2100 DDR RAM and a geforce2 32 MB GTS video card. I would like to get back into emulation, so I have two quick questions:

1: How do I make an iso? I know how to run it but I forgot how to make one

2: Where can I find info on what settings to use when copying a psx cd with clonecd?

I'm slowly re-acquanting myself with the world of psx emulation- please forgive my forgetfulness. Thanks in advance.

P.S. - I used to have a registered name on this board, but once again, I forgot it. Therefore I had to create a new one.

Quatro · April 17th, 2002, 14:25

search the forum... there's a ton load of this kind of threads

__________________
- when you think that you have accomplish so much, many think of it as so little...

GEO · April 17th, 2002, 20:32

in clonecd check the read subchannel data and subchannel audio, it should work. or try one of the clonecd frontends, they will automatically enable all the options for you.

__________________
[sig=110]

mortu · April 17th, 2002, 20:36

I would suggest using Isobuster which I've found easy/quick to use.

__________________
A roast dragon for lunch.

Dual Athlon MP 1900+ on A7M266-D
2.3 Gb Ecc Registered Samsung/Corsair DDR266
Geforce 4 Ti 4400
2x 40Gb Maxtor
1x 18gb Atlas 15k
1x 18gb Atlas V
SB Audigy2 Platinum Ex
22" IIyama Vision Master Pro 512

Also a SparcStation 20 MP with 2x125mhz and 2x110mhz Ross HyperSparcs, 416Mb Ram and Debian 3.0. Also a SS5 somewher and a HP C3000 at 400mhz. Geeky I know.

raekwon thachef · April 17th, 2002, 20:42

i remember this from a while back this will tell you all you need to know to make an iso with isobuster

http://www.ngemu.com/forums/showthre...&threadid=8502

RhombusYSS · April 17th, 2002, 21:03

I've always used CDR-win to make .bin files and never had any problems with any PSX cd's. Also to make your cd-r plug-in work at some point, if you're using Win2k or WinXP you'll have to download adaptec's ASPI drivers

__________________
"Nuh hee ga hip-hop eul ah neu nyah?"

Long live the NJ Nets!! Next target: Baron Davis and the Hornets

Tsuyokereba ikiru, yowakereba shinu. Sorya kono jinsei no ichiban taisetsu na shinjitsu...jaa, soshite, ikura jinrui no inochi ga kouka ka misete kure!

Windows XP Pro, Athlon 1.5 Ghz, 512 MB DDR RAM, ASUS 6800 Deluxe GeForce 32MB DDR, SB Audigy Gamer

Nameless · April 17th, 2002, 22:06

There's a full guide to protections on Clonecd here http://www.daemon-tools.com/clonecd.htm
Hope that helps

__________________
--To every problem, there is a solution (other than death, of course

). So, just smile!!.....okay that's a load of crap but you already know that. 3 years and still fighting!!

Systems:
- Modified Mac Mini: 2GHz Core Duo, 2GB RAM, 100GB 7200RPM HD, Dual-Boot Mac & XP
- HP Tablet PC TC1100: 1.1GHz Centrino, 1GB RAM, 60GB 7200RPM HD, Vista Ultimate

April 17th, 2002, 14:02	#1
Rpgamer007 Registered User Join Date: Apr 2002 Posts: 5	Quick request/question Hello, I used to be very knowledgeable of PSX emulation, but after I bought a PS2, I haven't been on the scene for quite some time. I am going to d-load the latest version of epsxe and the plug-ins (I understand the downloads will be back up tomorrow?). My computer is definitely fast enough (last time I was on the scene my computer was so slow it was barely even worth emulating on the PC). I have since built an Athlon 1.4 Ghz w/ 512 MB PC2100 DDR RAM and a geforce2 32 MB GTS video card. I would like to get back into emulation, so I have two quick questions: 1: How do I make an iso? I know how to run it but I forgot how to make one 2: Where can I find info on what settings to use when copying a psx cd with clonecd? I'm slowly re-acquanting myself with the world of psx emulation- please forgive my forgetfulness. Thanks in advance. P.S. - I used to have a registered name on this board, but once again, I forgot it. Therefore I had to create a new one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

April 17th, 2002, 14:25	#2
Quatro Just visiting ^_^ Join Date: Mar 2002 Location: Laguna Posts: 8,299	search the forum... there's a ton load of this kind of threads __________________ - when you think that you have accomplish so much, many think of it as so little...

April 17th, 2002, 20:32	#3
GEO Registered User Join Date: May 2001 Location: WWW/PT/Viseu/Viriato Posts: 313	in clonecd check the read subchannel data and subchannel audio, it should work. or try one of the clonecd frontends, they will automatically enable all the options for you. __________________ [sig=110]

April 17th, 2002, 20:36	#4
mortu Registered User Join Date: Mar 2002 Location: Holland, who am I kidding, does anyone know where it is anyway :) Posts: 83	I would suggest using Isobuster which I've found easy/quick to use. __________________ A roast dragon for lunch. Dual Athlon MP 1900+ on A7M266-D 2.3 Gb Ecc Registered Samsung/Corsair DDR266 Geforce 4 Ti 4400 2x 40Gb Maxtor 1x 18gb Atlas 15k 1x 18gb Atlas V SB Audigy2 Platinum Ex 22" IIyama Vision Master Pro 512 Also a SparcStation 20 MP with 2x125mhz and 2x110mhz Ross HyperSparcs, 416Mb Ram and Debian 3.0. Also a SS5 somewher and a HP C3000 at 400mhz. Geeky I know.

April 17th, 2002, 20:42	#5
raekwon thachef Banned Join Date: Mar 2002 Location: WestSide!!! Posts: 160	i remember this from a while back this will tell you all you need to know to make an iso with isobuster http://www.ngemu.com/forums/showthre...&threadid=8502

April 17th, 2002, 21:03	#6
RhombusYSS -=NJ Nets NBA Champs 2k2= Join Date: Feb 2002 Posts: 384	I've always used CDR-win to make .bin files and never had any problems with any PSX cd's. Also to make your cd-r plug-in work at some point, if you're using Win2k or WinXP you'll have to download adaptec's ASPI drivers __________________ "Nuh hee ga hip-hop eul ah neu nyah?" Long live the NJ Nets!! Next target: Baron Davis and the Hornets Tsuyokereba ikiru, yowakereba shinu. Sorya kono jinsei no ichiban taisetsu na shinjitsu...jaa, soshite, ikura jinrui no inochi ga kouka ka misete kure! Windows XP Pro, Athlon 1.5 Ghz, 512 MB DDR RAM, ASUS 6800 Deluxe GeForce 32MB DDR, SB Audigy Gamer

April 17th, 2002, 22:06	#7
Nameless r u really that bored? :P Join Date: Jan 2002 Location: Saudi Arabia Posts: 1,925	There's a full guide to protections on Clonecd here http://www.daemon-tools.com/clonecd.htm Hope that helps __________________ --To every problem, there is a solution (other than death, of course ). So, just smile!!.....okay that's a load of crap but you already know that. 3 years and still fighting!! Systems: - Modified Mac Mini: 2GHz Core Duo, 2GB RAM, 100GB 7200RPM HD, Dual-Boot Mac & XP - HP Tablet PC TC1100: 1.1GHz Centrino, 1GB RAM, 60GB 7200RPM HD, Vista Ultimate