how do you configure/use analog control in SFF

[chewyone]

wanna play nights cant figure out how to configure analog stick help pl0z, read about controls in ssf readme file but dont see the analog stick listed:
UP = UP Arrow
DOWN = DOWN Arrow
LEFT = LEFT Arrow
RIGHT = RIGHT Arrow
A TRG = Z key
B TRG = X key
C TRG = C key
X TRG = S key
Y TRG = D key
Z TRG = F key
L TRG = A key
R TRG = G key
START = Enter key
ˆÈ‰º‚Í•Ï�X•s‰Â
CD Open = F1 key
CD Close = F2 key
Hard Reset = F4 key
Scanline‚ÌON/OFF�Ø‚è‘Ö‚¦ = F5 key
Sound‚ÌON/OFF�Ø‚è‘Ö‚¦ = F6 key
State Load = F7 key
State Save = Shift + F7 key
Snapshot = F8 key
Sound Record = F9 key
Video Record = Shift + F9 key
do i need a newer version of sff or somthing? the readme is mostly japanese and kinda hard to make heads or tails of i searced the forums and google for an answer but no luck thanks

__________________

CASE: COOLER MASTER HAF 932 Blue RC-932-KKN3-GP Black Steel ATX Full Tower Computer Case
MOBO: GIGABYTE GA-790FXTA-UD5
GPU: (2X) SAPPHIRE Radeon HD 6950 2GB(x2 crossfirex) GDDR5
CPU: AMD Phenom II X4 965 Black Edition Deneb 3.4GHz (oced to 3.8GHz)
RAM: G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (oced 1833 MHz)
HARD DISK: x2 Western Digital Caviar 500GB (RAID 0) and 2 2tb Western digital mass storage drives
OS: Microsoft Windows 7 Home Premium 64-bit
HEAT SINK: Cooler Master Hyper TX3 "heatpipe direct contact" CPU Cooler RR-910-HTX3-G1

---

Last edited by chewyone; December 22nd, 2009 at 09:45..

[chewyone]

still need help on this btw!

__________________

CASE: COOLER MASTER HAF 932 Blue RC-932-KKN3-GP Black Steel ATX Full Tower Computer Case
MOBO: GIGABYTE GA-790FXTA-UD5
GPU: (2X) SAPPHIRE Radeon HD 6950 2GB(x2 crossfirex) GDDR5
CPU: AMD Phenom II X4 965 Black Edition Deneb 3.4GHz (oced to 3.8GHz)
RAM: G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (oced 1833 MHz)
HARD DISK: x2 Western Digital Caviar 500GB (RAID 0) and 2 2tb Western digital mass storage drives
OS: Microsoft Windows 7 Home Premium 64-bit
HEAT SINK: Cooler Master Hyper TX3 "heatpipe direct contact" CPU Cooler RR-910-HTX3-G1

[drossel]

Select Multi Controller under controllers.

[Gareth1977]

You can't just go to: option>option>controller tab and redefine the controls to use the analog controller?

__________________

Originally Posted by smb123w64gb

it's my Birth day and i have 30 $
on amozon i found a Mb Am3 ddr2 ,and x4 anthom 3.0 ghz

[drossel]

Originally Posted by Gareth1977

You can't just go to: option>option>controller tab and redefine the controls to use the analog controller?

You can, however the analog controller is officially called "Multi Controller", so he may not find it because of this.
And there is also the mission stick, which was a 3-axis traditional analog joystick...