controller stops responding when challenging people to Triple Triad

stryfeman · September 14th, 2009, 15:15

I installed that driver recommended in the getting rumble working for wireless 360 pads thing, and now my controller stops responding if I challenge people to Triple Triad. I don't know if it matters but the set-up for my controller on the control panel has gone from having 12 buttons to 32.
I've tried uninstalling the driver and re-installing the old drivers with no joy

Something else I've noticed, if I try and configure the pad all buttons reconfigure to J1b_UP and d-pad inputs just aren't registering at all

Last edited by stryfeman; September 14th, 2009 at 15:49.. Reason: missed something

Silenus · September 14th, 2009, 16:04

Welcome to the forums.

I'm not sure but did you try hitting f5 I think that changes between analog and digital.
That might help you, again not sure.

Also if all buttons are configured as J1b_UP, there must be a button stuck or something like that, check in the controllers settings in control panel.

__________________

DELL XPS 13 ULTRABOOK

...Mis sueños son mentiras que algun día dejarán de serlo...

stryfeman · September 14th, 2009, 16:16

Thanks, I have tried both of those things and have even tried switching the controllers about using a different 360 controller to no avail, in the properties section of the game controllers the d-pad hat seems to work fine, but when I try and calibrate the controller the dpad gets stuck in the top left, and that has happened on 3 seperate 360 controllers.

I've sorted it out, was a driver error sorry for wasting your time

Last edited by stryfeman; September 14th, 2009 at 16:16.. Reason: Automerged Doublepost

Silenus · September 14th, 2009, 16:43

Ok glad it worked.

__________________

DELL XPS 13 ULTRABOOK

...Mis sueños son mentiras que algun día dejarán de serlo...

September 14th, 2009, 15:15	#1
stryfeman Join Date: Jan 2007 Location: England Posts: 2	controller stops responding when challenging people to Triple Triad I installed that driver recommended in the getting rumble working for wireless 360 pads thing, and now my controller stops responding if I challenge people to Triple Triad. I don't know if it matters but the set-up for my controller on the control panel has gone from having 12 buttons to 32. I've tried uninstalling the driver and re-installing the old drivers with no joy Something else I've noticed, if I try and configure the pad all buttons reconfigure to J1b_UP and d-pad inputs just aren't registering at all Last edited by stryfeman; September 14th, 2009 at 15:49.. Reason: missed something

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

September 14th, 2009, 16:04	#2
Silenus Pilgrim Join Date: Apr 2005 Location: Hyperion Posts: 6,895	Welcome to the forums. I'm not sure but did you try hitting f5 I think that changes between analog and digital. That might help you, again not sure. Also if all buttons are configured as J1b_UP, there must be a button stuck or something like that, check in the controllers settings in control panel. __________________ DELL XPS 13 ULTRABOOK ...Mis sueños son mentiras que algun día dejarán de serlo...

September 14th, 2009, 16:16	#3
stryfeman Join Date: Jan 2007 Location: England Posts: 2	Thanks, I have tried both of those things and have even tried switching the controllers about using a different 360 controller to no avail, in the properties section of the game controllers the d-pad hat seems to work fine, but when I try and calibrate the controller the dpad gets stuck in the top left, and that has happened on 3 seperate 360 controllers. I've sorted it out, was a driver error sorry for wasting your time Last edited by stryfeman; September 14th, 2009 at 16:16.. Reason: Automerged Doublepost

September 14th, 2009, 16:43	#4
Silenus Pilgrim Join Date: Apr 2005 Location: Hyperion Posts: 6,895	Ok glad it worked. __________________ DELL XPS 13 ULTRABOOK ...Mis sueños son mentiras que algun día dejarán de serlo...