Xbox networking

**blueshogun96** · May 26th, 2008, 16:55

Anyone here good with setting up networks to the Xbox? Or just good at networking in general? I've been trying to setup this network between my PC and my debug Xbox for a while, but it acts rather funny. You see, the network only works when I plug in the network cables into my router (one going to my PC, another going to the Xbox, and the 3rd going to my broadband router). Now that I'm using wireless broadband (via usb card), the network between my PC and Xbox doesn't work anymore. I admit I'm a complete noob when it comes to this networking stuff. This sucks. Any ideas? Thanks.

__________________

Official Website of Shogun3D's RyuAwai!

Shogun3D Game Development Blog

Zengjük a Dalt: Manliest Song Ever!

JJXB · May 26th, 2008, 21:30

i use a wired connection to my router on both my xbox and pc (and my xbox can be a debug xbox). the connection works fine for me when doing stuff through the xbox neighbourhood. i'd say try to stick with wired connections for debugging purposes.

__________________

~Ceramic White Phat PSP Status~
FW: 5.50 GEN-D3
Memory Stick: 8gb

**patrickvl** · May 27th, 2008, 00:19

Just a few things you might want to check / read up on:

check if you've got DHCP enabled in your modem/router
configure your firewall to allow the Xbox's IP address (or disable the firewall)
try to ping the different IP addresses (which can be retrieved via ipconfig)
if you want to access a share on windows, create at least one user-account with a password
Use google, to find sites like Networking your Xbox and Build An Xbox Media Center, Part 2: Wireless Connection

Good luck!

Last edited by patrickvl; May 27th, 2008 at 00:22.. Reason: another helpfull URL

**shadow_tj** · May 27th, 2008, 07:36

Shogun, first thing..

debugging true wifi to your xbox. this i can tell yah... then yah waiting for problems.
best thing for xbox - pc connection is with wire.

If you dont have a router annymore, but still got a ethernet adapter in your pc.
or on your mainbord. then you can make Cross-Cable connection.

Making ethernet cables is easy. the only thing you need is are the tools.

For normal ethernet cable.

Take the cat5 cable.... make it the length you wanne. strip the end off..
START WITH one side a time.

Then take the colers appart... green / reen white , Yellow / white yellow

Remember in wich collors you take them appart... cut it off so you have a flat piece off connecters about 1cm.
place the socket on it and make it fit with the cable tool.

For normal cables. you do the same on the other hand.
for cross cables you need to switch cable 1-3 and 2-6

so easy it is to make ethernet cables. and for 2 euro yah got very long cables with no packet loss connections :P

**blueshogun96** · May 29th, 2008, 06:08

Finally got it working

The technique was rather messy, but it works. I just used a second network adapter, then plugged the cables in from both adapters from my PC to the router, then connected a 3rd one to my Xbox.

__________________

Official Website of Shogun3D's RyuAwai!

Shogun3D Game Development Blog

Zengjük a Dalt: Manliest Song Ever!

May 26th, 2008, 16:55	#1
blueshogun96 Last Xbox Emu Author Join Date: Jun 2004 Location: Seattle, WA, USA Posts: 5,853	Xbox networking Anyone here good with setting up networks to the Xbox? Or just good at networking in general? I've been trying to setup this network between my PC and my debug Xbox for a while, but it acts rather funny. You see, the network only works when I plug in the network cables into my router (one going to my PC, another going to the Xbox, and the 3rd going to my broadband router). Now that I'm using wireless broadband (via usb card), the network between my PC and Xbox doesn't work anymore. I admit I'm a complete noob when it comes to this networking stuff. This sucks. Any ideas? Thanks. __________________ Official Website of Shogun3D's RyuAwai! Shogun3D Game Development Blog Zengjük a Dalt: Manliest Song Ever!

May 27th, 2008, 00:19	#3
patrickvl Emu author Join Date: May 2008 Location: Netherlands (GMT+1) Posts: 415	Just a few things you might want to check / read up on: check if you've got DHCP enabled in your modem/router configure your firewall to allow the Xbox's IP address (or disable the firewall) try to ping the different IP addresses (which can be retrieved via ipconfig) if you want to access a share on windows, create at least one user-account with a password Use google, to find sites like Networking your Xbox and Build An Xbox Media Center, Part 2: Wireless Connection Good luck! Last edited by patrickvl; May 27th, 2008 at 00:22.. Reason: another helpfull URL

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 26th, 2008, 21:30	#2
JJXB I Am Merely A Pawn... Join Date: Dec 2006 Location: UK Posts: 826	i use a wired connection to my router on both my xbox and pc (and my xbox can be a debug xbox). the connection works fine for me when doing stuff through the xbox neighbourhood. i'd say try to stick with wired connections for debugging purposes. __________________ ~Ceramic White Phat PSP Status~ FW: 5.50 GEN-D3 Memory Stick: 8gb

May 27th, 2008, 07:36	#4
shadow_tj Emu author Join Date: Jul 2003 Location: Netherlands Posts: 905	Shogun, first thing.. debugging true wifi to your xbox. this i can tell yah... then yah waiting for problems. best thing for xbox - pc connection is with wire. If you dont have a router annymore, but still got a ethernet adapter in your pc. or on your mainbord. then you can make Cross-Cable connection. Making ethernet cables is easy. the only thing you need is are the tools. For normal ethernet cable. Take the cat5 cable.... make it the length you wanne. strip the end off.. START WITH one side a time. Then take the colers appart... green / reen white , Yellow / white yellow Remember in wich collors you take them appart... cut it off so you have a flat piece off connecters about 1cm. place the socket on it and make it fit with the cable tool. For normal cables. you do the same on the other hand. for cross cables you need to switch cable 1-3 and 2-6 so easy it is to make ethernet cables. and for 2 euro yah got very long cables with no packet loss connections :P

May 29th, 2008, 06:08	#5
blueshogun96 Last Xbox Emu Author Join Date: Jun 2004 Location: Seattle, WA, USA Posts: 5,853	Finally got it working The technique was rather messy, but it works. I just used a second network adapter, then plugged the cables in from both adapters from my PC to the router, then connected a 3rd one to my Xbox. __________________ Official Website of Shogun3D's RyuAwai! Shogun3D Game Development Blog Zengjük a Dalt: Manliest Song Ever!