Controller problem

SeanMolo · July 21st, 2012, 20:34

Hi, I have 2 XBOX controllers. One is wired, the other is wireless but connected through a plug and play kit.

That's kind of irrelevant, as I've had various USB gamepads before, I could only ever use one controller. I'm not able to play 2 player, when I enter the config, the second controller does nothing to change the options.

I've gone through the steps;

Port 1 - Pad 1 - Dual Analog - DX Joy 1 - Works fines.

Port 2 - Pad 1 - Dual Analog - DX Joy 2 - Nothing.

What am I doing wrong?

**ShendoXT** · July 21st, 2012, 23:37

DX Joy settings are for the rumble only. To configure keys you must press the
box corresponding to each key and then press a button on the controller.

July 21st, 2012, 20:34	#1
SeanMolo Registered User Join Date: Jul 2012 Posts: 1	Controller problem Hi, I have 2 XBOX controllers. One is wired, the other is wireless but connected through a plug and play kit. That's kind of irrelevant, as I've had various USB gamepads before, I could only ever use one controller. I'm not able to play 2 player, when I enter the config, the second controller does nothing to change the options. I've gone through the steps; Port 1 - Pad 1 - Dual Analog - DX Joy 1 - Works fines. Port 2 - Pad 1 - Dual Analog - DX Joy 2 - Nothing. What am I doing wrong?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

July 21st, 2012, 23:37	#2
ShendoXT Moderator Join Date: Feb 2006 Location: Croatia Posts: 4,548	DX Joy settings are for the rumble only. To configure keys you must press the box corresponding to each key and then press a button on the controller. __________________ Shendo's software blog Core i5 2400 3.1 Ghz \| ASRock H67M \| GTX460 768Mb \| 8GB DDR3 1333 \| 1500 Gb HDD Grundig VLC 7121 C (1080p) 32" \| Razer DeathAdder \| Logitech G110 \| Windows 7 x64 Don't PM or ask me about VMP-MCR conversions. I will ignore you if you do.