Can't get past the first screen without crashing

Rsjc852 · June 4th, 2012, 05:44

So I finally managed to find a reason to download and install epsxe

I noted that it's horribly outdated and should probably be rewritten, but what can you do but make do?

Anyways, I went through the wizard and filled out the graphics properties.
Maxed out

When I tried to load the BIOS (or for that matter, anything), ePSXe would crash on me.

So I used a default graphics settings for both the graphical configurations.

Still no luck.

Here's my system specs.. I don't think there should be a problem.

Asus M5A97 Mobo -- If anything like south bus, etc, is over-clockable, it is.
16GB Vengence series RAM -- OC'd
AMD FX-8150 (8-core) -- OC'd from 3.6Ghz(factory spec) to 4.7Ghz
Nvidia PNY XLR8 GTX 560 Ti -- Factory OC'd
128GB SSD (what ePSXe is on) (C:\)
1Tb drive (D:\)
HP USB DL DVD-RW (E:\)

Despite the insane amount of overclocking.. it runs stable and never overheats. (8 fans, liquid cooled CPU)

What I plan on doing is running Tekken 2, Croc, Ape Escape, and Spyro: RR off the USB DVD drive(which is essentially brand new). It reads fine.

I'll try messing around with some other settings, but if someone can help me out, that'd be great~

Rsjc852 · June 4th, 2012, 06:15

I did a log of the program.. here it is:
(some parts will be edited to save me time)

*Running ePSXe emulator version 1.7.0.
*Memory handlers init
*eSPXe: PSX BIOS loaded (path)
*Init Core W2K cdrom .... (E) ok
*scsi command error = 6 handle = FFFFFFFF
(times the previous error by 50)
*getrackinfo error(4)
*scsi command error = 6 handle = FFFFFFFF
*scsi command error = 6 handle = FFFFFFFF
*Doing init gpu(0)...
*Gpu open(0)...
*Direct input init ok.
*Init core spu ... ok
(crashes here)

June 4th, 2012, 05:44	#1
Rsjc852 Registered User Join Date: Jun 2012 Location: Atlanta Posts: 2	Can't get past the first screen without crashing So I finally managed to find a reason to download and install epsxe I noted that it's horribly outdated and should probably be rewritten, but what can you do but make do? Anyways, I went through the wizard and filled out the graphics properties. Maxed out When I tried to load the BIOS (or for that matter, anything), ePSXe would crash on me. So I used a default graphics settings for both the graphical configurations. Still no luck. Here's my system specs.. I don't think there should be a problem. Asus M5A97 Mobo -- If anything like south bus, etc, is over-clockable, it is. 16GB Vengence series RAM -- OC'd AMD FX-8150 (8-core) -- OC'd from 3.6Ghz(factory spec) to 4.7Ghz Nvidia PNY XLR8 GTX 560 Ti -- Factory OC'd 128GB SSD (what ePSXe is on) (C:\) 1Tb drive (D:\) HP USB DL DVD-RW (E:\) Despite the insane amount of overclocking.. it runs stable and never overheats. (8 fans, liquid cooled CPU) What I plan on doing is running Tekken 2, Croc, Ape Escape, and Spyro: RR off the USB DVD drive(which is essentially brand new). It reads fine. I'll try messing around with some other settings, but if someone can help me out, that'd be great~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

June 4th, 2012, 06:15	#2
Rsjc852 Registered User Join Date: Jun 2012 Location: Atlanta Posts: 2	I did a log of the program.. here it is: (some parts will be edited to save me time) Running ePSXe emulator version 1.7.0. Memory handlers init eSPXe: PSX BIOS loaded (path) Init Core W2K cdrom .... (E) ok scsi command error = 6 handle = FFFFFFFF (times the previous error by 50) getrackinfo error(4) scsi command error = 6 handle = FFFFFFFF scsi command error = 6 handle = FFFFFFFF Doing init gpu(0)... Gpu open(0)... Direct input init ok. Init core spu ... ok (crashes here)