NextGL v1.6

MC_Renzy · November 19th, 2001, 23:21

This new plugin wont let me save my changes. I cant put in frame limiting or go to full screen. I click on save after I made the changes but when I go back in and check, its set back to default. Any ideas?

**Ryos** · November 19th, 2001, 23:44

I don't know the solution, but this should be in Misc PSX Emu discussion, so that's where I'm moving it.

__________________
Sanity is overrated.

MC_Renzy · November 19th, 2001, 23:59

Acutally it would of been more accuarte throwing it in Plugin Troubleshooting

**Ryos** · November 20th, 2001, 00:03

Well, if you want it wrt ePSXe, I guess. You didn't specify it.

__________________
Sanity is overrated.

**kairi00** · November 20th, 2001, 03:44

Quote:

Originally posted by MC_Renzy
This new plugin wont let me save my changes. I cant put in frame limiting or go to full screen. I click on save after I made the changes but when I go back in and check, its set back to default. Any ideas?

Someone asked this question before.... I think the solution is to delete the settings for NextGL in the registry, and redo it again. Try doing a search on NextGL on this forum....

__________________
"Not every ejaculation deserves a name."

--- George Carlin

Prafull · November 20th, 2001, 04:06

I think that was the exact problem that was sorted out in in next gl 1.5g version.I think either nickk forget to correct in new version too or may be you will have to delete the registry key first.
It used to occur if you tried the plugin using epsxecutor or pcsx.
You can search the threads for more discussion about it.

__________________

MC_Renzy · November 20th, 2001, 04:13

Ya I usually always search the threads for the info but none of what was said helped. I wanted to try this plugin on the only two games I have, ff9 and chrono trigger. Is this plugin any good for these games? It was just updated yesterday and I wanted to see how it would fare up against petes opengl. If its no good for the two games I've listed, please let me know so I dont waste anymore time trying to get it to work. Thanks.

**NickK** · November 20th, 2001, 04:43

Hmm another cfg problem? Maybe I should redesign the cfg system

__________________
[sig=54]
[sig=253]

**NickK** · November 20th, 2001, 04:49

Um, hey. It'll probably be fixed sometime. I was just thinking that something really stupid is causing the problem (as usual)

Oh well, I'll have to investigate later.

__________________
[sig=54]
[sig=253]

Tbone · November 21st, 2001, 05:31

Ditto what MC_Renzy said. I'm running XP Pro RC-2. Yeah, yeah, I need to get the final version, I know

Neither NextGL nor Next3D will remember their settings, whether I do it with epsxe or with epsxecutor.

Anyway, I tried twiddling around with the registry entries manually, but only with limited success. I could kind of get games running in full screen mode, but mainly I just got black screens and lock-ups, which could be due to a lot of things -- improper configuration not being the least

I would really like to be able to use NextGL or Next3D as they both sound like kick ar$e GPUs (no, I'm not British, it just sounded right). If he weren't already going open source, I'd recommend that you work with Pete to make the GPU to end all GPUs.

I couldn't hazard a guess at what is causing this, but I can tell you what it's not. It isn't a permissions problem because I'm running around with admin rights (which is crazy in its own respect, but oh well). And it doesn't seem to be a failure to write the settings to the registry. It's a little hard to tell, but it looks like the settings are written to the registry, but as soon as you bring up any of the configuration windows, it wipes them all out again. For example, if you configure "screen settings", those changes are written to the registry, but as soon as you open "frame limiting" the settings all go back to default. Moreover, it looks like there is an issue reading from the registry since the settings are all blank even though the default values should cause something to be checked or selected even if the settings are wiped out each time.

Well, I hope this helps. I'm really looking forward to getting to use this plugin some day.

Viperx25 · November 27th, 2001, 17:18

Hi Everyone,

I have the same problem with NextGL 1.6. I've played around with it a bit and i have gotten it to work by just editing the registry keys. It appears that when you try to change settings from the plugin's setup, it disables most things including the texture caches. I just deleted the NextGL registry entry and all keys, went to the nextgl config but didn't change anything. then i went in and edited the keys.

I have attached a Registy file with the keys i used. I use WinXP PRO tho so i dont' know if this file will not work on anything but?

It's basically NextGL's defualts with fullscreen enabled and 32 bpp.

hope this helps!

Attached Files

nextglkeys.zip (667 Bytes, 22 views)

__________________
My System Specs:

Viewsonic E790B 19" Monitor
MSI 865PE Neo2 - FIS2R
P4 3.2Ghz HTT
Thermaltake Spark 7 HSF
2x512mb Kingston HyperX DDR400Mhz
Leadtek A350 TDH Ultra (FX 5900 Ultra)
(480Mhz core, 930Mhz memory)
35GB Maxtor/Quantum Ultra160 SCSI
Sound Blaster Audigy 2 ZS
Antec Performance Plus 660B case
400 Watt PSU
WinXP Pro

**NickK** · December 3rd, 2001, 02:50

Quote:

Originally posted by Tbone
And it doesn't seem to be a failure to write the settings to the registry. It's a little hard to tell, but it looks like the settings are written to the registry, but as soon as you bring up any of the configuration windows, it wipes them all out again. For example, if you configure "screen settings", those changes are written to the registry, but as soon as you open "frame limiting" the settings all go back to default. Moreover, it looks like there is an issue reading from the registry since the settings are all blank even though the default values should cause something to be checked or selected even if the settings are wiped out each time.

Well, I hope this helps. I'm really looking forward to getting to use this plugin some day.

Thanks for the info. I'll look at that soon

__________________
[sig=54]
[sig=253]

November 19th, 2001, 23:21	#1
MC_Renzy Banned Join Date: Nov 2001 Posts: 48	NextGL v1.6 This new plugin wont let me save my changes. I cant put in frame limiting or go to full screen. I click on save after I made the changes but when I go back in and check, its set back to default. Any ideas?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

November 19th, 2001, 23:44	#2
Ryos Bearsona Join Date: May 2001 Location: Nowhere Posts: 11,307	I don't know the solution, but this should be in Misc PSX Emu discussion, so that's where I'm moving it. __________________ Sanity is overrated.

November 19th, 2001, 23:59	#3
MC_Renzy Banned Join Date: Nov 2001 Posts: 48	Acutally it would of been more accuarte throwing it in Plugin Troubleshooting

November 20th, 2001, 00:03	#4
Ryos Bearsona Join Date: May 2001 Location: Nowhere Posts: 11,307	Well, if you want it wrt ePSXe, I guess. You didn't specify it. __________________ Sanity is overrated.

November 20th, 2001, 04:06	#6
Prafull Registered User Join Date: Aug 2001 Location: India Posts: 5,429	I think that was the exact problem that was sorted out in in next gl 1.5g version.I think either nickk forget to correct in new version too or may be you will have to delete the registry key first. It used to occur if you tried the plugin using epsxecutor or pcsx. You can search the threads for more discussion about it. __________________

November 20th, 2001, 04:13	#7
MC_Renzy Banned Join Date: Nov 2001 Posts: 48	Ya I usually always search the threads for the info but none of what was said helped. I wanted to try this plugin on the only two games I have, ff9 and chrono trigger. Is this plugin any good for these games? It was just updated yesterday and I wanted to see how it would fare up against petes opengl. If its no good for the two games I've listed, please let me know so I dont waste anymore time trying to get it to work. Thanks.

November 20th, 2001, 04:43	#8
NickK Emu author Join Date: Jul 2001 Posts: 1,756	Hmm another cfg problem? Maybe I should redesign the cfg system __________________ [sig=54] [sig=253]

November 20th, 2001, 04:49	#9
NickK Emu author Join Date: Jul 2001 Posts: 1,756	Um, hey. It'll probably be fixed sometime. I was just thinking that something really stupid is causing the problem (as usual) Oh well, I'll have to investigate later. __________________ [sig=54] [sig=253]

November 21st, 2001, 05:31	#10
Tbone Registered User Join Date: Sep 2001 Posts: 2	Ditto what MC_Renzy said. I'm running XP Pro RC-2. Yeah, yeah, I need to get the final version, I know Neither NextGL nor Next3D will remember their settings, whether I do it with epsxe or with epsxecutor. Anyway, I tried twiddling around with the registry entries manually, but only with limited success. I could kind of get games running in full screen mode, but mainly I just got black screens and lock-ups, which could be due to a lot of things -- improper configuration not being the least I would really like to be able to use NextGL or Next3D as they both sound like kick ar$e GPUs (no, I'm not British, it just sounded right). If he weren't already going open source, I'd recommend that you work with Pete to make the GPU to end all GPUs. I couldn't hazard a guess at what is causing this, but I can tell you what it's not. It isn't a permissions problem because I'm running around with admin rights (which is crazy in its own respect, but oh well). And it doesn't seem to be a failure to write the settings to the registry. It's a little hard to tell, but it looks like the settings are written to the registry, but as soon as you bring up any of the configuration windows, it wipes them all out again. For example, if you configure "screen settings", those changes are written to the registry, but as soon as you open "frame limiting" the settings all go back to default. Moreover, it looks like there is an issue reading from the registry since the settings are all blank even though the default values should cause something to be checked or selected even if the settings are wiped out each time. Well, I hope this helps. I'm really looking forward to getting to use this plugin some day.