Problem W/ SSF 007 pt R9 & Satourne 1.1P

poursoul · April 13th, 2004

When ever i run the SSF executable i recieve this error:

http://www.angelfire.com/creep/ziganm/error.jpg

Also Satourne 1.1P does not recognize that ASPI is installed on my system. I have used both Adaptec's and Nero's ASPI drivers, both of which worked fine with Satourne 1.0.2P. I have also tried compatibility mode (Win95 and 98/ME) still no go.

My Specs:

WinXP SP1
P4 1.6 Intel 845 Chipset
GF4 Ti4200

EDIT: I take it by your silence that i need to be schooled in the ways of finding things out on my own, so let me inform you on what i have tried and perhaps you will be more helpful.

As far as the SFF problem goes, it is not the same error as far as naming the saturn bios to the correct name (i have tried every possible combination.) I obtained SSF 007 prototype R5 and have gotten it to work correctly so i will assume that i am not completely retarded. But that will not fix my problem of getting the newest version to work correctly. I have also searched your forum, but beings how 007 PT R9 was just released there wasn't much to find.

As far as the Satourne problem goes. I have already stated what i have done, but in addition, i have also searched your forum and made google my friend again. All to no avail.

All i'm asking for is ideas not solutions, i don't expect the authors of these emus to just pop in and say what's wrong.

BTW: How's it going Serath, i never see you on nvnews anymore. Also i heard that VampireUK is pretty active in the emu community, so hey to him as well.

**Runik** · April 15th, 2004

I have the same problem with SSF, there's something about it on the forum, but as I can't read japanese I don't know what it says ...
For Satourne the problem occurs on some configurations, and Fabien don't know why it's happening.

poursoul · April 15th, 2004

Thanks a lot for the reply, i'll try a translater on the forum and i'll let you know what's going on ok.

EDIT: Went through http://world.altavista.com/ and tried japanese, trad chinese, and simp. chinese, and none of them worked. oh well.

Anyone else have any thoughts?

EDIT 2: Hey i just noticed that you're an emu author, what emu are you currently working on?

April 13th, 2004	#1 (permalink)
poursoul Registered User Join Date: Apr 2004 Posts: 35	Problem W/ SSF 007 pt R9 & Satourne 1.1P When ever i run the SSF executable i recieve this error: http://www.angelfire.com/creep/ziganm/error.jpg Also Satourne 1.1P does not recognize that ASPI is installed on my system. I have used both Adaptec's and Nero's ASPI drivers, both of which worked fine with Satourne 1.0.2P. I have also tried compatibility mode (Win95 and 98/ME) still no go. My Specs: WinXP SP1 P4 1.6 Intel 845 Chipset GF4 Ti4200 EDIT: I take it by your silence that i need to be schooled in the ways of finding things out on my own, so let me inform you on what i have tried and perhaps you will be more helpful. As far as the SFF problem goes, it is not the same error as far as naming the saturn bios to the correct name (i have tried every possible combination.) I obtained SSF 007 prototype R5 and have gotten it to work correctly so i will assume that i am not completely retarded. But that will not fix my problem of getting the newest version to work correctly. I have also searched your forum, but beings how 007 PT R9 was just released there wasn't much to find. As far as the Satourne problem goes. I have already stated what i have done, but in addition, i have also searched your forum and made google my friend again. All to no avail. All i'm asking for is ideas not solutions, i don't expect the authors of these emus to just pop in and say what's wrong. BTW: How's it going Serath, i never see you on nvnews anymore. Also i heard that VampireUK is pretty active in the emu community, so hey to him as well. Last edited by poursoul; April 14th, 2004 at 18:05.

April 15th, 2004	#3 (permalink)
poursoul Registered User Join Date: Apr 2004 Posts: 35	Thanks a lot for the reply, i'll try a translater on the forum and i'll let you know what's going on ok. EDIT: Went through http://world.altavista.com/ and tried japanese, trad chinese, and simp. chinese, and none of them worked. oh well. Anyone else have any thoughts? EDIT 2: Hey i just noticed that you're an emu author, what emu are you currently working on? Last edited by poursoul; April 16th, 2004 at 19:16.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

April 15th, 2004	#2 (permalink)
Runik Emu author Join Date: Aug 2003 Location: France Posts: 116	I have the same problem with SSF, there's something about it on the forum, but as I can't read japanese I don't know what it says ... For Satourne the problem occurs on some configurations, and Fabien don't know why it's happening.