Chrono Cross and OpenGL2 2.7

Rundra · October 27th, 2005

I'm having a problem with Chrono Cross and Pete's OpenGL2 plugin, it's a small problem but I was wondering if you guys could help me with it. During battle, your current elemental grid level is supposed to flash, but for me it either stays lit up or remains darkened. Switching to any of the other graphical plugins solves this problem. I've tryed turning on and off pretty much every option and nothing has worked. Has anyone else had this problem before?

**hushypushy** · October 27th, 2005

try turning up offscreen drawing? post your current config.

Rundra · October 27th, 2005

Ok, here's my config...

Plugin: Pete's OpenGL2 Driver 2.7
Author: Pete Bernert
Card vendor: ATI Technologies Inc.
GFX card: RADEON X800 XT Platinum Edition x86/SSE2

Resolution/Color:
- 1024x768 Fullscreen - NO desktop changing
- Internal X resolution: 1
- Internal Y resolution: 2
- Keep psx aspect ratio: off
- No render-to-texture: on

- Filtering: 0
- Hi-Res textures: 0
- TexWin pixel shader: on
- VRam size: 256 MBytes

Framerate:
- FPS limitation: on
- Frame skipping: off
- FPS limit: 60.0

Compatibility:
- Offscreen drawing: 1
- Framebuffer effects: 2
- Framebuffer uploads: 1

Misc:
- Scanlines: off
- Mdec filter: off
- Screen filtering: off
- Shader effects: 5/2
- Flicker-fix border size: 0
- GF4/XP crash fix: off
- Game fixes: on [00001000]

I tried turning up offscreen drawing but it didn't help. I've also tried running it in ePSXe and SSSPSX, both from the disc and an ISO, and it still does it. I might be forced to use one of the other plugins, but it's odd that the older OpenGL plugin works fine. Can anyone that has Chrono Cross test it with the OpenGL2 2.7 driver to see if it works properly for them?

dbhankins · October 27th, 2005

Tried this config?

http://www.ngemu.com/forums/showthread.php?t=65320

Dan

Rundra · October 27th, 2005

Tried that config, still have the problem. I even tried changing the refresh rate on my monitor. The OpenGL2 driver works fine with every other game I've tried, so it can't be that big of a problem. I guess I'll just use one of the other drivers when playing this game. Thanks for the replies guys.

**hushypushy** · October 27th, 2005

make sure Vsync is off too, and turn off "no render to texture". you may want to try turning off shaders too.

October 27th, 2005	#1 (permalink)
Rundra Registered User Join Date: Oct 2005 Location: U.S.A Posts: 3	Chrono Cross and OpenGL2 2.7 I'm having a problem with Chrono Cross and Pete's OpenGL2 plugin, it's a small problem but I was wondering if you guys could help me with it. During battle, your current elemental grid level is supposed to flash, but for me it either stays lit up or remains darkened. Switching to any of the other graphical plugins solves this problem. I've tryed turning on and off pretty much every option and nothing has worked. Has anyone else had this problem before?

October 27th, 2005	#2 (permalink)
hushypushy the only one you've ever SEEN Join Date: May 2003 Location: San Francisco Posts: 21,837	try turning up offscreen drawing? post your current config. __________________ Dedicated to mediocrity and repetition since 1994. 2008 "How Not to Post" guide

October 27th, 2005	#6 (permalink)
hushypushy the only one you've ever SEEN Join Date: May 2003 Location: San Francisco Posts: 21,837	make sure Vsync is off too, and turn off "no render to texture". you may want to try turning off shaders too. __________________ Dedicated to mediocrity and repetition since 1994. 2008 "How Not to Post" guide

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

October 27th, 2005	#3 (permalink)
Rundra Registered User Join Date: Oct 2005 Location: U.S.A Posts: 3	Ok, here's my config... Plugin: Pete's OpenGL2 Driver 2.7 Author: Pete Bernert Card vendor: ATI Technologies Inc. GFX card: RADEON X800 XT Platinum Edition x86/SSE2 Resolution/Color: - 1024x768 Fullscreen - NO desktop changing - Internal X resolution: 1 - Internal Y resolution: 2 - Keep psx aspect ratio: off - No render-to-texture: on - Filtering: 0 - Hi-Res textures: 0 - TexWin pixel shader: on - VRam size: 256 MBytes Framerate: - FPS limitation: on - Frame skipping: off - FPS limit: 60.0 Compatibility: - Offscreen drawing: 1 - Framebuffer effects: 2 - Framebuffer uploads: 1 Misc: - Scanlines: off - Mdec filter: off - Screen filtering: off - Shader effects: 5/2 - Flicker-fix border size: 0 - GF4/XP crash fix: off - Game fixes: on [00001000] I tried turning up offscreen drawing but it didn't help. I've also tried running it in ePSXe and SSSPSX, both from the disc and an ISO, and it still does it. I might be forced to use one of the other plugins, but it's odd that the older OpenGL plugin works fine. Can anyone that has Chrono Cross test it with the OpenGL2 2.7 driver to see if it works properly for them?

October 27th, 2005	#4 (permalink)
dbhankins Registered User Join Date: Aug 2005 Location: Phoenix, Arizona, USA Posts: 654	Tried this config? http://www.ngemu.com/forums/showthread.php?t=65320 Dan

October 27th, 2005	#5 (permalink)
Rundra Registered User Join Date: Oct 2005 Location: U.S.A Posts: 3	Tried that config, still have the problem. I even tried changing the refresh rate on my monitor. The OpenGL2 driver works fine with every other game I've tried, so it can't be that big of a problem. I guess I'll just use one of the other drivers when playing this game. Thanks for the replies guys.