Input problem

Dime333 · August 11th, 2006

The emu crashes and I get this error message when I try to start pSX when I have my EMS USB2 PSX-PC adapter connected. If I disconnect it adapter, pSX starts without a problem. It worked fine a couple of versions back. I think 1.5 worked.

**Shendo** · August 12th, 2006

Set the controller type to "SCPH-1010: Normal pad".

And if you have installed drivers for that device try to reinstall it or try to
use the adapter without them (you will then loose rumble support but pSX might work then).

Dime333 · August 12th, 2006

Both controllers are already set to normal, but it worked after I removed the drivers for the adapter. I hope this will be fixed in a future version though. Thanx.

**Shendo** · August 12th, 2006

Yeah, but i think that this is not a pSX problem, i too have PSX-->USB adapter
and if I install driver I always get input.dll crashes... (with every psx emu and some pc games and programs)
i think that drivers are too old and they need to be updated.

Dime333 · August 12th, 2006

I think this is a pSX problem since I have never had any problems running any emu or game before, and older versions of pSX work fine. Well, at least it's working now.

**Shendo** · August 12th, 2006

Well that was just my opinion... if you want you can tell pSX Author about that problem on his forum.

Dime333 · August 13th, 2006

I tried that, but I didn't manage to attach an image to the thread. And typing the whole message would take all day.

August 12th, 2006	#2 (permalink)
Shendo PSX dev Join Date: Feb 2006 Location: Croatia Posts: 3,709	Set the controller type to "SCPH-1010: Normal pad". And if you have installed drivers for that device try to reinstall it or try to use the adapter without them (you will then loose rumble support but pSX might work then). __________________ [ www.shendo.ngemu.com ]

August 12th, 2006	#4 (permalink)
Shendo PSX dev Join Date: Feb 2006 Location: Croatia Posts: 3,709	Yeah, but i think that this is not a pSX problem, i too have PSX-->USB adapter and if I install driver I always get input.dll crashes... (with every psx emu and some pc games and programs) i think that drivers are too old and they need to be updated. __________________ [ www.shendo.ngemu.com ]

August 12th, 2006	#6 (permalink)
Shendo PSX dev Join Date: Feb 2006 Location: Croatia Posts: 3,709	Well that was just my opinion... if you want you can tell pSX Author about that problem on his forum. __________________ [ www.shendo.ngemu.com ]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

August 12th, 2006	#3 (permalink)
Dime333 Registered User Join Date: Apr 2004 Posts: 17	Both controllers are already set to normal, but it worked after I removed the drivers for the adapter. I hope this will be fixed in a future version though. Thanx.

August 12th, 2006	#5 (permalink)
Dime333 Registered User Join Date: Apr 2004 Posts: 17	I think this is a pSX problem since I have never had any problems running any emu or game before, and older versions of pSX work fine. Well, at least it's working now.

August 13th, 2006	#7 (permalink)
Dime333 Registered User Join Date: Apr 2004 Posts: 17	I tried that, but I didn't manage to attach an image to the thread. And typing the whole message would take all day.