Nyko Air Flo EX Controller for Vista (pSX help)

EderraFan · May 12th, 2009

Hello everyone.
It's been a while since I've asked for help on this site, so I thought I should go to this forum for my questions.

So, I'm playing pSX and I have Nyko Air Flo EX controller, and I was wondering how I could get it to work WITH pSX.
Any help would do, please.
Also, if you can't do anything about the Nyko, I have a Cyborg Rumble controller.

If you can help me get one of these controllers working, I'd be very happy and it would be appreciated greatly.

EderraFan~
Thanks for your time ^^

__________________

Code:


Clicky me!

**jonc2006** · May 12th, 2009

i happen to have the very same controller so you might be in luck, it works fine for me with psx though. did you install the drivers that were on the disc it came with? are you able to map to it at all in psx or does it just not respond to anything?

also make sure you have read over everything in the FAQ as well, there might be something you are overlooking- Frequently Asked Questions

__________________

Antec 900/Antec Truepower Quattro 1000W/eVGA 780i SLI/Windows XP Media SP2 & Windows Vista Ultimate 32-bit SP1/Intel Core 2 Duo E8400@4.0GHz/Dual eVGA e-Geforce GTX280 1GB DDR3 SLI Enabled/Creative SB X-Fi XtremeGamer/Corsiar XMS2 4GB (2x2GB) PC2-6400 DDR2/Dual WD Caviar SE16 500GB 7200RPM HDDs

The Official jonc2006™ Emotion Chart.
Courtesy of PCXL-Fan after he tried to steal my identity on Steam because I am so awesome.
Official jonc2006™ Fan Club
Official jonc2006™ Trophy Collection

EderraFan · May 12th, 2009

Ah, no, see my older brother gave me the controller, so I don't have the Cds or drivers.
Is there a way to get them off the internet?

__________________

Code:


Clicky me!

**jonc2006** · May 12th, 2009

most likely, check nyko's website and look for a support area that would let you search for product drivers.

__________________

Antec 900/Antec Truepower Quattro 1000W/eVGA 780i SLI/Windows XP Media SP2 & Windows Vista Ultimate 32-bit SP1/Intel Core 2 Duo E8400@4.0GHz/Dual eVGA e-Geforce GTX280 1GB DDR3 SLI Enabled/Creative SB X-Fi XtremeGamer/Corsiar XMS2 4GB (2x2GB) PC2-6400 DDR2/Dual WD Caviar SE16 500GB 7200RPM HDDs

The Official jonc2006™ Emotion Chart.
Courtesy of PCXL-Fan after he tried to steal my identity on Steam because I am so awesome.
Official jonc2006™ Fan Club
Official jonc2006™ Trophy Collection

EderraFan · May 13th, 2009

Alright, I'll try it ^^

Hey, thanks, that helped me alot!
I tried to look for the drivers stuff before, but I couldn't find any!
But thank you, now it works fine fo pSX ^^

__________________

Code:


Clicky me!

Last edited by EderraFan; May 13th, 2009 at 02:06..

May 12th, 2009	#1 (permalink)
EderraFan Magitek Elite Join Date: Jan 2009 Location: Rebus Posts: 187	Nyko Air Flo EX Controller for Vista (pSX help) Hello everyone. It's been a while since I've asked for help on this site, so I thought I should go to this forum for my questions. So, I'm playing pSX and I have Nyko Air Flo EX controller, and I was wondering how I could get it to work WITH pSX. Any help would do, please. Also, if you can't do anything about the Nyko, I have a Cyborg Rumble controller. If you can help me get one of these controllers working, I'd be very happy and it would be appreciated greatly. EderraFan~ Thanks for your time ^^ __________________ Code: Clicky me!

May 12th, 2009	#3 (permalink)
EderraFan Magitek Elite Join Date: Jan 2009 Location: Rebus Posts: 187	Ah, no, see my older brother gave me the controller, so I don't have the Cds or drivers. Is there a way to get them off the internet? __________________ Code: Clicky me!

May 13th, 2009	#5 (permalink)
EderraFan Magitek Elite Join Date: Jan 2009 Location: Rebus Posts: 187	Alright, I'll try it ^^ Hey, thanks, that helped me alot! I tried to look for the drivers stuff before, but I couldn't find any! But thank you, now it works fine fo pSX ^^ __________________ Code: Clicky me! Last edited by EderraFan; May 13th, 2009 at 02:06..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 12th, 2009	#2 (permalink)
jonc2006 Mod of Douchebagness™ Join Date: May 2006 Location: USA MD. Posts: 8,793	i happen to have the very same controller so you might be in luck, it works fine for me with psx though. did you install the drivers that were on the disc it came with? are you able to map to it at all in psx or does it just not respond to anything? also make sure you have read over everything in the FAQ as well, there might be something you are overlooking- Frequently Asked Questions __________________ Antec 900/Antec Truepower Quattro 1000W/eVGA 780i SLI/Windows XP Media SP2 & Windows Vista Ultimate 32-bit SP1/Intel Core 2 Duo E8400@4.0GHz/Dual eVGA e-Geforce GTX280 1GB DDR3 SLI Enabled/Creative SB X-Fi XtremeGamer/Corsiar XMS2 4GB (2x2GB) PC2-6400 DDR2/Dual WD Caviar SE16 500GB 7200RPM HDDs The Official jonc2006™ Emotion Chart. Courtesy of PCXL-Fan after he tried to steal my identity on Steam because I am so awesome. Official jonc2006™ Fan Club Official jonc2006™ Trophy Collection

May 12th, 2009	#4 (permalink)
jonc2006 Mod of Douchebagness™ Join Date: May 2006 Location: USA MD. Posts: 8,793	most likely, check nyko's website and look for a support area that would let you search for product drivers. __________________ Antec 900/Antec Truepower Quattro 1000W/eVGA 780i SLI/Windows XP Media SP2 & Windows Vista Ultimate 32-bit SP1/Intel Core 2 Duo E8400@4.0GHz/Dual eVGA e-Geforce GTX280 1GB DDR3 SLI Enabled/Creative SB X-Fi XtremeGamer/Corsiar XMS2 4GB (2x2GB) PC2-6400 DDR2/Dual WD Caviar SE16 500GB 7200RPM HDDs The Official jonc2006™ Emotion Chart. Courtesy of PCXL-Fan after he tried to steal my identity on Steam because I am so awesome. Official jonc2006™ Fan Club Official jonc2006™ Trophy Collection