Joystick fade

[z270]

I just got a Windows xbox 360 controller (vista 64bit), everything works fine on pSX (though on epsxe the left analog stick doesnt seem to register for some reason). Im trying to play mgs, where at some points i need to walk, which you do by tilting the joystick very slightly.

problem is the game doesnt register it, it just registers it as if im going at 100%.

is this a plugin problem/emu problem or something in calibrating the controller??

i appreciate any help

[Shadow Lady]

Works the same in the PSX console as far as I remember.

__________________

Main Rig: Pentium Dual-Core E2160 @ 2.8GHz -- 9600GT @ 715/1033MHz -- 4GB DDR2-667 4-4-4-12 -- Windows Server 2008 SP2
Collecting dust: AMD Athlon XP 2600+ -- ATI Radeon 9500 Pro -- SB Live 5.1 Digital -- 2.5GB DDR 2-2-2-5 Ram -- Windows 2003 server r2 SP1

[RedLion]

Originally Posted by z270

I just got a Windows xbox 360 controller (vista 64bit), everything works fine on pSX (though on epsxe the left analog stick doesnt seem to register for some reason). Im trying to play mgs, where at some points i need to walk, which you do by tilting the joystick very slightly.

problem is the game doesnt register it, it just registers it as if im going at 100%.

is this a plugin problem/emu problem or something in calibrating the controller??

i appreciate any help

Hum...Have you installed the XBCD drivers(I'm not sure they exist for X64 os and moreover vista but gonna make a search)? Also to be sure, can you post an image of your gamepad config, please?

[Squall-Leonhart]

xbcd is for wired controls only, and since he has doubly ****ed himself by using vista x64 hes likely going to have troubles even with the wired control. However if you go to ngohq you can tell msft to **** itself and install a Driver signing crack that'll remove that limitation, even though the driver is now test signed, you still need to reboot vista in test mode otherwise..

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[RedLion]

Originally Posted by Squall-Leonhart

xbcd is for wired controls only, and since he has doubly ****ed himself by using vista x64 hes likely going to have troubles even with the wired control. However if you go to ngohq you can tell msft to **** itself and install a Driver signing crack that'll remove that limitation, even though the driver is now test signed, you still need to reboot vista in test mode otherwise..

I know. As he didn't precised anything about the pad, I supposed it was wired. Now for drivers for X64....


Haruhi GTFO!

[ShendoXT]

Snake does not walk.

__________________

C2D E8400 3.00 Ghz | EP45-DS3 | HD4850 512MB | 4GB DDR2 800 | 640 + 250 GB HDD
SyncMaster 2233BW 22" | Logitech G5 | Logitech G15 | Windows 7 x64

[z270]

sorry, its a wired controller and there are 64bit drivers from microsoft.
ah if snake doesnt walk then i guess thats the problem XD sorry for the trouble, it just that my friend was telling me hes supposed to be able to walk and hes played the games

[Squall-Leonhart]

sorry, i didn't explain it like i should have.

The microsoft drivers, are the biggest epitomy of **** that have ever existed, when it comes to legacy gaming. They break direct input, a standard created by microsoft themselves, which also happens to STILL be a better api then Xinput.

The microsoft drivers, therefore, have problems with a range of Dinput only apps and games, including various emulators, which is where the Xbcd project comes in to replace the msft driversm and provide full dinput compatibility, where msft has been too lazy to implement it.

this comes at the cost of Xinput not working, but coded right these games work with direct input anyway.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[z270]

ah ok, thanks for the info squall
so i uninstalled the old drivers, ran that tool and put vista into test mode and installed the xbcd drivers. now i gotta just find the drivers and get them signed using the program?

[Squall-Leonhart]

if you are using 0.2.6, then they are already test signed using a certificate i generated.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[z270]

0.2.6 of what? i installed 1.07xbcd and then signed the xbcd driver under sysWOW64/drivers/xbcd.sys

when i run the setup though the controller doesnt show up under devices

[Squall-Leonhart]

XBCD - XBox Controller Driver Forum -> Latest 0.2.6 Version

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[z270]

okay so i uninstalled the old version, installed that one and installed the driver. still when i open the setup utility and plug in the controller it doesnt show up :/

[Squall-Leonhart]

did you install the driver in device manager?... err nvm, you most likely did.

this seems to be related to SP1 x32 having driver signing as well now, running ngohq's driver signing crack should fix it.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[z270]

i did put vista into test mode, installed the 64bit 0.2.6 and then installed the driver from the option, didnt work. but im gonna try it all again i think i may have screwed up somewhere. gonna uninstall it all and redo test mode

---

Last edited by z270; December 9th, 2008 at 20:01..

[z270]

i cant seem to get this to work :\ could you give me some step by step to get xbcd set up on 64bit vista? i appreciate it if you could

[Squall-Leonhart]

when the software is installed and vista is in test mode, go into device manager, and find the controller, then do a manual update, pointing it to C:\windows\inf

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[z270]

ah nice, i got it to work, though not like that haha, thanks for all the help