pSX problem - cuebin: read sector...

vultures · September 3rd, 2008

So.. I play all my other games on here with pretty much no problem, but when I put in Ehrgeiz and go to quest mode the game messes up. To be clear, I can play it for a while and occasionally when I try to move into the next level/screen anything the screen turns black and nothing will come out of it. I revert back to saves, but it's still unavoidable because it happens randomly again.

I'm running v1.13 and on the DOS screen, it reads:
cuebin: read sector out of range <298224, max=296584>

and it continues to scroll that across the screen with different numbers.. Any reason for this? It's really frustrating when I get far and it messes up.

http://i86.photobucket.com/albums/k8...traits/psx.jpg

Last edited by vultures; September 3rd, 2008 at 17:17..

polson136 · September 19th, 2008

I had that problem with a few of my games. I found that using a combination of 1.7 and 1.13, most games work, so try 1.7. The newer versions apparentlly stop on a wider variety of errors.

he51i · December 24th, 2008

y is the epsxe going slow on my computer

**Hard core Rikki** · December 24th, 2008

No idea why.
You could start by mentioing wich versions you have, which game does that, and which are your hardware specs.
And update your directx, and verify that the graphic drivers are properly installed?

Alternatively, a separate thread could have been created as well (in the correct section, more specifically).

__________________

Quote:

May the fleas of 1000 camels infest the crotches of BIOS swappers! And may their arms be too short to scratch!

**jonc2006** · December 24th, 2008

Quote:

Originally Posted by he51i

y is the epsxe going slow on my computer

post your system specs, but if you want help with epsxe specifically then head over to the epsxe section.

__________________

Antec 900/Antec Truepower Quattro 1000W/eVGA 780i SLI/Windows XP Media SP2 & Windows Vista Ultimate 32-bit SP1/Intel Core 2 Duo E8400@4.0GHz/Dual eVGA e-Geforce GTX280 1GB DDR3 SLI Enabled/Creative SB X-Fi XtremeGamer/Corsiar XMS2 4GB (2x2GB) PC2-6400 DDR2/Dual WD Caviar SE16 500GB 7200RPM HDDs

The Official jonc2006™ Emotion Chart.
Courtesy of PCXL-Fan after he tried to steal my identity on Steam because I am so awesome.
Official jonc2006™ Fan Club
Official jonc2006™ Trophy Collection

fireblaster_lyz · February 7th, 2009

*quote edited out*

Wtf? Even though I can read Chinese, THIS IS COMPLETE CRAP.

__________________
Regards,
fireblaster_lyz

Plugin(s) Configuration:
ePSXe/PSXeven/SSSPSX
Pete's OpenGL GPU v2.7 | Eternal SPU v1.41 | P.E.O.p.S CDR Plugin

Plugin(s) Links:
Pete's Bernert
Lewpy

Configuration Guides:
Troubleshooting FAQ (READ ME FIRST)
Kane

General Configuration Guide (in Japanese)
Click here. (Dumping BIOS, Everything)

"Because i want my computer to stay a computer. I dont want to be just a psx. "

Last edited by Hard core Rikki; February 7th, 2009 at 20:33.. Reason: no need to quote bots

Phil · February 7th, 2009

it's probably a bot

__________________

A Mac is like an escort, you pay a ton and get nothing.
A PC is like a hooker, it's a lot cheaper and gives you what you're after.. and if unlucky some diseases as well, that's why you gotta use protection. -CC

September 3rd, 2008	#1 (permalink)
vultures Registered User Join Date: Sep 2008 Location: NJ Posts: 1	pSX problem - cuebin: read sector... So.. I play all my other games on here with pretty much no problem, but when I put in Ehrgeiz and go to quest mode the game messes up. To be clear, I can play it for a while and occasionally when I try to move into the next level/screen anything the screen turns black and nothing will come out of it. I revert back to saves, but it's still unavoidable because it happens randomly again. I'm running v1.13 and on the DOS screen, it reads: cuebin: read sector out of range <298224, max=296584> and it continues to scroll that across the screen with different numbers.. Any reason for this? It's really frustrating when I get far and it messes up. http://i86.photobucket.com/albums/k8...traits/psx.jpg Last edited by vultures; September 3rd, 2008 at 17:17..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

September 19th, 2008	#2 (permalink)
polson136 Registered User Join Date: Aug 2008 Location: Chicago, IL Posts: 20	I had that problem with a few of my games. I found that using a combination of 1.7 and 1.13, most games work, so try 1.7. The newer versions apparentlly stop on a wider variety of errors.

December 24th, 2008	#3 (permalink)
he51i Registered User Join Date: Dec 2008 Location: usa Posts: 1	y is the epsxe going slow on my computer

February 7th, 2009	#6 (permalink)
fireblaster_lyz A Blast from the Past... Join Date: Aug 2003 Location: Singapore Posts: 1,905	quote edited out Wtf? Even though I can read Chinese, THIS IS COMPLETE CRAP. __________________ Regards, fireblaster_lyz Plugin(s) Configuration: ePSXe/PSXeven/SSSPSX Pete's OpenGL GPU v2.7 \| Eternal SPU v1.41 \| P.E.O.p.S CDR Plugin Plugin(s) Links: Pete's Bernert Lewpy Configuration Guides: Troubleshooting FAQ (READ ME FIRST) Kane General Configuration Guide (in Japanese) Click here. (Dumping BIOS, Everything) "Because i want my computer to stay a computer. I dont want to be just a psx. " Last edited by Hard core Rikki; February 7th, 2009 at 20:33.. Reason: no need to quote bots

February 7th, 2009	#7 (permalink)
Phil Regular User ;) Join Date: Oct 2007 Location: Naples Florida Posts: 9,965	it's probably a bot __________________ A Mac is like an escort, you pay a ton and get nothing. A PC is like a hooker, it's a lot cheaper and gives you what you're after.. and if unlucky some diseases as well, that's why you gotta use protection. -CC