pcsx2 on pc

frao · January 23rd, 2007

When i ran this pcsx2 software on my pc is telling me that it could not load GS plugin. What do i need to do?

_VeNoM_ · January 23rd, 2007

Which graphic card do u have?
Do u have the newest DirectX installed?
Describe your configuration.

StriderVM · January 23rd, 2007

When it says that, probably it means your video card is that outdated that PCSX2 can't load at all.

You're actually on the wrong forum though.

**emwearz** · January 23rd, 2007

If you looked a few posts below you, you would have seen this post.
http://forums.ngemu.com/ps2-plugins/...gin-error.html

In the future try doing a little search.

@StriderVM, well this is the plugin forum and his question is relating to a plugin.

StriderVM · January 24th, 2007

emwearz :

Blah. Sorry. Non sober drunk again..... -_-

Anyway, here are some tips to be able to know whats causing the GS plugin error.....

1)Press the "Start" button then choose "Run" . Inside the little window, type "dxdiag" then press enter

2)Inside the "DirectX Diagnostic Tool" choose "Display" (Its found in the upper parts of the window.)

3)List what's inside the Name, Manufacturer and Chip and type it in your reply in this thread.

Extra Info : If the information is blank (The name, chip, etc.) then probably you do not have the corrent drivers for your video card, anyway, list what you see and post it here.

kool-aid · January 27th, 2007

I am pretty sure of the answer because my computer is old and pretty much just like it was from the factory, but I will post this anyway.
Three questions-
Can this setup work?
If not, can I buy something to add to my CPU to make it work?
Do I need to buy a new CPU to make it work?

Name: Intel(R) 82810E Graphics Controller
Manufacturer: Intel Corporation
Chip Type: Intel(R) 82810
DAC Type: Internal
Approx. Total Memory: 32.0 MB
Current Display Mode: 800 x 600 (24 bit) (85Hz)
Monitor: Gateway EV500B

StriderVM · January 27th, 2007

No you will have problems because of the video card. Numerous people have reported problems using Intel onboard video card. I suggest buying a real PCI-E video card.

fertek · January 30th, 2007

When i ran this pcsx2 software on my pc is telling me that it could not load GS plugin. What do i need to do?

StriderVM · January 30th, 2007

Hmm, bumping other people's thread while asking is not necessarily banned here, however, they aren't nice either.... :P

So, can we know your computer specifications? There a post above that says how you can know your computer specs.

January 23rd, 2007	#1 (permalink)
frao Registered User Join Date: Jan 2007 Location: pensivania Posts: 1	pcsx2 on pc When i ran this pcsx2 software on my pc is telling me that it could not load GS plugin. What do i need to do?

January 23rd, 2007	#2 (permalink)
_VeNoM_ Chrono Trigger Join Date: Mar 2006 Location: Bosnia and Herzegovina Posts: 19	Which graphic card do u have? Do u have the newest DirectX installed? Describe your configuration. __________________

January 23rd, 2007	#3 (permalink)
StriderVM Registered User Join Date: Nov 2006 Location: Philippines Posts: 1,678	When it says that, probably it means your video card is that outdated that PCSX2 can't load at all. You're actually on the wrong forum though. __________________ Current PC specs : Emaxx EMX-MCP61P-AVL (RIP : MSI K9VGM-V 07/26/2008 ) AMD Athlon64 X2 5600 OCed @ 3206Mhz (229x14) (1.43v) GeCube Radeon 3850 256MB gDDR3 OCed @ 735/1000 2x1024MB DDR2 667Mhz RAM (One PQI one Kingston.... O_o)

January 23rd, 2007	#4 (permalink)
emwearz Moderator Join Date: Feb 2006 Location: Melbourne, Australia Posts: 3,257	If you looked a few posts below you, you would have seen this post. http://forums.ngemu.com/ps2-plugins/...gin-error.html In the future try doing a little search. @StriderVM, well this is the plugin forum and his question is relating to a plugin. __________________ - No Jobs On A Dead Planet - Welcome to EMerica .:\|:. You're mine now » Intel Core 2 Duo E6300 B2 Stepping @3.3 Ghz \| Asus 8800GT 512MB PhysX enabled @700/1750/975 MHz \| 2GB OCZ DDR2 800 « » Asus P5B Vanilla \| Thermaltake Soprano \| Thermaltake Big Typhoon VX « » Beta Tester for nullDC «

January 24th, 2007	#5 (permalink)
StriderVM Registered User Join Date: Nov 2006 Location: Philippines Posts: 1,678	emwearz : Blah. Sorry. Non sober drunk again..... -_- Anyway, here are some tips to be able to know whats causing the GS plugin error..... 1)Press the "Start" button then choose "Run" . Inside the little window, type "dxdiag" then press enter 2)Inside the "DirectX Diagnostic Tool" choose "Display" (Its found in the upper parts of the window.) 3)List what's inside the Name, Manufacturer and Chip and type it in your reply in this thread. Extra Info : If the information is blank (The name, chip, etc.) then probably you do not have the corrent drivers for your video card, anyway, list what you see and post it here. __________________ Current PC specs : Emaxx EMX-MCP61P-AVL (RIP : MSI K9VGM-V 07/26/2008 ) AMD Athlon64 X2 5600 OCed @ 3206Mhz (229x14) (1.43v) GeCube Radeon 3850 256MB gDDR3 OCed @ 735/1000 2x1024MB DDR2 667Mhz RAM (One PQI one Kingston.... O_o)

January 27th, 2007	#6 (permalink)
kool-aid Registered User Join Date: Jan 2007 Location: USA Posts: 1	New CPU? I am pretty sure of the answer because my computer is old and pretty much just like it was from the factory, but I will post this anyway. Three questions- Can this setup work? If not, can I buy something to add to my CPU to make it work? Do I need to buy a new CPU to make it work? Name: Intel(R) 82810E Graphics Controller Manufacturer: Intel Corporation Chip Type: Intel(R) 82810 DAC Type: Internal Approx. Total Memory: 32.0 MB Current Display Mode: 800 x 600 (24 bit) (85Hz) Monitor: Gateway EV500B

January 27th, 2007	#7 (permalink)
StriderVM Registered User Join Date: Nov 2006 Location: Philippines Posts: 1,678	No you will have problems because of the video card. Numerous people have reported problems using Intel onboard video card. I suggest buying a real PCI-E video card. __________________ Current PC specs : Emaxx EMX-MCP61P-AVL (RIP : MSI K9VGM-V 07/26/2008 ) AMD Athlon64 X2 5600 OCed @ 3206Mhz (229x14) (1.43v) GeCube Radeon 3850 256MB gDDR3 OCed @ 735/1000 2x1024MB DDR2 667Mhz RAM (One PQI one Kingston.... O_o)

January 30th, 2007	#8 (permalink)
fertek Registered User Join Date: Jan 2007 Location: Egypt Posts: 1	When i ran this pcsx2 software on my pc is telling me that it could not load GS plugin. What do i need to do?

January 30th, 2007	#9 (permalink)
StriderVM Registered User Join Date: Nov 2006 Location: Philippines Posts: 1,678	Hmm, bumping other people's thread while asking is not necessarily banned here, however, they aren't nice either.... :P So, can we know your computer specifications? There a post above that says how you can know your computer specs. __________________ Current PC specs : Emaxx EMX-MCP61P-AVL (RIP : MSI K9VGM-V 07/26/2008 ) AMD Athlon64 X2 5600 OCed @ 3206Mhz (229x14) (1.43v) GeCube Radeon 3850 256MB gDDR3 OCed @ 735/1000 2x1024MB DDR2 667Mhz RAM (One PQI one Kingston.... O_o)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode