Issue with dual-joystick controller.

H2holbro22 · June 23rd, 2009

I have been using an old GamePad Pro for a while now, which has no joystick. As it has become a real pain, I've decided to buy a new controller.

It's a very generic USB controller (looks exactly like a PS2 controller) which has 2 joysticks. Now, it works just fine for the most part and the computer recognizes it just fine. the only problem is that I can't get the controls right for P64. Here's a pic if it helps.

Now when I go to set my controls, P64 recognizes the left analog stick and the control pad as my movement buttons. And it recognizes the 4 main buttons on the right. No problems with those. But for some reason, the right analog stick is being recognized the same as the 4 main buttons. So P64 thinks that moving the Analog left is the same as pressing the left button. And the Analog Right is the right button... and so on. I want the right analog stick to be a separate joystick so I can set the C-buttons to it. I've tried messing with the configuration in control panel and it seems like it should be fine.

I bought this controller so I could basically use it as a GameCube controller. Any help would be appreciated, thanks.

Squall-Leonhart · June 23rd, 2009

enable analogue before configuring the dpad.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

H2holbro22 · June 24th, 2009

Yeah that seems logical, right? Only problem is, the joystick doesn't activate (on the configuration screen) when analog is ENABLED. But when analog is DISABLED, the joystick works just like the buttons. -_-

Squall-Leonhart · June 24th, 2009

thats because you need to activate analogue before starting the application.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

H2holbro22 · June 24th, 2009

I've tried that already. Activating analog makes it unable to assign the right joystick to anything, even when I activate it before opening P64. It should at least be the other way around.

Squall-Leonhart · June 24th, 2009

post a screenshot (alt+prntscrn) of the game controllers properties screen (control panel)

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

H2holbro22 · June 24th, 2009

Here's the Game Controller properties + P64 configuration screen.

Squall-Leonhart · June 24th, 2009

try using the nrage v2 plugin,

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

H2holbro22 · June 24th, 2009

Wow it works great. That plugin is x10 better than the default one. Thanks a lot man, i appreciate the help.

June 23rd, 2009	#1 (permalink)
H2holbro22 Registered User Join Date: Jun 2009 Location: United States/Ohio Posts: 5	Issue with dual-joystick controller. I have been using an old GamePad Pro for a while now, which has no joystick. As it has become a real pain, I've decided to buy a new controller. It's a very generic USB controller (looks exactly like a PS2 controller) which has 2 joysticks. Now, it works just fine for the most part and the computer recognizes it just fine. the only problem is that I can't get the controls right for P64. Here's a pic if it helps. Now when I go to set my controls, P64 recognizes the left analog stick and the control pad as my movement buttons. And it recognizes the 4 main buttons on the right. No problems with those. But for some reason, the right analog stick is being recognized the same as the 4 main buttons. So P64 thinks that moving the Analog left is the same as pressing the left button. And the Analog Right is the right button... and so on. I want the right analog stick to be a separate joystick so I can set the C-buttons to it. I've tried messing with the configuration in control panel and it seems like it should be fine. I bought this controller so I could basically use it as a GameCube controller. Any help would be appreciated, thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

June 23rd, 2009	#2 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,832	enable analogue before configuring the dpad. __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

June 24th, 2009	#3 (permalink)
H2holbro22 Registered User Join Date: Jun 2009 Location: United States/Ohio Posts: 5	Yeah that seems logical, right? Only problem is, the joystick doesn't activate (on the configuration screen) when analog is ENABLED. But when analog is DISABLED, the joystick works just like the buttons. -_-

June 24th, 2009	#4 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,832	thats because you need to activate analogue before starting the application. __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

June 24th, 2009	#5 (permalink)
H2holbro22 Registered User Join Date: Jun 2009 Location: United States/Ohio Posts: 5	I've tried that already. Activating analog makes it unable to assign the right joystick to anything, even when I activate it before opening P64. It should at least be the other way around.

June 24th, 2009	#6 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,832	post a screenshot (alt+prntscrn) of the game controllers properties screen (control panel) __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

June 24th, 2009	#7 (permalink)
H2holbro22 Registered User Join Date: Jun 2009 Location: United States/Ohio Posts: 5	Here's the Game Controller properties + P64 configuration screen.

June 24th, 2009	#8 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,832	try using the nrage v2 plugin, __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

June 24th, 2009	#9 (permalink)
H2holbro22 Registered User Join Date: Jun 2009 Location: United States/Ohio Posts: 5	Wow it works great. That plugin is x10 better than the default one. Thanks a lot man, i appreciate the help.