Problem with Xbox 360 controllers

r1card007 · May 2nd, 2009

Hi, so I got a wireless receiver for xbox 360 peripherals for my laptop, and I connected it and recognized the 2 wireless controllers that I synced it with, the problem is that Project64 doesn't seem to recognize the second, as I configured the player 1 controller with no problem, but when trying to input from the second xbox 360 controller Project64 just ignores it. Any help really appreciated.

Squall-Leonhart · May 2nd, 2009

xinput is not currently supported.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

Vin Kaleu · May 2nd, 2009

Lies

.

There is a plugin which supports not only 4 wireless xbox controllers, but also even the rumble feature.

XInput Plugin (Xbox 360 Rumble + Both Triggers) - EmuTalk.net

Just download that and put the .dll file in the plugins folder. Select the new plugin in the settings. There is no need/possibility for configuration, but the default controls should be just perfect. (might be a problem if you would also like to use something else then the xbox-controllers at the same time)

Squall-Leonhart · May 2nd, 2009

My post still stands. Xinput is not supported by project64.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

imspecial · May 2nd, 2009

nrage works fine for me with 3 xbox 360 controllers and a single n64 controller.

You just need to go under the device tab in the plugin (or wherever the device option is located) and change them to point to your 360 controllers.

I would be more specific, just I am under my linux partition now so I can't provide specifications

Squall-Leonhart · May 2nd, 2009

It doesn't fully work, and the triggers cancel each other out.

hence why weve been trying forever to get xinput in the latest nrage v2.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

sgsavvy · May 2nd, 2009

so when will it be ready then?[IMG]http://**************/img/3322/n09x0302vnsn/clear.gif[/IMG]

Squall-Leonhart · May 2nd, 2009

who knows.

just use Billard's plugin for now.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

r1card007 · May 3rd, 2009

Well I got it working by using choosing one of the other controller plugins right from project64, the latest nrage

May 2nd, 2009	#1 (permalink)
r1card007 Registered User Join Date: Apr 2009 Location: Mexico Posts: 6	Problem with Xbox 360 controllers Hi, so I got a wireless receiver for xbox 360 peripherals for my laptop, and I connected it and recognized the 2 wireless controllers that I synced it with, the problem is that Project64 doesn't seem to recognize the second, as I configured the player 1 controller with no problem, but when trying to input from the second xbox 360 controller Project64 just ignores it. Any help really appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 2nd, 2009	#2 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,439	xinput is not currently supported. __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

May 2nd, 2009	#3 (permalink)
Vin Kaleu Registered User Join Date: Mar 2008 Location: norway Posts: 2	Lies . There is a plugin which supports not only 4 wireless xbox controllers, but also even the rumble feature. XInput Plugin (Xbox 360 Rumble + Both Triggers) - EmuTalk.net Just download that and put the .dll file in the plugins folder. Select the new plugin in the settings. There is no need/possibility for configuration, but the default controls should be just perfect. (might be a problem if you would also like to use something else then the xbox-controllers at the same time)

May 2nd, 2009	#4 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,439	My post still stands. Xinput is not supported by project64. __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

May 2nd, 2009	#5 (permalink)
imspecial Registered User Join Date: Aug 2006 Location: United States Posts: 67	nrage works fine for me with 3 xbox 360 controllers and a single n64 controller. You just need to go under the device tab in the plugin (or wherever the device option is located) and change them to point to your 360 controllers. I would be more specific, just I am under my linux partition now so I can't provide specifications

May 2nd, 2009	#6 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,439	It doesn't fully work, and the triggers cancel each other out. hence why weve been trying forever to get xinput in the latest nrage v2. __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

May 2nd, 2009	#7 (permalink)
sgsavvy Registered User Join Date: Mar 2009 Location: singapore/singapore Posts: 152	so when will it be ready then?[IMG]http://**************/img/3322/n09x0302vnsn/clear.gif[/IMG]

May 2nd, 2009	#8 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,439	who knows. just use Billard's plugin for now. __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

May 3rd, 2009	#9 (permalink)
r1card007 Registered User Join Date: Apr 2009 Location: Mexico Posts: 6	Well I got it working by using choosing one of the other controller plugins right from project64, the latest nrage