Controlling issues so hard to play

Warl0rd · February 10th, 2009

I bought a Logitech dual action gamepad thinking I would be able to play Project64 comfortably and enjoyably.

I was very wrong. Using this controllers analog stick to control The characters is extremely frustrating. I feel like I have no control over Mario when I'm trying to walk or run in small parts of the level or walk on something that requires one direction of movement like walking on a board floating in Mid-air in Mario64.

The stick just makes Mario move all over sometimes and it feels like such a challenge to steady this analog stick and play properly.

I set the thing to 66% also, but it still hasnt helped.

Anyone else experience this? This analog stick blows.

Squall-Leonhart · February 11th, 2009

The dual analogue can be a ***** to get working, but its a great control once it is.

You want to grab the latest Logitech Gaming Software from the wingman team website, and install the drivers.

Then disable the Profiler software from starting up and reboot.

It should be easily setup after that, Also nab Nrage v2.1 from the emutalk plugin section.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

Warl0rd · February 11th, 2009

I tried to use the Nrage plugin but whenever I tried to configure to controls it doesn't work.

Edit:

I got Nrages plugin to work, It feels a bit smoother but still very challenging when I'm walking on something narrow and small.

BTW what will that software update do?

Last edited by Warl0rd; February 11th, 2009 at 02:43..

February 10th, 2009	#1 (permalink)
Warl0rd Registered User Join Date: Feb 2009 Location: USA Posts: 9	Controlling issues so hard to play I bought a Logitech dual action gamepad thinking I would be able to play Project64 comfortably and enjoyably. I was very wrong. Using this controllers analog stick to control The characters is extremely frustrating. I feel like I have no control over Mario when I'm trying to walk or run in small parts of the level or walk on something that requires one direction of movement like walking on a board floating in Mid-air in Mario64. The stick just makes Mario move all over sometimes and it feels like such a challenge to steady this analog stick and play properly. I set the thing to 66% also, but it still hasnt helped. Anyone else experience this? This analog stick blows.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

February 11th, 2009	#2 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,851	The dual analogue can be a *** to get working, but its a great control once it is. You want to grab the latest Logitech Gaming Software from the wingman team website, and install the drivers. Then disable the Profiler software from starting up and reboot. It should be easily setup after that, Also nab Nrage v2.1 from the emutalk plugin section. __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!.** If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

February 11th, 2009	#3 (permalink)
Warl0rd Registered User Join Date: Feb 2009 Location: USA Posts: 9	I tried to use the Nrage plugin but whenever I tried to configure to controls it doesn't work. Edit: I got Nrages plugin to work, It feels a bit smoother but still very challenging when I'm walking on something narrow and small. BTW what will that software update do? Last edited by Warl0rd; February 11th, 2009 at 02:43..