How To Play Online Guide

[refraction]

Here is a simple step by step guide for playing your games online.

First and foremost, 32bit users will need to get WinPcap from HERE

1. Rip your cd/dvd to iso format! (very important) And the Network Access Disc if you have it.
2. Burn the Disc ID Util CD Version to CD or Disc ID Util DVD Version to DVD and run it on your PS2 (using tricks described in the BIOS dumping guides)
3. Insert your game disc and press X, Read off your Disc ID, this is your DNAS code. You might want to read your Network Access Disc Disc ID too, so you can complete the setup.
4. Run WinDIP, select your iso, press the scan file, then verify version.
5. Enter your Disc ID in to the 5 boxes.
6. Hit patch
6.5. Repeat 4-6 with your Network Access Disc.
7. Next you will need run the Network Access Disc, or some means of making your network config, some games might work, but some will just show garbage, so this is the best option. All network adapters and slim PS2's come with one. DHCP doesnt work, so hard code your IP addresses. You can either run this on your PS2 and transfer over your NETCONF files to a PCSX2 memcard, or run it on PCSX2 directly.
8. Run your ISO and have fun playing online

Note: when you configure the dev9 plugin, tick the ethernet mode, switched mode will work if your ethernet card supports promiscuous mode, otherwise you need to use Bridged, which should be more compatable.

Important Note: If you get DNAS errors -880 or -881, copy your bios back over from the dump, deleting anything in your PCSX2 BIOS folder first, then check the file names! The new dumper tends to put the CRC in the filename, so when PCSX2 reads your BIOS it cannot find the NVM file (which you need for your MAC address) so make sure they have exactly the same name and you arent using a blank file made by PCSX2!


Any other methods discovered or explained on the forums, posts will be edited and forums will be given. This is the closest thing to legal you are going to get, any other method will be considered highly illegal, especially if it involves getting your DiscID from somewhere other than your disc.

If you recieve a DNAS error, check this site 2.0 DNAS Error Codes DNAS - Error Code FAQ - dslreports.com

Attached Files

	WinDIP.7z (100.1 KB, 800 views)
	DISCIDUTIL_V3.0_CD.7z (544.0 KB, 507 views)
	DISCIDUTIL_V3.0_DVD.7z (629.9 KB, 472 views)

__________________

http://www.generalemu.net/
Intel Core 2 Quad Q6600 @ 3.4Ghz (425x8), Leadtek GTX 280 1Gb, 1.8Tb HDs, 2Gb Corsair DDR2-800 @ DDR2-1020 5-5-5-18 Dual Channel
Dont PM me for help, use the forums, thats what its for!

---

Last edited by refraction; December 18th, 2007 at 10:02..

[refraction]

Oh well i spose i better open this for questions

Keep it clear, don't ask till you've read this thread and keep it relevant!

__________________

http://www.generalemu.net/
Intel Core 2 Quad Q6600 @ 3.4Ghz (425x8), Leadtek GTX 280 1Gb, 1.8Tb HDs, 2Gb Corsair DDR2-800 @ DDR2-1020 5-5-5-18 Dual Channel
Dont PM me for help, use the forums, thats what its for!

[ashleyreefer]

just wanted to know, will this work with a slim ps2.

[General Plot]

Originally Posted by ashleyreefer

just wanted to know, will this work with a slim ps2.

The BIOS dump from my version 12 and version 15 PS2's work just fine.

__________________

Intel Core i7 920 @ 3.4 Ghz | 6 GB DDR3 RAM in Triple Channel | GeForce GTX 285
2.5 TB Hard Drive Space | Windows 7 Ultimate x64
Official betatester of PCSX2 and Co-owner of General Emulation

[sb2100y]

thnx mate

[master-juan]

To Do when the step-by-step guide to playing monster hunter mode online?

[refraction]

when i get time and i feel like it. stop pushing.

__________________

http://www.generalemu.net/
Intel Core 2 Quad Q6600 @ 3.4Ghz (425x8), Leadtek GTX 280 1Gb, 1.8Tb HDs, 2Gb Corsair DDR2-800 @ DDR2-1020 5-5-5-18 Dual Channel
Dont PM me for help, use the forums, thats what its for!

[master-juan]

ok ok xD

[lukeskyd]

I've this error when selecting gigahertz plugin for ethernet:

Error opening registry key: SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE1
0318}\0000\ComponentIdError opening registry key: SYSTEM\CurrentControlSet\Control\Network\{4D36E972
-E325-11CE-BFC1-08002BE10318}\Descriptions\Connection
Available TAP-WIN32 adapters [name, GUID]:

If i select ethernet pcsx2 crashes.
Can you help me pls?

[refraction]

try updating your ethernet drivers, i had that once.

also do you have WinPcap installed?

__________________

http://www.generalemu.net/
Intel Core 2 Quad Q6600 @ 3.4Ghz (425x8), Leadtek GTX 280 1Gb, 1.8Tb HDs, 2Gb Corsair DDR2-800 @ DDR2-1020 5-5-5-18 Dual Channel
Dont PM me for help, use the forums, thats what its for!

[master-juan]

you need install win cap xD

[siulmagic]

also when you make the NDS iso you have to patch it with a valid dnas ID use the disc utility and scan it in your ps2 then write it down and patch the iso with windip, or else if you dont patch it ti will give you a dnas validation error

__________________
Brisbane AMD X2 BE-2400 2.3@OC2.9,2gb DDR2 Dual Channel 800,ZOTAC 8800GTS 320mb stock

[refraction]

Originally Posted by siulmagic

also when you make the NDS iso you have to patch it with a valid dnas ID use the disc utility and scan it in your ps2 then write it down and patch the iso with windip, or else if you dont patch it ti will give you a dnas validation error

Good point! i best add that to the first post

__________________

http://www.generalemu.net/
Intel Core 2 Quad Q6600 @ 3.4Ghz (425x8), Leadtek GTX 280 1Gb, 1.8Tb HDs, 2Gb Corsair DDR2-800 @ DDR2-1020 5-5-5-18 Dual Channel
Dont PM me for help, use the forums, thats what its for!

[master-juan]

Refraction, Why build in the confirmation of DNAS not send me wrong, I put DNAS that appears in the Disc Utility in the DVD monster hunter?

Perdon by double-post but when I set the internet connection with the Disk Network of ps2 Do I have to put the IP DNS my pc and also to enable it to connect?

---

Last edited by master-juan; November 22nd, 2007 at 13:53.. Reason: Automerged Doublepost

[refraction]

Originally Posted by master-juan

Refraction, Why build in the confirmation of DNAS not send me wrong, I put DNAS that appears in the Disc Utility in the DVD monster hunter?

Perdon by double-post but when I set the internet connection with the Disk Network of ps2 Do I have to put the IP DNS my pc and also to enable it to connect?

wow engrish, okay ill try and understand what you mean.

the first part i dont get what you mean, the second part, you want to make sure your DNS servers are set to the same as your pc has for the ethernet/wireless connection. If you dont know it you can find out your ISP's DNS servers and use them.

__________________

http://www.generalemu.net/
Intel Core 2 Quad Q6600 @ 3.4Ghz (425x8), Leadtek GTX 280 1Gb, 1.8Tb HDs, 2Gb Corsair DDR2-800 @ DDR2-1020 5-5-5-18 Dual Channel
Dont PM me for help, use the forums, thats what its for!

[woodster]

I followed everything on the guide and tried to connect using an original network config disc and i keep getting error 603 what am i doing wrong?

[siulmagic]

Originally Posted by woodster

I followed everything on the guide and tried to connect using an original network config disc and i keep getting error 603 what am i doing wrong?

you have to make shure you make an iso of the network configuration disc and patch it with a valid dnas

__________________
Brisbane AMD X2 BE-2400 2.3@OC2.9,2gb DDR2 Dual Channel 800,ZOTAC 8800GTS 320mb stock

[CuecaX]

capcom annouced that Monster Hunter and RE Outbreak servers will be closed Dec./31 ... I´m so sad

[Adrian-ex]

this cant be what ? wtf is going on with them this is my baddest nightmare !!no someone must stop them

__________________
The World will never be the same.....
----------------------------------------------

My SYStem:
Intel Core 2 Duo E4300@3.24GHz Freezer Pro
2x OCZ 1GB DDR800 RAM
ATi Radeon X1800 XT 625/1500@700/1801
ASUS P5W DH Deluxe
Soundblaster 24Bit Live!
250GB Maxtor 16MB Cache

[jonemon1]

i cant find the internet plugin in the config screen


Untitled.jpg