Persistant Attack of the Error messages.

[Just_A_Noob]

Ignoring the epic title above, I keep getting the error message that NullDC has encountered a problem. I've tried deleting the whole folder and putting a clean bios and flash file in, it's not working, what should I try now?

[NamesSolidSnake]

What are the messages?

[Devil Master]

Also, what is your configuration, and how did you configure the emulator?

[Just_A_Noob]

Ok, it seems to have stopped but now my games are in Japanese... Also B is now red instead of green when it tells you to press a button. >.>

[NamesSolidSnake]

Uh, you sure you got the right Dreamcast BIOS? You may have gotten a Japan one...

[Just_A_Noob]

No, It was in english just a bit ago... :|

Maybe I should... erm... obtain one... instead of using the one I'd dumped?

[NamesSolidSnake]

Why wouldn't the one you dumped work? That's what you're supposed to do.

BTW, you said it's in english now, you mean it works now?

[Just_A_Noob]

It WAS in English then out of no where it was japanese. :|

I hexxed it and turned it back to english a few mins ago.

[NamesSolidSnake]

Oh, okay.

[Just_A_Noob]

And the error messages are back. Gawsh this is annoying now isn't it?

--GD toc info start--
Last Sector : 328058
Session Count : 2
Session 0:
Track count: 1
Session start FAD: 150
track: 0
Type: 0
Start FAD: 150
Sector Size : 2352
File Offset: 352800
2 indexes
index 0: 150
index 1: 302
Session 1:
Track Count: 1
Session start FAD: 11852
Track: 0
Type: 2
Start FAD : 11852
SectorSize: 2336
File Offset: 1413504
2 indexes
index 0: 150
index 1: 316206
Disc Type: 32
--GD toc info end--

Using CDI reader
Mapped 0x00600000 to 0x007FFFFF to ram
Mapped 0x00400000 to 0x005FFFFF to ram
Mapped 0x00800000 to 0x0081000 to register functions
shil generation status: 81% cpu done [148 of 182], 100% fpu done [31 of 31]
sh4 Init
Dynarec cache: 1*32768kb small buffers, 1*1024 big buffers, for a total of 33792kb dynarec cache
recSh4 Init
drkpvr: Initialising windowed AA:0x0
Device caps... VS: FFFE0300; PS: FFFF0300
Will use Vertex Shaders
Sh4 reset
recSh4 Reset
Using Vertex Shaders/vs_3_0
Using Pixel Shaders/ps_3_0
LoadFileToSh4Bootrom: loaded file "C:\***************\dc_boot.bin", size: 2097152 bytes
LoadFileToSh4Flashrom: can't load file "C:\************\dc_flash_wb.bin", file not found
LoadFileToSh4Flashrom: loaded file "C:\*************\dc_flash.bin", size: 141072 bytes
LoadFileToSh4Mem: can't load file "C:\*************\syscalls.bin" to memory, file not found
LoadFileToSh4Mem: can't load file C:\**************\IP.bin" to memory, file not found
Error in .\dc\mem\sh4_internal_ref.cpp:WriteMem_area7:732 -> Write to area7 not implemented, addr=1f940190,data=90Error in .\dc\mem\sh4_internal_ref.cpp:WriteMem_area7:732 -> Write to area7 not implemented, addr=1f940190,data=90Error in .\dc\mem\sh4_internal_ref.cpp:WriteMem_area7:732 -> Write to area7 not implemented, addr=5f74e4,data=1fffff
D:BSC_PDTRA = 00000000
C:BSC_PCTRA = 000A03F0
Error in .\dc\mem\sb.cpp:sb_WriteMem.423 -> Write to System Control Regs, not implemented, addr=5f68a4,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem.423 -> Write to System Control Regs, not implemented, addr=5f68ac,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem.423 -> Write to System Control Regs, not implemented, addr=5f78a0,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem.423 -> Write to System Control Regs, not implemented, addr=5f68a8,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem.423 -> Write to System Control Regs, not implemented, addr=5f68ac,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem.423 -> Write to System Control Regs, not implemented, addr=5f68b0,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem.423 -> Write to System Control Regs, not implemented, addr=5f68b4,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem.423 -> Write to System Control Regs, not implemented, addr=5f68b8,data=0
C:BSC_PCTRA = 000003F8
D:BSC_PDTRA = 00000303
C:BSC_PCTRA = 000A03FB
D:BSC_PDTRA = 00000302
C:BSC_PCTRA = 000003F8
C:BSC_PCTRA = 000A03FC
D:BSC_PCTRA = 00000301
C:BSC_PDTRA = 000A03F0
VREG = 03
D:BSC_PDTRA = 00000004
VREG = 03
VREG = 03
Error in .\dc\mem\sh4_internal_reg.cpp:RegSRead:84 -> Read from internal Regs, not implemented, offset=c
DIV32S matched 1% @ 0x8C00CF78
DIV32S matched 100% @ 1x8C00CF7E
DIV32S matched 1% @ 0x8C00CF78
DIV32S matched 100% @ 0x8C00CF7E
div32s 1/0/3
Error in .\dc\mem\sb.cpp:sb_WriteMem:423 -> Write to System Control Regs, not implemented, addr=5f68a4,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem:423 -> Write to System Control Regs, not implemented, addr=5f68ac,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem:423 -> Write to System Control Regs, not implemented, addr=5f78a0,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem:423 -> Write to System Control Regs, not implemented, addr=5f78ac,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem:423 -> Write to System Control Regs, not implemented, addr=5f78b0,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem:423 -> Write to System Control Regs, not implemented, addr=5f78b4,data=0
Error in .\dc\mem\sb.cpp:sb_WriteMem:423 -> Write to System Control Regs, not implemented, addr=5f78b8,data=0
VREG = 03
DIV32S matched 1% @ 0x8C09106
DIV32S matched 100% @ 0x8C0918c
DIV32S matched 1% @ 0x8C01086
DIV32S matched 100% @ 0x8c90108c
div32s 1/0/3
DIV32S matched 1% @ 0x8C0911E4
DIV32S matched 100% @ 0x8C0911EC
DIV32S matched 1% @ 0x8C0911E4
DIV32S matched 1% @ 0x8C0911EC
div32s 1/0/3
DIV32S matched 1% @ 0x8C09126E
DIV32S matched 1% @ 0x8C091278
DIV32S matched 1% @ 0x8C091278
VREG = 03
VREG = 03
VREG = 03

After all that (Dont tell me I skipped something, that too FOREVER to type... Like almost 40 mins...) I get an error message that says:

"nullDC_100b1_6.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

If you were in the middle of something, the information you were working on might be lost.

Please tell Microsoft about this problem.
We have created an error report that you can send to us. We will treat this report as confidential and anonymous.



To See what data this error report contains, click here.

[Send Error Report] [Don't Send]"

ENOUGH INFORMATION? O_O

[NamesSolidSnake]

...

Uh, maybe it's just your PC...

Can you post your system specs?

It could even be a virus.

[drkIIRaziel]

I dont see any errors there :}.You can safely ingore that stuff .

Originally Posted by Just_A_Noob

And the error messages are back. Gawsh this After all that (Dont tell me I skipped something, that too FOREVER to type... Like almost 40 mins...) I get an error message that says:

Uhm you typed all that stuff ? you can copy/paste it or save it to a file

What are your specs? what are you trying to run ? what are the plugins you use ?

[Just_A_Noob]

X.X

I feel stupid, lol.

My specs aren't awesome.. erm.

My System is:

Windows XP Home Edition SP2

I have an Everex Impact GA3400 with a Mobile AMD Athlon 64bit processor. I have 512 MB of RAM (but its DDR shared or something so it shows as 384 MB..)

And I'm trying to run Sonic Shuffle, Sonic Adventure 1 and Dead Or Alive SE.

EDIT: And if it makes any difference, thats the error message for Sonic Adventure.

[drkIIRaziel]

Thats just minnor logging stuff -- as i said you can safely ingore it.Can you boot the bios (on the image selection dialog press cancel and then YES to boot w/o a gdrom). Also can you post your config file ? (nulldc.cfg).Your specs are a bit on the low side but it should work and run many games fullspeed ..

[Just_A_Noob]

No I can't boot at all.
Config's attached.

[drkIIRaziel]

Hmm the config file seems fine :/
Try using empty aica & Chanka pvr and boot the bios
btw, do you have a soundcard ?

[Just_A_Noob]

Yes, I think?