Pokemon D/P Issue

[emu_fan]

yes i have these:
1) BIOS
2) Firmware
3) Pokemon Pearl
4) NO$GBA v2.3d
5) eNDryptS Advanced


yes i started eNDryptS Advanced and clicked 1 and then it "patched" the Pokemon Pearl ROM but when i played it i saw 3 lines of messages in Japanese,
how do i fix this. help appreciated.


Tori.

[mehiffa]

Some games wont start unless you have the correct 'nds backup media' type selected. Either search for it on the forums as im sure there has been a post relating to this before, or try cycling through each option and resetting the game to see if it advances.

[TosheX]

yep - same question as in one of the most recent topic posts... not that i personaly mind, but some people do - please review most topics before posting answerd questions

[emu_fan]

huh i've looked around. i've seen the other D/P issue Posts in this forum before i posted here. but i might have overtaken one of them. im sorry, but thank you. But what type of "NDS Backup media" i've looked at one post that said to multiply by 8 by its card size but it doesnt make any sense.

[TosheX]

use FLASH 256 or 512; both work i think but remember game speed is verry slow for now...

[thebull]

Originally Posted by emu_fan

yes i have these:
1) BIOS
2) Firmware
3) Pokemon Pearl
4) NO$GBA v2.3d
5) eNDryptS Advanced


yes i started eNDryptS Advanced and clicked 1 and then it "patched" the Pokemon Pearl ROM but when i played it i saw 3 lines of messages in Japanese,
how do i fix this. help appreciated.


Tori.

I have the same problem, I get these 3 lines written in Japanese and i can´t get past them, i´ve tried setting the "NDS cartridge backup media" to everything it can be set to, then i save the options and it doesnt work, after setting new options it doesnt even show the 3 lines anymore, just a white screen.

[TosheX]

thebull u might have a bad rom file; try getting another one...

[thebull]

Originally Posted by TosheX

thebull u might have a bad rom file; try getting another one...

i´ve tried 3 different sets of pearl&diamond and i´ve got the same problem with all of them, as soon as i set the NDS cartridge backup media to something other than "none" and reset the game it shows me a blank white screen.

[Gladiator@]

Originally Posted by thebull

i´ve tried 3 different sets of pearl&diamond and i´ve got the same problem with all of them, as soon as i set the NDS cartridge backup media to something other than "none" and reset the game it shows me a blank white screen.

Do you have the firmware?

[thebull]

Originally Posted by Gladiator@

Do you have the firmware?

YEAH, I have everything:
ROMS, Bios, firmware, endrypts 1.2 and no$gba 2.3d.
They are all in the same folder without any packed .zip files in the folder. I´ve done the encryption and when i shows me the 3 Japanese lines, I can change every setting in the options except the NDS cartridge backup media, when i change that and reset the game it shows me a white screen.

[Gladiator@]

Originally Posted by thebull

YEAH, I have everything:
ROMS, Bios, firmware, endrypts 1.2 and no$gba 2.3d.
They are all in the same folder without any packed .zip files in the folder. I´ve done the encryption and when i shows me the 3 Japanese lines, I can change every setting in the options except the NDS cartridge backup media, when i change that and reset the game it shows me a white screen.

hummmm, that's weird, it's working fine here and with other people too... I don't know what to say....
Is this happening just with Pokemon or with all your games?
Try redownloading No$GBA and dump your firmware again, you don't have nothing to lose.

[thebull]

Originally Posted by Gladiator@

hummmm, that's weird, it's working fine here and with other people too... I don't know what to say....
Is this happening just with Pokemon or with all your games?
Try to redownload No$GBA and dump your firmware again, you don't have nothing to lose.

I don´t think redownloading any of the needed stuff is going to help, cuz i´ve tried it all with different versions of no$gba and 3 sets of version 2.3d...

[SCHUMI-4-EVA]

Do other games work?

Try actually saving you options and then restarting the emulator and then loading the game, that should work.

I really don't know how else to help you.

[thebull]

Originally Posted by SCHUMI-4-EVA

Do other games work?

Try actually saving you options and then restarting the emulator and then loading the game, that should work.

I really don't know how else to help you.

I dunno if other games work, cuz Pokemon D/P is the only game i want to play AND saving the options doesn´t work, still gives me the white screen.

[SCHUMI-4-EVA]

Make sure everything is correctly named...the only time I ever experienced anything like what you are describing was when I forgot to add my firmware to the new folder I had created.

Also the game is Japanese so I don't see how you wanna play it so bad considering you can't understand a thing, stress when the English version comes out, not now.

[thebull]

Originally Posted by SCHUMI-4-EVA

Make sure everything is correctly named...the only time I ever experienced anything like what you are describing was when I forgot to add my firmware to the new folder I had created.

Also the game is Japanese so I don't see how you wanna play it so bad considering you can't understand a thing, stress when the English version comes out, not now.

I´ve got it to work FINALLY, the problem was that the firmware file I had, was named "ds_firmware.bin". I changed it to "firmware.bin" and started the game and when i changed the options and did a reset the game started just fine
BUT YEA, I´m not gonna play the japanese version, mainly because I don´t understand s**t and it runs sooooooo damn slowly. At the start when the professor spoke to me it seemed to me that the game was running ultra fast but when i left my hous it was like LOL how slow. But I wanted to get the game going so that I´d know that when the english version comes out I don´t have to worry whether I can play the game or not.
Thanks everyone !

[vagos08]

Originally Posted by thebull

I´ve got it to work FINALLY, the problem was that the firmware file I had, was named "ds_firmware.bin". I changed it to "firmware.bin" and started the game and when i changed the options and did a reset the game started just fine
BUT YEA, I´m not gonna play the japanese version, mainly because I don´t understand s**t and it runs sooooooo damn slowly. At the start when the professor spoke to me it seemed to me that the game was running ultra fast but when i left my hous it was like LOL how slow. But I wanted to get the game going so that I´d know that when the english version comes out I don´t have to worry whether I can play the game or not.
Thanks everyone !

Firstly i must say hi cause i am a newcomer here!!That thebull says is actually true!POkemon Diamond at my pc had been started normally with endrypts bios and the latest version of no$gba but the dammed stylus thing coudnt work..So i renamed the ds_firmware bin in firmware.bin and it finnaly worked!!!!!But i must say to all pokemon fans who anticipate to play the game and cannot wait and they download no$gba the game i VERYYYYYYYY SLOWWWWWWWWW!!!!!In my opinion it isnt playpable.Now i am downloading more games to see if the are the same.Anyway Thanks Everyone on this site for the no$gba and i hope in the future they can make it a liitle FASTER!

[Gladiator@]

Originally Posted by thebull

I´ve got it to work FINALLY, the problem was that the firmware file I had, was named "ds_firmware.bin". I changed it to "firmware.bin" and started the game and when i changed the options and did a reset the game started just fine
BUT YEA, I´m not gonna play the japanese version, mainly because I don´t understand s**t and it runs sooooooo damn slowly. At the start when the professor spoke to me it seemed to me that the game was running ultra fast but when i left my hous it was like LOL how slow. But I wanted to get the game going so that I´d know that when the english version comes out I don´t have to worry whether I can play the game or not.
Thanks everyone !

Ohh, I knew there was something wrong with your firmware, that was a common firmware problem, the emulator wasn't using your firmware because it's name was wrong.
But it's good to know it's working now.
Good luck =]

[arghblah]

Originally Posted by vagos08

Firstly i must say hi cause i am a newcomer here!!That thebull says is actually true!POkemon Diamond at my pc had been started normally with endrypts bios and the latest version of no$gba but the dammed stylus thing coudnt work..So i renamed the ds_firmware bin in firmware.bin and it finnaly worked!!!!!But i must say to all pokemon fans who anticipate to play the game and cannot wait and they download no$gba the game i VERYYYYYYYY SLOWWWWWWWWW!!!!!In my opinion it isnt playpable.Now i am downloading more games to see if the are the same.Anyway Thanks Everyone on this site for the no$gba and i hope in the future they can make it a liitle FASTER!

It is not fully playable unless you leave it on the whole time, because it will save but it wont open.

[PRprince]

for all the people with mod access, why dont you rename the thread "poke Di/Pe 3 japanese sentences fix"

and delete all the posts up untill the one where the guy renames the firmware file ?



and making the thread a sticky wont hurt either.