Can't get Xebra to work.

[Snaksolid]

Just need someone to tell me how to get the stupid thing to work.
JAPANESE IS NOT MY FRIEND.

[RedLion]

1- This is not a "stupid thing".You could respect the programmer work please.

2- You can make xebra run following this.

3- If you don't have patience and you are not happy with xebra emulator you can try pSX.

[Snaksolid]

1. already have pSX and ePSXe.both work fine (even though pSX is better offline,i love ePSXe for playing fighters online)

2. already tried what was in that post and it didnt work.any other suggestions?

[SimoneT]

1.) Unpack the emulator to some folder.
2.) Copy the PSX bios to that folder (or you can make a new folder called bios )
3.) Start Xebra.
4.) Select "File->Open->OS ROM Image" and select your PSX bios.
5.) Exit. (now you have 3 new files: BU00, BU10 and OSROM).
6.) Restart Xebra.
7.) Now select "File->Open->CD-ROM via SPTI" or "File->Open->CD-ROM Image" (or in other words ISO image).
7a.) If you select "File->Open->CD-ROM via SPTI", select your CD-ROM and select any file on it.
8.) Go to Run and select either Run1, Run2 or Run3 and wait a while, the emulator should start now.

Here the original help:

XEBRA
Version 06/11/04
Copyright (C)Dr.Hell, 2003-2006

XEBRA is an experimental PlayStation emulater.

------------------------------------------------------------------------
FIRST&MUST
------------------------------------------------------------------------

Open a OS ROM(so called BIOS) image file by "File:Open:OS-ROM Image".

"File:Open:OS-ROM Image"

------------------------------------------------------------------------
GENERAL INFORMATION
------------------------------------------------------------------------

"File:Open:CD-ROM via SPTI"

To open a CD-ROM media with SPTI layer
Choose any file on the media.

"File:Open:CD-ROM Image"

To open a general(2352bytes/sector) CD-ROM image file
Setup a TOC by "View:CD-ROM Drive" if necessary.

"File:Open:OS ROM Image"

To load a OS ROM image from a file

"File:Open:Memory Card 1 Image"
"File:Open:Memory Card 2 Image"

To load a memory card image from a file

"File:Open:Running Image"

To load a running image from a file

"File:Save:Memory Card 1 Image"
"File:Save:Memory Card 2 Image"

To save a memory card image to a file

"File:Save:Main Memory Image"

To save a main memory(so called RAM) image to a file

"File:Save:Running Image"(so called "SaveState")

To save a running image to a file

"File:Exit"

To exit or pause if running

"Run:Run1"

To run with an interpreter

"Run:Run2"

To run with a 1-pass compiler

"Run:Run3"

To run with a 2-pass compiler

"Run:Pause"

To pause

"Run:Reset"

To reset

"Run: Increase Rate"
"Run: Decrease Rate"
"Run: Increase Size"
"Run: Decrease Size"

To tune I-cache simulation model

"Run:Flush"

To flush cache forcely

"Run: Open Shell"
"Run: Close Shell"

To open/close a shell

"Run: Start Card"
"Run: Stop Card"

To insert/pull both 2 memory cards

"View:Video Output"

To setup a device:"Video Output"

"Stretch"

To stretch a picture to a client window

"Whole Frame Buffer"

To display a whole frame buffer

"Drawing Cycle (1)"
"Drawing Cycle (2)"
"Display Cycle"

To skip drawing/displaying

DrawingCycle (1)
DrawingCycle (2) + 1 ‰
DisplayCycle ‰

"V-sync cycle[ns]"

To match virtual time and real time
Input how many nano seconds for a virtual V-sync cycle.

"View:Sound Output"

To setup a device:"Sound Output"

"View:CD-ROM Drive"

To setup a device:"CD-ROM Drive"

"Open via ASPI"

To open a CD-ROM media with ASPI layer
Choose a target device from the list.

"Raw TOC"

To edit a hexadecimal image of TOC

"Save via ASPI"

Save a CD-ROM image to a file with ASPI layer


"Save via SPTI"

Save a CD-ROM image to a file with SPTI layer

"View:Controller"

To setup a device:"Controller"

"View:Log Output"

"File"

"Text"

"Message"

"View:Width"

To set width of a client window

"View:Height"

To set height of a client window

------------------------------------------------------------------------
UPDATING
------------------------------------------------------------------------

Fixed a 2-pass compiler.

------------------------------------------------------------------------
Ciao.