!!VGS and Deamon-tools doesn't work!!!

atze · April 29th, 2002

Hello everybody

I have VGS 1.4.1 and I am using Deamon tools to create a virtual cdrom. I create ISO's with CDR WIN 4.0A. When I start VGS it stay's at "Loading CD ROM... etc" (it doesn't hang but it is responding slow) Does any body know what's wrong??

Greetinx
Atze

**Demigod** · April 29th, 2002

Did you load the ISO into the virtual CD-ROM? And if you have a physical CD/DVD-ROM drive then make sure there is nothing in them. VGS will try to read those drives first before the virtual drive and if it finds a disc it'll try to load it (even non-psx CDs).

__________________
CPU: Intel Core 2 Quad Q9450 Mobo: Intel DX48BT2 Memory: 8192 MB PC10600 DDR3 Videocard: PNY Geforce 9800 GX2 Soundcard: On-board SigmaTel High Definition Audio Hard drive: 1 TB Seagate & 1 TB Hitachi Optical drive: LG GGW-H20L (2x BD-R DL) PSU: Nexus 1000 Watt OS: Microsoft Windows 7 Ultimate (64-bit)

fujita · April 30th, 2002

VGS will always read from the first drive, whether it's a CDRom or virtual drive (I think). How about trying to diagnose your system? Did your VGS started properly if you didn't use the virtual drive? Make sure the drive letter are properly adjusted at system config. There is also a chance that your ISO isn't working well. This can happen if you used a not-so-good CDRom when burning it at the first place. I hope that would help.

__________________
Elly taught us that sometimes sacrifices only lead to more suffering.
Aribeth taught us that sometimes the public don't deserve protection.
Jeane taught us how important to respect the privacy of others.

SOR PROJECT : WHERE EVERYTHING IS REAL

atze · April 30th, 2002

Well none of yourz was the problem was the iso himself i don't know if it was because of cdrwin 4.0 or just a bad iso. But it is working all ok now.

Greetinx
Atze

Sadewa · May 15th, 2002

I had the same problem when I try to create ISO file from standard burning CD like CDRwin, Nero, etc. After I make ISO none of them work both VGS and ePSXe, but after I use ISO Buster from http://www.smart-projects.net/isobuster/ and install daemon tools 3, the ISO file work perfectly. Maybe you should try that program.

__________________
^-^ Peace on Earth ^-^

April 29th, 2002	#1 (permalink)
atze rpg freak Join Date: Nov 2001 Posts: 163	!!VGS and Deamon-tools doesn't work!!! Hello everybody I have VGS 1.4.1 and I am using Deamon tools to create a virtual cdrom. I create ISO's with CDR WIN 4.0A. When I start VGS it stay's at "Loading CD ROM... etc" (it doesn't hang but it is responding slow) Does any body know what's wrong?? Greetinx Atze

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

April 29th, 2002	#2 (permalink)
Demigod これはバタスです Join Date: Jun 2001 Location: Toronto, Ontario, Canada Posts: 5,871	Did you load the ISO into the virtual CD-ROM? And if you have a physical CD/DVD-ROM drive then make sure there is nothing in them. VGS will try to read those drives first before the virtual drive and if it finds a disc it'll try to load it (even non-psx CDs). __________________ CPU: Intel Core 2 Quad Q9450 Mobo: Intel DX48BT2 Memory: 8192 MB PC10600 DDR3 Videocard: PNY Geforce 9800 GX2 Soundcard: On-board SigmaTel High Definition Audio Hard drive: 1 TB Seagate & 1 TB Hitachi Optical drive: LG GGW-H20L (2x BD-R DL) PSU: Nexus 1000 Watt OS: Microsoft Windows 7 Ultimate (64-bit)

April 30th, 2002	#3 (permalink)
fujita Tiger of Jiang Dong Join Date: Sep 2001 Location: Inter Galactic & Dimensional Center Posts: 964	VGS will always read from the first drive, whether it's a CDRom or virtual drive (I think). How about trying to diagnose your system? Did your VGS started properly if you didn't use the virtual drive? Make sure the drive letter are properly adjusted at system config. There is also a chance that your ISO isn't working well. This can happen if you used a not-so-good CDRom when burning it at the first place. I hope that would help. __________________ Elly taught us that sometimes sacrifices only lead to more suffering. Aribeth taught us that sometimes the public don't deserve protection. Jeane taught us how important to respect the privacy of others. SOR PROJECT : WHERE EVERYTHING IS REAL

April 30th, 2002	#4 (permalink)
atze rpg freak Join Date: Nov 2001 Posts: 163	Well none of yourz was the problem was the iso himself i don't know if it was because of cdrwin 4.0 or just a bad iso. But it is working all ok now. Greetinx Atze

May 15th, 2002	#5 (permalink)
Sadewa Registered User Join Date: Jan 2002 Location: Indonesia Posts: 8	I had the same problem when I try to create ISO file from standard burning CD like CDRwin, Nero, etc. After I make ISO none of them work both VGS and ePSXe, but after I use ISO Buster from http://www.smart-projects.net/isobuster/ and install daemon tools 3, the ISO file work perfectly. Maybe you should try that program. __________________ ^-^ Peace on Earth ^-^