DsPad plugin !!! - Page 14

**Luigi__** · July 17th, 2008

Bump to prevent this thread from disappearing.
(that would be great if admins could sticky this...)

__________________
If you're wondering where Mario__ is, he is currently saving Peach__ once again.

Anatasia · July 18th, 2008

Thanks for update.
Totally agree with you about sticky this thread.

__________________
Yoroshiku onegaiitashimasu

Cogito ergo sum - Je pense donc je suis - 我思う。ゆえに我在り

Last edited by Anatasia; July 18th, 2008 at 07:08..

**Lino** · July 18th, 2008

Can NHerve add the release date? Please

__________________
iDeaS Emulator

**Luigi__** · July 18th, 2008

Which release date ?

__________________
If you're wondering where Mario__ is, he is currently saving Peach__ once again.

ZeroBoki · July 21st, 2008

I still get the error 84.
I put sdl.dll in the root folder and dspad.dll in the plugin folder.

**Luigi__** · July 21st, 2008

strange.

__________________
If you're wondering where Mario__ is, he is currently saving Peach__ once again.

ZeroBoki · July 21st, 2008

Congratulations on the sticky topic.

I tried using the plugin with the previous version (1025) and it worked.

**Luigi__** · July 21st, 2008

Thanks to the admin that stickied this thread !!! I didn't notice this, thanks you too, ZeroBoki, for telling it to me.

__________________
If you're wondering where Mario__ is, he is currently saving Peach__ once again.

**Luigi__** · August 2nd, 2008

Hi ! I guess it's time to release a new version. It'll be version 1.7.0 and will have the following changes :
1 - Wanted controller selectable through a list, it'll record the joystick name instead of the joystick index
2 - Removal of the "Save config" button, config saved when clicking OK
3 - SDL providing back, I took it off from my zips because I was unsure about the license, but now I'm sure that I can provide SDL in my zips and it'll be provided with new version.
4 - Removal of the "Axis sensibility" option, the threshold value will be half of max value.

And, if iDeaS gets ported over other platforms, you can also freely port DsPad. Most of the code is cross-platform, the Linux GUI uses GTK so it should be portable to MacOS or other systems.

EDIT : the changes I talked about aren't applied, but it'll take little time to apply them, compile DsPad under Win32, reboot, compile DsPad under Linux (yes, I've multi-boot), zip source, both binaries, SDL and upload the zip here.

EDIT2 : Linux SDL doesn't seem to support POVs, they're recognized as axes. I think I'll include a tweak in Linux version to support this.

__________________
If you're wondering where Mario__ is, he is currently saving Peach__ once again.

Last edited by Luigi__; August 2nd, 2008 at 23:23.. Reason: Automerged Doublepost

D1M1TR1 · August 22nd, 2008

Great plugin Nhervé, it's my favourite pad plugin for iDeaS; I'm using it since I started using iDeaS

The only minor problem that I found now, is that the START button doesn't work if I press any direction on the POV (not the analog stick). I saw your sources and all pages of this topic, the bug is probably from iDeaS.

Although I just wanted to post this here, Lino should check some addresses again. One more time, thanks for your plugin

EDIT: okay, I know that it's my problem : when I config my pad (for PC/PS2/PS3, even though I only use it on my PC) under Windows, the START and SELECT buttons turn off when I press the POV

So, nothing's wrong with Dspad or iDeaS. It's just my pad that's causing trouble... By the way, good luck for version 1.7.0

Last edited by D1M1TR1; August 24th, 2008 at 20:05..

**Luigi__** · September 3rd, 2008

Thanks, but infact I'm a little busy.

__________________
If you're wondering where Mario__ is, he is currently saving Peach__ once again.

DB-usb · November 2nd, 2008

error?

Attached Images

Immagine.bmp (75.3 KB, 20 views)

**Luigi__** · November 2nd, 2008

What version of iDeaS are you using ? I got this bug with old versions.

Anyway, I'm busy with other projects, so the update may take time.

__________________
If you're wondering where Mario__ is, he is currently saving Peach__ once again.

satanic666 · November 2nd, 2008

Quote:

Originally Posted by DB-usb

error?

Check your joystick in your port. Make sure joystick keep untill open ideas.

Squall-Leonhart · November 3rd, 2008

Someone sticky this thread.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

DB-usb · November 3rd, 2008

I use the 1.0.2.7 beta version... and the joystick is ready... (c'è qualcuno che parla italiano?)...

**SCHUMI_4EVER** · November 3rd, 2008

Quote:

Originally Posted by Squall-Leonhart

Someone sticky this thread.

It is stickied an has been for a while.

__________________

Intel Core2Quad Q9550 (2.83Ghz stock) | ASUS P5Q | 2x2GB Transcend JetRam DDR2-800 | ASUS ENGTX260\HDTP\896M | Windows Vista Home Premium 64bit SP1

The Champ has retired but may his Legacy live on FOREVER !!!!

No$GBA DS FAQ 2.0

Get it right fools! The glass is HALF-EMPTY, not half-full!!!

!!! WARNING: Emulation requires a brain !!! WARNING: Emulation =/= Piracy !!!

Squall-Leonhart · November 4th, 2008

oh good,, i just read Nherves bump and was figuring wtf.

yeah, it has been stickied for ages, i forgot.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

**Luigi__** · November 5th, 2008

DB-usb : Lino is Italian.

__________________
If you're wondering where Mario__ is, he is currently saving Peach__ once again.

DB-usb · November 6th, 2008

I use this pad...

Attached Images

pad.jpg (9.6 KB, 7 views)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

July 17th, 2008	#261 (permalink)
Luigi__ Formerly NHervé Join Date: Jul 2007 Location: Peach__'s castle Posts: 712	Bump to prevent this thread from disappearing. (that would be great if admins could sticky this...) __________________ If you're wondering where Mario__ is, he is currently saving Peach__ once again.

July 18th, 2008	#262 (permalink)
Anatasia 越南にて Join Date: Jun 2006 Location: Vietnam Posts: 351	Thanks for update. Totally agree with you about sticky this thread. __________________ Yoroshiku onegaiitashimasu Cogito ergo sum - Je pense donc je suis - 我思う。ゆえに我在り Last edited by Anatasia; July 18th, 2008 at 07:08..

July 18th, 2008	#263 (permalink)
Lino Emu author Join Date: May 2007 Location: Italy Posts: 328	Can NHerve add the release date? Please __________________ iDeaS Emulator

July 18th, 2008	#264 (permalink)
Luigi__ Formerly NHervé Join Date: Jul 2007 Location: Peach__'s castle Posts: 712	Which release date ? __________________ If you're wondering where Mario__ is, he is currently saving Peach__ once again.

July 21st, 2008	#265 (permalink)
ZeroBoki Registered User Join Date: Jun 2008 Location: Banja Luka, BiH Posts: 11	I still get the error 84. I put sdl.dll in the root folder and dspad.dll in the plugin folder.

July 21st, 2008	#266 (permalink)
Luigi__ Formerly NHervé Join Date: Jul 2007 Location: Peach__'s castle Posts: 712	strange. __________________ If you're wondering where Mario__ is, he is currently saving Peach__ once again.

July 21st, 2008	#267 (permalink)
ZeroBoki Registered User Join Date: Jun 2008 Location: Banja Luka, BiH Posts: 11	Congratulations on the sticky topic. I tried using the plugin with the previous version (1025) and it worked.

July 21st, 2008	#268 (permalink)
Luigi__ Formerly NHervé Join Date: Jul 2007 Location: Peach__'s castle Posts: 712	Thanks to the admin that stickied this thread !!! I didn't notice this, thanks you too, ZeroBoki, for telling it to me. __________________ If you're wondering where Mario__ is, he is currently saving Peach__ once again.

August 2nd, 2008	#269 (permalink)
Luigi__ Formerly NHervé Join Date: Jul 2007 Location: Peach__'s castle Posts: 712	Hi ! I guess it's time to release a new version. It'll be version 1.7.0 and will have the following changes : 1 - Wanted controller selectable through a list, it'll record the joystick name instead of the joystick index 2 - Removal of the "Save config" button, config saved when clicking OK 3 - SDL providing back, I took it off from my zips because I was unsure about the license, but now I'm sure that I can provide SDL in my zips and it'll be provided with new version. 4 - Removal of the "Axis sensibility" option, the threshold value will be half of max value. And, if iDeaS gets ported over other platforms, you can also freely port DsPad. Most of the code is cross-platform, the Linux GUI uses GTK so it should be portable to MacOS or other systems. EDIT : the changes I talked about aren't applied, but it'll take little time to apply them, compile DsPad under Win32, reboot, compile DsPad under Linux (yes, I've multi-boot), zip source, both binaries, SDL and upload the zip here. EDIT2 : Linux SDL doesn't seem to support POVs, they're recognized as axes. I think I'll include a tweak in Linux version to support this. __________________ If you're wondering where Mario__ is, he is currently saving Peach__ once again. Last edited by Luigi__; August 2nd, 2008 at 23:23.. Reason: Automerged Doublepost

August 22nd, 2008	#270 (permalink)
D1M1TR1 iDeaS Bug Catcher Join Date: Aug 2008 Location: France Posts: 75	Great plugin Nhervé, it's my favourite pad plugin for iDeaS; I'm using it since I started using iDeaS The only minor problem that I found now, is that the START button doesn't work if I press any direction on the POV (not the analog stick). I saw your sources and all pages of this topic, the bug is probably from iDeaS. Although I just wanted to post this here, Lino should check some addresses again. One more time, thanks for your plugin EDIT: okay, I know that it's my problem : when I config my pad (for PC/PS2/PS3, even though I only use it on my PC) under Windows, the START and SELECT buttons turn off when I press the POV So, nothing's wrong with Dspad or iDeaS. It's just my pad that's causing trouble... By the way, good luck for version 1.7.0 Last edited by D1M1TR1; August 24th, 2008 at 20:05..

September 3rd, 2008	#271 (permalink)
Luigi__ Formerly NHervé Join Date: Jul 2007 Location: Peach__'s castle Posts: 712	Thanks, but infact I'm a little busy. __________________ If you're wondering where Mario__ is, he is currently saving Peach__ once again.

November 2nd, 2008	#273 (permalink)
Luigi__ Formerly NHervé Join Date: Jul 2007 Location: Peach__'s castle Posts: 712	What version of iDeaS are you using ? I got this bug with old versions. Anyway, I'm busy with other projects, so the update may take time. __________________ If you're wondering where Mario__ is, he is currently saving Peach__ once again.

November 3rd, 2008	#275 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,819	Someone sticky this thread. __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

November 3rd, 2008	#276 (permalink)
DB-usb Registered User Join Date: Apr 2008 Location: Venezia Posts: 3	I use the 1.0.2.7 beta version... and the joystick is ready... (c'è qualcuno che parla italiano?)...

November 4th, 2008	#278 (permalink)
Squall-Leonhart Behind ur girlfriend :D Join Date: Feb 2006 Location: Sydney, Australia Posts: 18,819	oh good,, i just read Nherves bump and was figuring wtf. yeah, it has been stickied for ages, i forgot. __________________ VBA-M \| Xtemu \| NGOHQ \| Post Impact Productions \| TNHW \| XBCD 0.2.6 \| Satanic666's Emulator Compiles Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct Need Help with ePSXe? This is your first stop!. If you don't post all the required information, you don't get help. Everytime someone posts a romsite, God kills a beautiful woman.

November 5th, 2008	#279 (permalink)
Luigi__ Formerly NHervé Join Date: Jul 2007 Location: Peach__'s castle Posts: 712	DB-usb : Lino is Italian. __________________ If you're wondering where Mario__ is, he is currently saving Peach__ once again.