Helping neweb

Outerhell · September 26th, 2005

Hmm hi, I managed to configure everything till now, but i have 2 simple problems.

1: I can't control the game with the settings I have entered in the control-pad. Non of the buttons work, not even the start.

2: what do these mean? see attachment

**hushypushy** · September 26th, 2005

1. press F5 ingame
2. those are the config settings for pete's plugins. most people need not concern themselves with that. in the plugin config, uncheck "Show FPS display on startup"

Outerhell · September 26th, 2005

well when i press F5, still noting happens. I need to kinda switch on the control pads.

And with this emulator can we play a multyplayer game over the net with a friend that has the same game?

dbhankins · September 26th, 2005

As for net multiplayer, it's my understanding that that feature of ePSXe has never worked properly.

As for your control problems, you're going to have to describe in greater detail what your setup is. Are you trying to use a PC gamepad with ePSXe, or are you trying to operate it from the keyboard?

If you have a gamepad, have you successfully used it with anything else, such as a PC game that supports gamepads? Failing that, have you checked it in the Windows Control Panel to make sure it's working?

Finally, it would probably help if you posted a screenshot of your ePSXe controller configuration page.

Dan

Outerhell · September 27th, 2005

aa ok, I tried out tenku game, and it worked very good, the controls worked good. It seams that with the game armored core, it doesn't work correctly. Any suggestions? Bty i'm using a keyboard!

dbhankins · September 27th, 2005

Multiplayer controls: Armored core on ePSXe thinks it's on a Playstation in link mode, so split-screen multiplayer won't work right.

Singleplayer controls: Since you didn't give details on what you tried and what the results were, I'm going to have to guess at your problem. A search of the PSX emulation forums suggests that Armored Core has problems with ePSXe when you attempt to use the mouse as an analog stick. Is that what you're doing?

Finally, it would probably help if you posted a screenshot of your ePSXe controller configuration page.

Dan

Outerhell · September 27th, 2005

Hmm, well I'm trying to use the mouse too, but the keyboard on this game is not working. I don't know any more deatils to give !

dbhankins · September 27th, 2005

The first problem I see is that you've got F5 configured as both the left and right D-pad buttons. This is probably preventing F5 from doing the digital/analog switch as it's supposed to.

Suggest you make them "A" and "D" instead.

Dan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

September 26th, 2005	#2 (permalink)
hushypushy the only one you've ever SEEN Join Date: May 2003 Location: San Francisco Posts: 21,837	1. press F5 ingame 2. those are the config settings for pete's plugins. most people need not concern themselves with that. in the plugin config, uncheck "Show FPS display on startup"

September 26th, 2005	#3 (permalink)
Outerhell Registered User Join Date: Sep 2005 Location: Malta Posts: 4	well when i press F5, still noting happens. I need to kinda switch on the control pads. And with this emulator can we play a multyplayer game over the net with a friend that has the same game?

September 26th, 2005	#4 (permalink)
dbhankins Registered User Join Date: Aug 2005 Location: Phoenix, Arizona, USA Posts: 654	As for net multiplayer, it's my understanding that that feature of ePSXe has never worked properly. As for your control problems, you're going to have to describe in greater detail what your setup is. Are you trying to use a PC gamepad with ePSXe, or are you trying to operate it from the keyboard? If you have a gamepad, have you successfully used it with anything else, such as a PC game that supports gamepads? Failing that, have you checked it in the Windows Control Panel to make sure it's working? Finally, it would probably help if you posted a screenshot of your ePSXe controller configuration page. Dan

September 27th, 2005	#5 (permalink)
Outerhell Registered User Join Date: Sep 2005 Location: Malta Posts: 4	aa ok, I tried out tenku game, and it worked very good, the controls worked good. It seams that with the game armored core, it doesn't work correctly. Any suggestions? Bty i'm using a keyboard!

September 27th, 2005	#6 (permalink)
dbhankins Registered User Join Date: Aug 2005 Location: Phoenix, Arizona, USA Posts: 654	Multiplayer controls: Armored core on ePSXe thinks it's on a Playstation in link mode, so split-screen multiplayer won't work right. Singleplayer controls: Since you didn't give details on what you tried and what the results were, I'm going to have to guess at your problem. A search of the PSX emulation forums suggests that Armored Core has problems with ePSXe when you attempt to use the mouse as an analog stick. Is that what you're doing? Finally, it would probably help if you posted a screenshot of your ePSXe controller configuration page. Dan