how make iso without cd-rom that can't raw mode?

Rays · May 3rd, 2002

my spec P3-500.cd-rom asus 50x, tnt2 nvidia riva 16 mb,64 ram
i make iso and bin several time using cdrwin goldenhawk and paragon but it can't run in epsxe 1.5.Just black screen.
How i can make iso file with this cd rom (i don't have cd-rw) ?

**Betamax** · May 3rd, 2002

IIRC asus cd drives have problems reading psx disks. You might be unable to successfully create an iso unless you use a different drive. Sorry.

hoyoyo80 · May 3rd, 2002

Have u try blindread?

**501XX** · May 3rd, 2002

DDump...

grahf · May 4th, 2002

Judging from your spec, you technically shouldn't have any problem making ISO's. Perhaps it's a software fault? Why don't you try CD Clone; it supposedly works on every CD drive.

WuZMoT · May 4th, 2002

Listen to hoyoyo80 Bllindread does the job great
can take a while depending on the actual cd but it works

WuZ.

Rays · May 7th, 2002

i done with isobuster and it done good, it can played in my pc but at the end of exit game (i stop play) and exit epsxe why there message error and epsxe closed automaticly? Thanks

**Betamax** · May 7th, 2002

Make sure that you have got both memory card slots setup correctly to avoid that.

Darschashkna · May 8th, 2002

Try using isobuster also.
www.isobuster.com

It's fast, it's small, it works, and it's FREE!!!

Rays · May 11th, 2002

Betamax, what do u mean with "both memory card slots setup correctly"?
i do already placed memcard for two.

**Betamax** · May 11th, 2002

There a bug in 1.5.2 which causes it to crash if you don't have two memory cards specified:

Rays · May 17th, 2002

but, Betamax i use epsxe 1.51 (also i put both memcard).
And a few day ago i spec epsxe graphic in pete's open gl. But then it can't back to windows screen(win 98). Then i used d3d dx6.
It fine until i play with iso,
it work but (when i play i save normally and frequenly) but after 3 hour or more it back to windows screen and shut down epsxe automaticly. And the game doesn't save what i play for that 3 hour.
i already have directX8.
What wrong ???

May 3rd, 2002	#1 (permalink)
Rays Registered User Join Date: Apr 2002 Location: Indonesia Posts: 27	how make iso without cd-rom that can't raw mode? my spec P3-500.cd-rom asus 50x, tnt2 nvidia riva 16 mb,64 ram i make iso and bin several time using cdrwin goldenhawk and paragon but it can't run in epsxe 1.5.Just black screen. How i can make iso file with this cd rom (i don't have cd-rw) ?

May 3rd, 2002	#2 (permalink)
Betamax Resident Movie Critic Join Date: Apr 2001 Location: Belfast, Northern Ireland Posts: 9,480	IIRC asus cd drives have problems reading psx disks. You might be unable to successfully create an iso unless you use a different drive. Sorry. __________________ Superior marketing of an inferior product will always win over inferior marketing of a superior product.

May 3rd, 2002	#3 (permalink)
hoyoyo80 Registered User Join Date: Apr 2001 Location: Darkside Of Xeen Posts: 1,124	Have u try blindread? __________________ Signature filesize too large

May 3rd, 2002	#4 (permalink)
501XX Administrator Join Date: Jun 2001 Location: Japan Posts: 1,317	DDump... __________________ 501XX's Homepage v3.4

May 4th, 2002	#5 (permalink)
grahf Weltall Join Date: Apr 2002 Posts: 458	Judging from your spec, you technically shouldn't have any problem making ISO's. Perhaps it's a software fault? Why don't you try CD Clone; it supposedly works on every CD drive. __________________ SIS motherboard \| WindowsXP pro \| Athlon XP 2200+(1.8 Ghz) IBM 120gb 7200rpm \| 512Mb DDR PC2100 @133mhz \| C-media 3d sound\| Pixelview geforce4ti4200 64mb\| 12x8x32x CDRW \| 300watt power supply

May 4th, 2002	#6 (permalink)
WuZMoT Registered User Join Date: May 2002 Location: Australia Posts: 24	Listen to hoyoyo80 Bllindread does the job great can take a while depending on the actual cd but it works WuZ.

May 7th, 2002	#7 (permalink)
Rays Registered User Join Date: Apr 2002 Location: Indonesia Posts: 27	i done with isobuster and it done good, it can played in my pc but at the end of exit game (i stop play) and exit epsxe why there message error and epsxe closed automaticly? Thanks

May 7th, 2002	#8 (permalink)
Betamax Resident Movie Critic Join Date: Apr 2001 Location: Belfast, Northern Ireland Posts: 9,480	Make sure that you have got both memory card slots setup correctly to avoid that. __________________ Superior marketing of an inferior product will always win over inferior marketing of a superior product.

May 8th, 2002	#9 (permalink)
Darschashkna Registered User Join Date: May 2002 Posts: 17	Try using isobuster also. www.isobuster.com It's fast, it's small, it works, and it's FREE!!!

May 11th, 2002	#10 (permalink)
Rays Registered User Join Date: Apr 2002 Location: Indonesia Posts: 27	Betamax, what do u mean with "both memory card slots setup correctly"? i do already placed memcard for two.

May 17th, 2002	#12 (permalink)
Rays Registered User Join Date: Apr 2002 Location: Indonesia Posts: 27	but, Betamax i use epsxe 1.51 (also i put both memcard). And a few day ago i spec epsxe graphic in pete's open gl. But then it can't back to windows screen(win 98). Then i used d3d dx6. It fine until i play with iso, it work but (when i play i save normally and frequenly) but after 3 hour or more it back to windows screen and shut down epsxe automaticly. And the game doesn't save what i play for that 3 hour. i already have directX8. What wrong ???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode