ePSXe 1.7 bug reports

[netcap19820304]

I don't know if it's a bug or not : I couldn't select Software Plugin in the video config box ,even i dowbload it from pete's home page and unrar it to the plugin page. Is there anybody has the same problem to me ?

[Squall-Leonhart]

yes, we know, its broken, pete has been informed.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[netcap19820304]

Originally Posted by Squall-Leonhart

yes, we know, its broken, pete has been informed.

Thank you very much ! You reply so fast...Errr...whether i use the improper word or not ?
Afterall my english is poor ,Sorry.

[Squall-Leonhart]

ePSXe 1.7.0 released!

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[ShTM]

Originally Posted by Squall-Leonhart

thats what you get for buying a microsoft product, and using the poorly supporting drivers that come with it.

epsxe requires full Dinput support, which the xbox360 control does not provide. (without third party drivers)

Well I hate to say this because it may seem like I'm being confrontational, but this controller has worked fine with previous versions of ePSXe with no mapping issues. To temporarily fix the issue I remapped the X button on the Xbox360 mapped as the L2 trigger. And the actually remapped the Xbox360's lower L trigger mapped to that of the PS X button. Now the Xbox360 X button responds as the PS X button, and the Xbox360 left lower trigger responds as the L2 PS trigger. That seemed to fix part of the issue, I need to play around to see if any other buttons are miss matched in the ePSXe gui. But there could easily be an issue with the mapping or controller configuration to cause this miss mapping.

---

Last edited by ShTM; May 25th, 2008 at 10:28..

[Squall-Leonhart]

the MSFT drivers don't map dinput correctly anyway, so any problems with it are a result of those drivers, and the only reason it worked before was because the input support was lacking in epsxe.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[DarkSamus]

Did you see my post about mouse support Squall?

__________________

WINDOWS 7 ULTIMATE x64

Originally Posted by bobrocks95

The tits latch on to the female's body at the beginning of puberty and then continue to feed off her internal juices until it they grow to their full size. Then they officially take control of the host body.

[Squall-Leonhart]

set controller 1 to mouse instead, i had the same problem with one of my mouse supporting war games and die hard,

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[DarkSamus]

I just checked and Quake 2 only supports the mouse in port 2!!

__________________

WINDOWS 7 ULTIMATE x64

Originally Posted by bobrocks95

The tits latch on to the female's body at the beginning of puberty and then continue to feed off her internal juices until it they grow to their full size. Then they officially take control of the host body.

[Squall-Leonhart]

okay, lol, gimme a minute

Set pad 1 to Digital only.
set pad 2 to mouse/digital

make sure the mouse pointer is in the window, or fullscreen since it might not work with it outside the window.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[DarkSamus]

That didn't work either

Looks like I can't play Quake 2 with ePSXe 1.7
Damn, cause its the only way to play it once you get used to using a controller and mouse!
Looks like ePSXe 1.6 for Quake 2

__________________

WINDOWS 7 ULTIMATE x64

Originally Posted by bobrocks95

The tits latch on to the female's body at the beginning of puberty and then continue to feed off her internal juices until it they grow to their full size. Then they officially take control of the host body.

---

Last edited by DarkSamus; May 25th, 2008 at 12:15..

[jonc2006]

you say the mouse does not work at all? try using the -mouse command switch.

__________________

Antec 900/Antec Truepower Quattro 1000W/eVGA 780i SLI/Windows XP Media SP2 & Windows Vista Ultimate 32-bit SP1/Intel Core 2 Duo E8400@4.0GHz/Dual eVGA e-Geforce GTX280 1GB DDR3 SLI Enabled/Creative SB X-Fi XtremeGamer/Corsiar XMS2 4GB (2x2GB) PC2-6400 DDR2/Dual WD Caviar SE16 500GB 7200RPM HDDs

The Official jonc2006™ Emotion Chart.
Courtesy of PCXL-Fan after he tried to steal my identity on Steam because I am so awesome.
Official jonc2006™ Fan Club
Official jonc2006™ Trophy Collection

[DarkSamus]

It won't work in controller port 2 (The only port Quake 2 allows for)
When i activate the mouse by pressing F5 the view slowly moves up to the sky and no buttons work!

__________________

WINDOWS 7 ULTIMATE x64

Originally Posted by bobrocks95

The tits latch on to the female's body at the beginning of puberty and then continue to feed off her internal juices until it they grow to their full size. Then they officially take control of the host body.

[Squall-Leonhart]

ok, maybe it'll be fixed in 1.7.1?

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[sparktenks]

Not sure if this bug is specific to the plugin or the emulator but if you uses Petes new OGL2 plugin and set the GFX CArd ram to auto you'll get horrible slow down. (I'm using ati radeon hd2600) If you manually set the GFX ram it will work fine with out problems.

[Squall-Leonhart]

its an ati only issue if i remember.

__________________

VBA-M | Xtemu | NGOHQ | Post Impact Productions | TNHW | XBCD 0.2.6 | Satanic666's Emulator Compiles
Don't be a NOOB, READ THE NGEmu/EmuForums Rules of Conduct
Need Help with ePSXe? This is your first stop!.
If you don't post all the required information, you don't get help.
Everytime someone posts a romsite, God kills a beautiful woman.

[TheShadowRunner]

Pete's provided soft plugin is still not selectable if only gpu.dat is present in the plugin folder.
And yes i'm using the version he released hours ago, 1.18b.
On XP SP3. Card is 8500GT.

[Awakened]

The only game I've tested so far that refuses to run is Gundam Battle Assault 2. I've tried various plugins and settings, but it always crashes after the opening FMV with an opcode error (if you wait through the FMV it doesn't even give an error). It worked fine in 1.6.0.

Other than that I'm impressed. Rumble finally works and the new internal sound plugin is great.

Edit: Hmm, I guess I never tried running GBA2 in pSX before. It crashes after the PSX logo with an unhandled exception in that. Maybe my image is bad. Anyone else have this game to test on 1.7.0?

---

Last edited by Awakened; May 25th, 2008 at 17:30..

[Shinrin_Cole]

Originally Posted by legend100

GPU= Pete's Opengl2 2.8
SPU= Eternal 1.41
CDR= VirusCDR (based on mooby 2.8)

Get Alcohol 120% and mount the iso's to it, then use the cd plug in that came with the emulator, it works great.

i tried it with DBZ legends, and now it runs perfectly.

__________________
AMD Athlon 64 x2 4200+ 2.2 GHZ, 4 GB DDR Ram, GeForce 9600 GSO 384MB DDR3, onboard sound lol, c:\ 160 GB , D:\ 120 GB, E:\ 120 GB

I suckered in and i'm now using Vista SP2 lol

RIP ATI Radeon x800 GTO 256MB DDR

[M4M]

So far I have yet to experience any of the issues that you others have come accross except for a slowdown in LoD using Pec plugin (didnt happen in 1.6 epsxe).

I am using petes openGL2, eternal 1.41 spu, peops cdr or moobys iso cdr plugin, and 360 wired controller, and so far no mapping issues either (running win-vista home basic). I am still testing other games (have yet to test rumble support, was going to but the Lod/pec issue came up :S )

UPDATE:

Well, rumble with a 360 wired controller does NOT work (even with updated drivers from MS) nor does ps2 pad scph 10010 using semi-home made adapter and xbcd+ drivers. The adapter was a psxpad 2 xbox adapter that I cracked open to add a usb end on it. windows sees it and rumble in the xbcd+ driver config works fine, just not in the emu.

---

Last edited by M4M; May 25th, 2008 at 20:10.. Reason: update