Need Help getting epsxe to work.

ryan175 · July 24th, 2004

ok i keep getting a message saying "Error loading WNASPI32.DLL"

Here are my system specifications.

Windows XP Porfessional
Pentium 4
2.5 GHZ
512 MB RAM

I dont know what the problem is, can some 1 tell me if they have had this b4 and how to fix it. i run epsxe on my other computers that are even crappier than this one. so i can use all the help i can.

ryan175 · July 24th, 2004

Ok, i browsed the internet and found some help, they told me to download Forceaspi, so i did and i installed it. but now i get a new error saying "Error in init aspi (227)"

=(

Dr. A · August 3rd, 2004

Quote:

Originally Posted by ryan175

Ok, i browsed the internet and found some help, they told me to download Forceaspi, so i did and i installed it. but now i get a new error saying "Error in init aspi (227)"

=(

Have you tried using Saapu's CD plugin?

OddbOd · August 13th, 2004

Switch to the "ePSXe CDR WNT/W2K core 1.5.2" driver as it doesn't require ASPI, its in the config->cdrom options just make sure you set it to the correct CD drive (the default is generally fine).

**hushypushy** · August 13th, 2004

are you sure you installed ForceASPI correctly? you have to open the file "instaspi" and then restart.

you can also try peops CD plugin and configure it for IOCTL commands, not aspi.

**n_w95482** · August 13th, 2004

Also, make sure you extract the entire contents of the archive and then run instaspi.bat. I've found that if you run instaspi without unzipping anything else, it will not install anything.

July 24th, 2004	#1 (permalink)
ryan175 Registered User Join Date: Jul 2004 Location: california Posts: 2	Need Help getting epsxe to work. ok i keep getting a message saying "Error loading WNASPI32.DLL" Here are my system specifications. Windows XP Porfessional Pentium 4 2.5 GHZ 512 MB RAM I dont know what the problem is, can some 1 tell me if they have had this b4 and how to fix it. i run epsxe on my other computers that are even crappier than this one. so i can use all the help i can.

August 13th, 2004	#5 (permalink)
hushypushy the only one you've ever SEEN Join Date: May 2003 Location: San Francisco Posts: 21,837	are you sure you installed ForceASPI correctly? you have to open the file "instaspi" and then restart. you can also try peops CD plugin and configure it for IOCTL commands, not aspi. __________________ Dedicated to mediocrity and repetition since 1994. 2008 "How Not to Post" guide

August 13th, 2004	#6 (permalink)
n_w95482 Administrator Join Date: Apr 2003 Location: California Posts: 4,684	Also, make sure you extract the entire contents of the archive and then run instaspi.bat. I've found that if you run instaspi without unzipping anything else, it will not install anything. __________________ Main PC: DFI LAN Party nF4 SLI-DR Expert w/406-bta BIOS, AMD Opteron 165 (CCBBE 0615 EPMW) @ 3 GHz (334x9), 1.55v w/D-Tek Fuzion WB; 2x1 GB OCZ PC4000 EB Plats @ 250 MHz, 3-3-2-8, 3:4, 2.7v; ATi Radeon X1900XT 512 MB @ 668/855 w/DD Tyee WB, 150 GB WD Raptor, 4x500 GB WD RE2 (RAID 10), SB Audigy 2 ZS, 700w OCZ GameXStream, CM Stacker 810, Windows XP Pro

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

July 24th, 2004	#2 (permalink)
ryan175 Registered User Join Date: Jul 2004 Location: california Posts: 2	Ok, i browsed the internet and found some help, they told me to download Forceaspi, so i did and i installed it. but now i get a new error saying "Error in init aspi (227)" =(

August 13th, 2004	#4 (permalink)
OddbOd Link Peddler Join Date: Mar 2004 Location: AU Posts: 17	Switch to the "ePSXe CDR WNT/W2K core 1.5.2" driver as it doesn't require ASPI, its in the config->cdrom options just make sure you set it to the correct CD drive (the default is generally fine).