need help with kiky-joy and epsxe

Sanhime · March 26th, 2002

I just got kiky-joy adaptor. I install it, no problems. Checked the properties tab, tested the buttons and rumble effects...no problems.

Went to set up epsxe for directx rumble, popped in Tekken3, check the options menu, turned on rumble....no rumble.

Everything seems fine in the when I checked the properties in the game options in the control panel. Yet, rumble does not work on epsxe.

Has anyone gotten rumble to work with kiky-joy on epsxe?

How should I set up the big motor and small motor setting? Or am I setting it up correctly at all?

March 27th, 2002

I have the KIKI-joy cable and here is how I have it set up. Mode-Digital/Analog (it must be set to this in order for rumble to work, rumble will not work w/just digital), Type-Direct X, Big Motor- Constant, and Small Motor-Sine. W/these settings I get good strong rumble in all my games that support it. Hope this helps.
sincerely,
sx/amiga

Sanhime · March 27th, 2002

I tried those settings and it not working. Do you have other game pads ot joysticks connected?

Sanhime · March 27th, 2002

Nevermind...I found the problem.

The controller ID# in the game options properties tab has to be set to 1 for the adaptor.

RUUUUUUUMBLE!!!

Sanhime · March 27th, 2002

Ah ****, even worst, I can't have any other controllers installed or attached. Other epsxe with the kiky will see the adaptor as J2 or J3 or higher.

Sanhime · March 27th, 2002

Damn it, I can't get windows to force the kiky adaptor to be recognized as the "first" joystick whenever I attach other game pads. Any ideas?

eYeRuLe · March 27th, 2002

i had a problem almost similar to yours.... i just plugged in my PSX game pad to the first usb port and my other game pad to the second.. that way windows recognises the psx gamepad as J1

Sanhime · March 27th, 2002

hmmm, my usb keyboard and usb mouse is takes up the two main usb ports. I have four usb port total, the first two are for the keyboard and mouse, so I stuck the adaptor on usb3 of the last two.

**Kane** · March 27th, 2002

Windows always recognises my MS Sidewinder Freestyle pro as the first device, no matter where it is connected. So I never use it.

Sanhime · March 27th, 2002

Oh well, let's just hope in the near future epsxe team will provide rumble support for 2p,3p, and 4p.

damn, I like my sidewinder too. I hate the idea of using psx pads for my neogeo and cps games. :eek:

oh well, guess i gotta start swapping.

March 26th, 2002	#1 (permalink)
Sanhime Banned Join Date: Aug 2001 Location: Sacred Ground, NYC, USA Posts: 873	need help with kiky-joy and epsxe I just got kiky-joy adaptor. I install it, no problems. Checked the properties tab, tested the buttons and rumble effects...no problems. Went to set up epsxe for directx rumble, popped in Tekken3, check the options menu, turned on rumble....no rumble. Everything seems fine in the when I checked the properties in the game options in the control panel. Yet, rumble does not work on epsxe. Has anyone gotten rumble to work with kiky-joy on epsxe? How should I set up the big motor and small motor setting? Or am I setting it up correctly at all?

March 27th, 2002	#9 (permalink)
Kane 邪魔ゎ指せない Join Date: Jan 2002 Location: Gosport, England Posts: 26,255	Windows always recognises my MS Sidewinder Freestyle pro as the first device, no matter where it is connected. So I never use it. __________________ >Site Live< Pop over to my site for help with setting up PSX emulators. Help for the Final Fantasies and other RPGs avalaible Celes: (Desktop) Athlon 64 X2 4200+, 2Gb 400MHz DDR Ram, MSI K8N Platinum, GeForce 8800 GTS 320Mb, 500Gb RAID HDD, Vista Business Erika: (MCPC) Athlon XP 2400+, 1Gb 400MHz DDR Ram, geForce 6800 256Mb, 80Gb Hdd, XP 2005 MCE Kimiko: (Desktop 2) Athlon 64 3000+, 512Mb 400MHz DDR Ram, Asus K8V, geForce 6800 128Mb

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

March 27th, 2002	#2 (permalink)
sxamiga Guest Posts: n/a	I have the KIKI-joy cable and here is how I have it set up. Mode-Digital/Analog (it must be set to this in order for rumble to work, rumble will not work w/just digital), Type-Direct X, Big Motor- Constant, and Small Motor-Sine. W/these settings I get good strong rumble in all my games that support it. Hope this helps. sincerely, sx/amiga

March 27th, 2002	#3 (permalink)
Sanhime Banned Join Date: Aug 2001 Location: Sacred Ground, NYC, USA Posts: 873	I tried those settings and it not working. Do you have other game pads ot joysticks connected?

March 27th, 2002	#4 (permalink)
Sanhime Banned Join Date: Aug 2001 Location: Sacred Ground, NYC, USA Posts: 873	Nevermind...I found the problem. The controller ID# in the game options properties tab has to be set to 1 for the adaptor. RUUUUUUUMBLE!!!

March 27th, 2002	#5 (permalink)
Sanhime Banned Join Date: Aug 2001 Location: Sacred Ground, NYC, USA Posts: 873	Ah ****, even worst, I can't have any other controllers installed or attached. Other epsxe with the kiky will see the adaptor as J2 or J3 or higher.

March 27th, 2002	#6 (permalink)
Sanhime Banned Join Date: Aug 2001 Location: Sacred Ground, NYC, USA Posts: 873	Damn it, I can't get windows to force the kiky adaptor to be recognized as the "first" joystick whenever I attach other game pads. Any ideas?

March 27th, 2002	#7 (permalink)
eYeRuLe Registered User Join Date: Jan 2002 Posts: 60	i had a problem almost similar to yours.... i just plugged in my PSX game pad to the first usb port and my other game pad to the second.. that way windows recognises the psx gamepad as J1

March 27th, 2002	#8 (permalink)
Sanhime Banned Join Date: Aug 2001 Location: Sacred Ground, NYC, USA Posts: 873	hmmm, my usb keyboard and usb mouse is takes up the two main usb ports. I have four usb port total, the first two are for the keyboard and mouse, so I stuck the adaptor on usb3 of the last two.

March 27th, 2002	#10 (permalink)
Sanhime Banned Join Date: Aug 2001 Location: Sacred Ground, NYC, USA Posts: 873	Oh well, let's just hope in the near future epsxe team will provide rumble support for 2p,3p, and 4p. damn, I like my sidewinder too. I hate the idea of using psx pads for my neogeo and cps games. :eek: oh well, guess i gotta start swapping.