No$gba 2.3b released

[RockmanForte]

* gba/snd: snd_on_off 60h-81h non-writeable while disabled with optional warning
* gba/snd: fixed snd_on_off (resets only 60h-81h, not 82h-83h) (thanks ludvig)
* gba/help: described nr52/snd_on_off affected registers (60h-81h reset to zero)
* gba/help: added noise random generator specs (gba psg channel 4, poly counter)
* snap/sav: uses new "save_chunks" function (instead separate snapdat_write's)
* snap/sav: RLU-encoder/decoder supports long-same regions (code 80h dta8 len16)
* snap/sav-loader: re-allows old/smaller 64K sram/liff blocks (pre 128K flash)
* snap/sav-loader: raised gba-max liff/sram_siz for to 128K (for new FLASH type)
* snap/sav-loader: replaced fixed "liff/sram_siz" by variable "memsiz_sram/liff"
* snap/sav-loader: skips unknown blocks by file-entry (rather by expected entry)
* gba/help: new Backup IDs chapter (library ID strings, thanks pocketheaven faq)
* gba/backup: detects 128kbyte FLASH backup (reportedly uses ID "FLASH1M_Vnnn")
* gba/backup: emulates bankswitched 128kbyte FLASH backup memory (not tested)
* gba/add-on: emulates gba solar sensor (currently fixed level) (boktai, momov)
* gba/add-on: emulates gba-cart real time clock (rtc) (boktai, thanks momov)
* gba/multiplay: refixed slave machine bios-loading (missing v2.2 mount_system)
* nds/sound: precalculates sample rate timing (for some/minor emulation speedup)
* nds/backup/help: added description of the new eeprom/flash/fram backup types
* nds/backup: new: None, EEPROM 8K, EEPROM 64K, FLASH 256K, FLASH 512K, FRAM 32K
* nds/3d: uses pixelformat with alpha (if supported, ie. not by generic driver)
* nds/3d: above alpha untested - disabled by default - see setup: 3D Rear Alpha
* nds/3d: added warning on 3D access with powcnt bit2-3 disabled (thanks anders)
* nds/snd: fixed hang-up on uninitialized sound frequency (thanks damian yerrik)
* nds/3d: loads opengl on any opengl-call (not only on swap buffers) (anders)
* cpu/help: added notes on mis-aligned ldrd/strd (cpu memory alignments chapter)
* cpu/detail: emulates mis-aligned ldrd/strd (clips lower 2 bits) (not 3 bits)
* cpu/bugfix: fixed ldrd/strd bugged alignment warning (thanks anders norlander)
* winxp/xboo: nocashio install bugfix: added "system32\" in CreateService param
* winxp: supports Alt+key combinations (VK_LMENU instead of unsupported VK_MENU)
* internal: sorted/re-arranged nds variables (for future nds snapshot support)
* setup: changed color/depth settings: re-applies nds_color_xlat (backlights)
* web/paypal: fixed missing CRLF between "=" / "-----END PKC" (thanks francesco)
* nds/directboot: puts nds7_bios_crc and user_settings_base in RAM (as by BIOS)
* nds/3d: cleanup: unloads opengl library (if loaded) on exit
* nds/3d: uses win31-style upside-down-images (required for nvidia geforce)
* nds/help: new chapter on accessing gba-slot/gba-carts in ds-mode (clks/addr)
* gba/help: new chapter on gba cart real time clock (rtc) (used in boktai)
* gba/help: new chapter on gba cart solar sensor (boktai, thanks momov for cart)
* gba/help: new chapter on gba cart rom-chip 4bit io port (used in boktai)
* gba/help: added backup eeprom chip names 9853 (mario), and 9854 (boktai)
* nds/directboot: stores RomChipID in RAM (as by BIOS) (verified by newer games)
* nds/bugfix: hwreset memclear includes nds7 I/O region (older version didn't)
* gba/help: added note on ZERO-padded titles in cart-header (eg. in boktai)
* gba/help: fixed joybus entrypoint in gba-cart-header summary (E0h instead E4h)

http://nocash.emubase.de/gba.htm

[kismayas69]

rockman where can we download dis release

[Luengo]

You can get the link in the emulation news forum. Here it is, though

no$gba - nocash gameboy advance emulator (http://nocash.emubase.de/gba.htm)

[JKKDARK]

too late :p

[SCHUMI_4EVER]

I just tested it with Advance Wars - Dual Strike, it now displays 95% perfectly, missing menu´s and various other things can now be seen...just somehow the bottom screen is always laggy, If I start a campaign anything happening in the bottom screen is laggy and sounds are slow and it just starts running horribly. It´s a problem which was also in the previous version.
Phoenix Wright still runs the same as before. Whenever I open the court folder to look at evidence or profiles, it becomes horribly laggy in sound as well as animation. Once I close it again though it runs perfectly. No newly visible graphics as far as I can tell, things that were missing before still are.
Yu-Gi-Oh! Nightmare Troubadour still only shows Nintendo and Konami Screens and then stops.

That´s all I had to test.

[RockmanForte]

I just tested it with Advance Wars - Dual Strike, it now displays 95% perfectly, missing menu´s and various other things can now be seen...just somehow the bottom screen is always laggy, If I start a campaign anything happening in the bottom screen is laggy and sounds are slow and it just starts running horribly. It´s a problem which was also in the previous version.
Phoenix Wright still runs the same as before. Whenever I open the court folder to look at evidence or profiles, it becomes horribly laggy in sound as well as animation. Once I close it again though it runs perfectly. No newly visible graphics as far as I can tell, things that were missing before still are.
Yu-Gi-Oh! Nightmare Troubadour still only shows Nintendo and Konami Screens and then stops.

That´s all I had to test.

REMOVE ( I don't want to have problems. )

[SCHUMI_4EVER]

True, I was just pointing out though considering there is new 3D support...well this 3D rear alpha I thought it might just support a few games a bit better, and Advance Wars does indeed look better, but aside from that I see no change at least among my other games.

[RockmanForte]

REMOVE ( I don't want to have problems. )

[antikhaoz]

Hmm, could someone help me to make this emulator run DS roms ?, i'm a user of windows xp and don´t have the privilegies to install the drivers. Do i have other option ?, like finding certain files or something ?

Thanks

[inforce]

Hmm, could someone help me to make this emulator run DS roms ?, i'm a user of windows xp and don´t have the privilegies to install the drivers. Do i have other option ?, like finding certain files or something ?

Thanks

Oh yah thats easy, um pick your mouse up and make sure the mouse sensor bearings are working and open your case up on your tower and put your mouse inside it.. then wait for it to talk.

[antikhaoz]

Oh yah thats easy, um pick your mouse up and make sure the mouse sensor bearings are working and open your case up on your tower and put your mouse inside it.. then wait for it to talk.

Stop flamming, not everbody knows everything about emulation,
If you have no desire whatsoever to help better shut up , thanks.

When i choose the ´upload to gba or nds´ a message explains me that i need to be loged with a SeLoadDriverPrivilege, which obviously i don´t have since it doesn´t works.

[SCHUMI_4EVER]

Well considering comaptibility is not very good at all at the moment it's not really worth the effort.

[inforce]

gosh someone is mad. i was just kidding =D

[RockmanForte]

Super Princess Peach - Playable and a little bit slow and little bit glitches with Allow 3D Rear Alpha!

Megaman Battle Network 5: Double Team (USA) - Playable and everything is fine expect Rockman's body is some still missing and in the map is glitches and flash a little bit. You will need to use Allow 3D Rear Alpha to see the map! It's just starting! :)

Tennis no Ouji-Sama 2005 - Crystal Drive (JAPAN) - Playable, and slow and you need Allow 3D Rear Alpha.

Contact (USA) - Playable but slow and you need to set FLASH 256k.

Bokura no Taiyou - Django and Sabata (J) - Ingame then freezed.

Kirby Squeak Squad (U) - Playable but a little bit slow.

Alots of games are being increase. NEAT!

[SCHUMI_4EVER]

Heh o well looks like I was right. There is increased compatibility partly due to 3D Rear Alpha.

[RockmanForte]

REMOVE ( I don't want to have problems. )

[SCHUMI_4EVER]

??? I was negative ???

All I basically said is, I was right.

You need a new translator (I assume you are using one? English does not seem to be your first language)

[RockmanForte]

Umm... Wrong answer. :)

The english is my first language. I think there is some merit to the grammar-nazi approach; it keeps people from being lazy about grammar. In my opinion, being casual about grammar is fine. Being lazy about it is not. I might be one of them, heh. Really, it doesn't matter to me as long as I know my grammar then that's fine. See ? My real sentence! :D

EDIT: Non-Grammar and Grammar. Why I do this ? Dont ask me why! :)

Now, enough about this. Get back to no$gba discussion, ok ? ;)

[DarknessTear]

Holy ****, if English is your first language you type it worse than the foreigners I know do.

[RockmanForte]

Hey, be nice! What is wrong with my english ?

Excuse me but this is about no$gba thread, ok ? Thank you. I am here in peace, that's all.

[SCHUMI_4EVER]

Sorry it's just your english is very err jumbled...words are thrown in which are not neccessary...sentences seem backward and jumbled.
Also you were not able to understand fully what I said...I assume no one else perceived that as negative?
I know some people on online games and their english is similar to yours but they are actually french and using a translator.

Sorry I don't mean to offend, I am just being honest.

Also yeah this thread is about no$GBA, but what we were talking about is something which arose as part of the thread so if I was moderator I would see no problem with what we are doing as long as we get back to this thread's original purpose somewhere within the next few posts.

[naruto500]

Not to sound like a noob i have tried three roms with this
naruto4
dbz supersonic warriors
the new rockman game O_O forgot the name

None of them worked but they worked with the old version. Do i need some special file or the roms just dont work for this version

[SCHUMI_4EVER]

The memory type was automatic with the previous version. In this version you however have to set the memory type in emulation setup. Experiment on the different options to see which one works (like Flash512Mbit etc.)

[The Unknown One]

Whoa, this is awesome!! I got Pokemon Diamond to run up to the Game Freak screen, but then it phases out on me. Has anybody been able to get farther than that?

[RockmanForte]

Just the title screen then that's it.

[kismayas69]

rockman help me pls dude is this the lastest version or its the old version and how can i play the DS roms like rockman ryuseii eveytime i load it crash all the time pls rockman i need some answers

[isamu]

how does FFIII run?

[SCHUMI_4EVER]

rockman help me pls dude is this the lastest version or its the old version and how can i play the DS roms like rockman ryuseii eveytime i load it crash all the time pls rockman i need some answers

Hmm someone did not read what I said about the memory by the looks of things.
Or they don't have the "other" files (and before you ask what they are, I am not allowed to discuss them)



No clue about FF3...I don't have it.

[sigmax]

I only going to say this '' I love this emulator ''

[gokussj3]

can someone please post the emulation setup screenshot.
i keep getting the error saying : data could not be read turn off the ds and remove and reinsert the ds card.please tell me what to do.

[sigmax]

can someone please post the emulation setup screenshot.
i keep getting the error saying : data could not be read turn off the ds and remove and reinsert the ds card.please tell me what to do.

Use one of the ''NDS Cartridge Backup Media'' and save

http://i66.photobucket.com/albums/h248/megaxvx/loo.jpg


To:Rockmanames make a new treat of no$gba 2.3b Compatibility List.:bow:

[gokussj3]

thanks a lot sigmax :) .now the games are working fine but when i write the snapshot then load it the screen freezes.:(

[RockmanForte]

rockman help me pls dude is this the lastest version or its the old version and how can i play the DS roms like rockman ryuseii eveytime i load it crash all the time pls rockman i need some answers

It is not fully playable because in the 3D cyberworld there are missing sprites.

thanks a lot sigmax :) .now the games are working fine but when i write the snapshot then load it the screen freezes.:(

it didnt emulated ds roms with the snapshot yet. So don't bother this snapshot for now. :)

XXXXXXXXXXXXXXXXXX

TEST:

King Kong - playable but a little bit slow.

Yoshi's Island 2 - playable, save and you need to set it to EEPROM 64k.

Doraemon: Nobita no Kyouryuu DS - playable, save, and a little bit slow.

Tennis no Ouji-Sama 2005 - Crystal Drive (JAPAN) - playable, save and a little bit slow

Megaman Battle Network 5: Double Team (USA) - playable and everything is fine expect Rockman's body is still some missing and in the map is glitches and flash a little bit and you will need Allow 3D Rear Alpha to see the map and Rockman's background better. :)

Super Princess Peach (USA) - playable, save, a little bit
slow and little bit glitches.

Contact (USA) - playable but a little bit slow and you need to set it to
FLASH 256k and save.

Kirby Squeak Squad (U) - playable, a little bit slow and save. You need to set it to EEPROM 64k.

Bomberman Land Touch! (U) - playable, a little bit slow and save. You need to set it to EEPROM 64k and Allow 3D Rear Alpha to see the background.

WOW, this emulator is amazing! O.o

[sigmax]

rockmangames you got to meke a new thread of teasting take this

Version: no$gba 2.3b

Snood 2 On Vacation (E)

Status: Fully playable

Review: nothing wrong


Scurge Hive (E)

Status: Fully playable

Review: nothing wrong


Crazy Frog Racer (E)

Status: Fully playable

Review: nothing wrong


Marvel Nemesis - Rise of the Imperfects (U)

Status: Fully playable

Review: nothing wrong

Incredibles, The - Rise of the Underminer (E)

Status: playable

Review: Some bugs on 3D.

Tootuff - Mission Nadia (E)

Status: playable

Review:Some bugs on 3D.

Battles of Prince of Persia (E)

Status: playable

Review:some bugs on down screen

Nicktoons Unite! (U)

Status: playable

Review:Some bugs on 3D.

Billiard Action (E)

Status: Fully playable

Review: nothing wrong

Dragon Ball Z - Supersonic Warriors 2 (E)

Status: Fully playable

Review:Some bugs on 3D.

Lunar Genesis (E)

Status: Fully playable

Review: nothing wrong

Tetris DS (E)

Status: Fully playable

Review: nothing wrong

Megaman Battle Network 5 - Double Team DS (E)

Status: Fully playable

Review:Some bugs on down screen

Justice League Heroes (E)

Status: Fully playable

Review:Minor bugs on 3D

Ys Strategy (E)

Status: Fully playable

Review: nothing wrong

Fullmetal Alchemist - Dual Sympathy (U)

Status: Fully playable

Review:Some bugs on top screen

My Animal Centre in Africa (E)

Status: Fully playable

Review: nothing wrong


Mage knight-Destiny's soldier(u)

Status: Fully playable

Review: nothing wrong



I LOVE THIS EMU!!

[RockmanForte]

Why don't you make one ? :P

You need to give some of those in fully description like I did. Because I read your games and not sure what is what. Remember, to set it to Allow 3D Rear Alpha for some games that requires it.

[sigmax]

Well, i will make a full description of my test (what kind of ''NDS Cartridge Backup Media'' and ''Allow 3D Rear Alpha'') you got to use for the game works xd.

But i don't like to make new thread:spy:

[babygiant]

when i save i can't find the save file.

[RockmanForte]

Jump Ultimate Stars (J) - Playable when NDS Backup Media is at FRAM 32KBystes and Allow 3D Rear Alpha is enabled.

[t3hs0urtac0]

sigmax you should post whether the games save or not XD just a suggestion

EDIT : does anyone know how to stop Lunar : Dragon song from auto-escaping in battle?

[RockmanForte]

I noticed in World 1-3: Mario's Fleet Feet

Yoshi's Island DS -- In this room, make eggs out of the Shy Guys that spawn endlessly from the pipe, then shoot through the yellow wall to the right. Go through the opening and aim upward to shoot down a ball you can bounce on. Bounce to the upper ledge, then jump to the left platform where you can hit a few M blocks to obtain four stars if you want.

But when I shoot egg through the yellow wall for the ball to fallen down and it won't. Is this bug ? Please test it and let me know so I can report to the no$gba team because I contacted them few time. They are very great people and friendly. Help me so I can report it to them if you have the same problem as mine. :);)

[gokussj3]

thanks a lot rockmangames for the info

[kismayas69]

pls give me the new version of this emulator i want to try it sometimes...thanks or send me in email kismayas_gh@yahoo.com

[SCHUMI_4EVER]

You can get the link in the emulation news forum. Here it is, though

no$gba - nocash gameboy advance emulator (http://nocash.emubase.de/gba.htm)


You could just have looked for it yourself.

Any idiot can find it, it's not hard.

[TheTET]

Digimon Story (J)- Fully playable and Save !

[gokussj3]

can someone check please if we can save in pokemon ranger and tell me how to save because when i save it then load it the game freezes

[RockmanForte]

can someone check please if we can save in pokemon ranger and tell me how to save because when i save it then load it the game freezes

Do you use snapshot right ? Then dont! This emulator have NDS Cartridge Backup Media and it will take care of it. Make sure you set to what card it requires then you are all good. Snapshot doesnt work on nds version yet.

[Xmortal]

Ryusei no Rockman

Status: full playabe whit bug in the sound and grafics in battle

Save Type:Flash 256 KBytes

[RockmanForte]

You will need firmware.bin --- why ?

Q: My game, above ROM 500, gives me a black screen and stucks the emulator, how to proceed?

A: By our very own diablow...

You'll need the firmware.bin. After you copy it to no$gba folder (the same place where bioses reside), select "Reset/Startup Entrypoint" in Emulation Setup, save setup. Restart game, or even better - close and start no$gba again, now after selecting nds file, it will go to nds menu.

[Cloudius]

The save state feature seem to work better now, though not complete.
Great Emu nonetheless.

SVCF DS (J)
Save on FRAM 32KBytes

[RockmanForte]

SVCF DS (J)
Save on FRAM 32KBytes

Really ? Accord to this card statement that it is 64kb EEPROM and I test it with no$gba and it is indeed accept 64kb EEPROM.

[Cloudius]

Well..., I haven't tested it on EEPROM, I just selected FRAM 32KBytes.
I'm a newbie, but what is EEPROM and FRAM?

[RockmanForte]

Well..., I haven't tested it on EEPROM, I just selected FRAM 32KBytes.
I'm a newbie, but what is EEPROM and FRAM?

That's understandable. :):thumb:

You got me so I use the google and here it is:

What is EEPROM? - A Word Definition From the Webopedia Computer Dictionary (http://www.webopedia.com/TERM/E/EEPROM.html)

What is FRAM? - A Word Definition From the Webopedia Computer Dictionary (http://www.webopedia.com/TERM/F/FRAM.html)

:D

[joan]

Hello, i'm newbie, and is my first post, and please need help.

How to save in Pokemon Mystery Dungeon Blue??

Thanks

[RockmanForte]

Set it to FLASH 512kbits. Just in case, set it to Allow 3D Rear Alpha. :D

[SCHUMI_4EVER]

This 3D Rear Alpha is really an awesome improvement. :D

[joan]

Thank you!!!

[RockmanForte]

No problem! Drop me a line if you need anything and I will be very happy to check things out and help you any I can. :)

If you guys cannot figure out which is which. Multiply by 8:

4kb EEPROM ==> Set it to EEPROM 0.5kbytes
64mbits EEPROM ==> Set it to EEPROM 8kbytes
512mbits EEPROM ==> Set it to EEPROM 64kbytes
2Mbit FLASH ==> Set it to FLASH 256kbytes
4mbits FLASH ==> Set it to FLASH 512kbytes
256mbits FRAM ==> Set it to FRAM 32kbytes

Cheers!

[SCHUMI_4EVER]

Hey rockmangames when you say something is fully playable do that mean you experience no slow down on the bottom screen?

Because Phoenix Wright only has a few missing graphics here and there, but otherwise it's fine. Unless you click on court record and look at the evidence...then the bottom screen lags badly. Pretty much the same thing for Advance Wars, the map lags.

So this does not happen in those games you have mentioned?

I doubt it's my PC creating the lag, cuz eventhough it's a year old it was close to the best you could get at that time, and I can run FEAR very decently (100+ fps) so I doubt some emulator will give me lag.

I guess it's bug in the emulator and I will have to wait patiently untill it's fixed.

[RockmanForte]

You are right but the reason I said it is fully playable because there is no freeze or crash at all. I guess we will have to wait patiently until it's fixed. I am sure it can be resolve at version 2.4. Who knows. :)

[SCHUMI_4EVER]

Yeah that would be awesome ! I could then at least play Phoenix Wright.

I wonder who can get 3D emulation done(as in complete, no alpha or beta) first...this or DeSmuME or iDeaS..o well ill just have to wait and see, it would be awesome if they could all get compatibilty up enough to at least make Yu-Gi-Oh! Nightmare Troubadour and maybe even the new Yu-Gi-Oh! GX - Spirit Caller run by July though.

Now before anyone criticises me, I know that I have to be patient and that they are all working hard, but I can hope/wish can't I? I am not demanding they get it done by then...just hoping...the longer it takes the more outdated the cards get so I would like to play it soon but at the same time I understand that it may only be compatible next year sometime or even later.

[gokussj3]

thanks rockmangames so what type of eeprom or flash do i use for saving in pokemon ranger

[chotypsx]

no$gba 2.3b.

yoshi island ds(u) - playable and save.

no$gba 2.b

Star fox Command - not run, blue screen.

new super mario (u) - intro - menu, black screen at start game.

rockman zx - crash after video codec logo.

tales of tempest (j) - intro - menu, black screen at start game.

micro machines v4 (u) - intro - menu, black screen at start game.

[Rod2327]

Guys, i cant touch screen with mouse, whats wrong???:(

[RockmanForte]

thanks rockmangames so what type of eeprom or flash do i use for saving in pokemon ranger

This card is 256 megabits which it is 2Mbit FLASH. So you need to set it to FLASH 256kbytes. :)


I wonder who can get 3D emulation done(as in complete, no alpha or beta) first...this or DeSmuME or iDeaS.

iDeaS was the first emulator that emulated 3D, kinda then no$gba. Desmume is the last one that didnt emulated 3D yet.

Guys, i cant touch screen with mouse, whats wrong???:(

Do you have firmware ? If not, then you need this!

[SCHUMI_4EVER]

That's not entirely true, from the screenshots one can see on shash's blog, he has done quite a bit of 3D work, just it's his own work, not part of the emulator yet and probably will not be anytime soon. But his work is just awesome im pretty sure once it's implemented at least if that will happen sometime this year, then DeSmuME will quickely jump to the front in compatibilty.

[RockmanForte]

No, I mean desmume that emulated 3D from Shash is not out...yet. For now, this desmume we are having is not emulated 3-D at all. iDeaS was the first that released to us that already emulated 3-D partially. :)

[SCHUMI_4EVER]

That's true, but that does not mean that DeSmuME, might not be the first emulator to fully emulate 3D, in other words allow all games to be compatible.

At the moment no$GBA and iDeaS have the lead, but that could change at any time. At the moment they are switching the lead with each new version. iDeaS had it, but now no$GBA has it thanks to this version.

[joan]

FF III: Can view the intro video, but very slow and black screen at start game.

[RockmanForte]

Cooking Mama (U) - playable

Tetris (U) - playable and slow

[joan]

The Urbz Sims in the city: Fully playable and great sound

[RockmanForte]

The Urbz Sims in the city: Fully playable and great sound

Make sure you play it as long as you can to see if it is fully playable because you can't just play it for 2 minutes and said it is fully playable. Try to play it as long as you can to see if it is fully playable, ok ? GOOD JOB! :)

[joan]

Yeah is fully playable, i play a minigame :bow:

[RockmanForte]

Don't play a minigame..try play the full one instead of a minigame. :)

[Rod2327]

Rockman, i have both firmware and bios, and the problem continues...why? In version 2.3a everthing was fine.

[RockmanForte]

Show me your directory with photocopy so I will know if there is anything wrong.

[Rod2327]

There is:

[RockmanForte]

Ahh, see ? It's wrong. Rename it to firmware. Because it must be in .bin so rename it to firmware.bin, ok ? Make sure it is not firmware.bin.bin. It won't work. Make sure it is "firmware.bin". :)

[Rod2327]

Hey, Rockman, thx!:thumb:

[RockmanForte]

Great! :D

EDIT: Let me know anytime you need my help. I will be glad to help you and even anyone. ;)

[SCHUMI_4EVER]

Anything with two extensions will not work, that's a basic file property.

Just change the name to firmware and it should be fine. I think it already has the .bin extension. It looks like your burning program has been associated with .bin files, that's why you can't see the extension in this case.

[RockmanForte]

He already did. That's why he thanked me that it worked.



Lunar Genesis (E)

Status: Fully playable

Review: nothing wrong


Yes it have a bugs. You cannot fight against the enemies because of auto-escaping every time you tried to fight the enemies. So it have a bug. Please play first to make sure it is fully playable or not. For now, it is just Playable.

[Rod2327]

Yeah, thx man!!

[gokussj3]

thanks rockmangames.now when i put flash 256 in the nds catridge backup media then i save the setup and when i reopen no$gba it says No$gba fatal-unexpected error.please help me

[RockmanForte]

thanks rockmangames.now when i put flash 256 in the nds catridge backup media then i save the setup and when i reopen no$gba it says No$gba fatal-unexpected error.please help me

You're welcome. Do not save the set up. It have a problem so wait for the next version. Just put flash 256 in the nds cartridge backup media. There is a trick. Just click ok and click Reset cartridge and it will read your cartridge backup media. If you want to change to other nds file then do the same thing..put any cartrdige backup and click ok and click reset cartridge again and that's simple. Just don't save the set up. It have a problem, that's why. :):thumb:

[gokussj3]

so do i need to do this everytime when i play the game.can i quicksave too.thanks a lot

[bakis]

can enyone tell me how can i play pokemon ranger?
with no$gba 2.3a when you have to clic new game or options it cant clic.
with no$gba 2.3b it say " data couldn't be read.Please turn off the power and remove and reinsert the DS Game Card."
please help:cry:

[SCHUMI_4EVER]

can enyone tell me how can i play pokemon ranger?
with no$gba 2.3a when you have to clic new game or options it cant clic.
with no$gba 2.3b it say " data couldn't be read.Please turn off the power and remove and reinsert the DS Game Card."
please help:cry:

Read the previous posts and the awnser shall be revealed to you. I would help you but considering it's already been covered I don't want to repeat something which should be easy to find.

[gokussj3]

thanks a lot rockmangames.the save is working fine.

[RockmanForte]

Sure, no problem. I am glad that everything is fine with you. CHEERS! :D

[bakis]

in pokemon ranger the characters are showing up transparent. is that normal or i can do something to corect it?

[SolarBoyChris]

Is there a way to link with Ryuusei no Rockman: Dragon to another Ryuusei?

[RockmanForte]

Is there a way to link with Ryuusei no Rockman: Dragon to another Ryuusei?

Do not ask for it. It is against the rules. And this game is not playable because you can't see the enemies in the 3-D world so you will have to wait for the next version or so. :)

in pokemon ranger the characters are showing up transparent. is that normal or i can do something to corect it?

It is normal. Just wait for the next version or so.

[bakis]

thanks rockmangames

[SolarBoyChris]

[QUOTE=rockmangames;1074025]Do not ask for it. It is against the rules. And this game is not playable because you can't see the enemies in the 3-D world so you will have to wait for the next version or so. :)

That wasn´t my question. I meant if there is a way to link on real DS. And is the Crossover Battle remaining with Bokura no Taiyoo?

[RockmanForte]

Oh..there should be but this emulator is still in development so you will have to wait for a few versions to improvement better then there will be. :)

[Mad]

WiFi development is still slow, and there some hardware parts of DS that remains unknown.

[RockmanForte]

Yeah. What some hardware parts of DS that remains unknown ?

[SCHUMI_4EVER]

Well it's not neccessarily unknown...it's just not fully understood...like only 80% which makes emulation very hard especially 3D for instance or WiFi.
If one understands how a system works it's easily to emulate, however if one does not then it's near impossible.
The DS is not fully inderstood yet.

[joan]

you know when publish the next version of the emulator?

Sorry but i used a translator

[JKKDARK]

you know when publish the next version of the emulator?

Sorry but i used a translator

Please don't ask, the author/s are working on it.

[raisingod]

hmm Well since its late in here I am going to post only one result :

Pokemon Perl ( for those who ask why: its one of the blank screen roms before and now its at least running ):

Status: non-working ( get stuck in main screen).

Screen shot:

http://forums.ngemu.com/attachment.php?attachmentid=129561&stc=1&d=1170039148

[Afrothunder22]

rock i see wats wrong i saved my setup so im gonna do everything over again
and see wat happens

[RockmanForte]

just don't set up save ok ? in the next version will be fixed so just dont set up save for now. :)

[Razorman]

@rockmangames

Contact is not fully playable, actualy its playable until the end of the first level(chapter or whatever) when you have to input the destination to navy, then its all black...

[SCHUMI_4EVER]

Yu-Gi-Oh! GX - Spirit Caller (U) :thumb: :D
- FULLY PLAYABLE (sound buggy and pretty much inaudible and it runs slow)
I think it was FLASH512kbytes
3D Rear Alpha is of course enabled.

As far as I can tell that is. I see no missing graphics, and have not yet encountered any crashes or unplayable glitches. I admit though I have not played too much, only got through the intro and then had 1 duel with Syrus all in all about half an hours gameplay (because it runs so slow). I do however know I can save ingame and then load that save by resetting the cartridge. The graphics are a little buggy (which may come from the speed it runs at), but not enough to mess up game play in any way. Aside from speed and sound buggyness, this game works beautifully from what I have seen.

I promptly tried out the older Yu-Gi-Oh! Nightmare Troubadour (U) which I had already tried, but I might have made a mistake so I tried again...but strangely enough this does not work...older game does not work, newer one does...that's a bit strange but o well.

Anyways I think this is just awesome and I wanted to share.:D

[RockmanForte]

Yu-Gi-Oh! GX - Spirit Caller (U) :thumb: :D
- FULLY PLAYABLE (sound buggy and pretty much inaudible and it runs slow)
I think it was FLASH512kbytes
3D Rear Alpha is of course enabled.

Incorrection. It is supposed to be FLASH 2mbits accord to the nds card which means it should be FLASH 256kbytes. :)

Otherwise, thanks for test this game. ^-^;

[SCHUMI_4EVER]

I would give you screenshots but whenever I press the PrintScreen button I either get a really weird image or the emulator crashes.

[RockmanForte]

Don't worry about it because maybe your will work fine but accord to this nds card's size thats all. I am just telling you what I know. I am going to test it and see if printscreen button work okay with this emulator:

Edit:

Printscreen button worked fine ::

http://i15.tinypic.com/47cje9y.jpg
http://i18.tinypic.com/3z6ebt2.jpg
http://i5.tinypic.com/2d7j7nq.jpg

[SCHUMI_4EVER]

Weird I wonder what I was doing wrong.

Unlimited Mhz Disaster and Fast bursts ....don't your ears hurt? it makes the sound even worse than it is and almost gives me a headache if I have it enabled, at least it did on Phoenix Wright.
Gonna try that tomorrow. You have sound problems to though, right?

I just love this game. It's pure gold.

[RockmanForte]

The sound is imperfect. It will someday. :)

[AFK_O_o_BRB]

i got a question pls...when i trun on the yugioh spirit caller rom on all i get is white screen any reason why iam getting this...i have made the settings same as rockman's settings in that pic too but no use...thx in advance

[SCHUMI_4EVER]

Make sure that you have all the correct files you need to run games on no$GBA and also perform those two or three extra steps which are needed to run a game.
I would say more but I am not exactly sure where the line is for breaking a forum rule so I would rather not even get close to it.

[AFK_O_o_BRB]

my bad i fixed it lol...thx alot for replying anyway
this emu rox and so is the game :D

[SCHUMI_4EVER]

You said it =D

This game is awesome but the starting deck sucks =( . I am finding it soooo hard to win duels, I wish I could catch a break sometime. At this rate it's gonne be a while before I get anywhere.

[Cloudius]

Incorrection. It is supposed to be FLASH 2mbits accord to the nds card which means it should be FLASH 256kbytes. :)

Otherwise, thanks for test this game. ^-^;
Where exactly do look to see correct Backup Media is suppose to be?

[RockmanForte]

I got the information some from games site. :)

Edit: Only the game size but for backup media then you will have to do the math to match. :)

[AFK_O_o_BRB]

i have the rom yugioh spirit caller (US) but the inside game text are in jap..is that normal or somthing worng with the emu settings or somthing...thx in advance.

[Gladiator@]

i have the rom yugioh spirit caller (US) but the inside game text are in jap..is that normal or somthing worng with the emu settings or somthing...thx in advance.

This isn't a emu problem, this is a game configuration "problem".
Go to options and you'll find out how to change the language, you can change to English/Japanese in both, U or J roms.

[AFK_O_o_BRB]

sorry if u can post a ss of how to change the language ,cuz its all in jap and i cant find any options inside the game...or u mean the emu option?

[RockmanForte]

Ok, nobody helped you I guess.

Here it is:

1. Do you have firmware.bin ? Change it to GBABIOS. It will read NDS firmware.bin anyway. Take a look at this:

http://i18.tinypic.com/2q1a22s.jpg

Click Ok then click Options>Save Options>File>Reset Cartridge

Now, click small logo of nds on the bottom of the screen. Here is the screenshot:

http://i7.tinypic.com/453fl74.jpg

Now, click something that look like a tool then the icon that look like a world and click it and click ENGLISH and click A Confirm -- screenshot here:

http://i19.tinypic.com/33cyts3.jpg
http://i7.tinypic.com/33fgbbk.jpg

Now, there is a trick. Use your mouse and click right button and click RESET. No, you cannot save this setting because you will have to do it every time. Mine is english firmware only. I assume that your firmware is in japan. So you can change it to any languages. ENJOY!

[AFK_O_o_BRB]

Working Fine Thx Alot man :)

[RockmanForte]

No problem. I will be here anytime you guys need my help. ;) ENJOY!!!!!

[dooz]

0820 - Phoenix Wright Ace Attorney - Justice For All (U)(XPA)

Status: Fully playable and save (EEPROM 64k).

Review: Displays almost all graphics perfectly, with very few glitches when switching sprites. The only two issues I can find is speed (it normally runs at 80%-90%) and the bottom screen does not display pictures when you check them in your evidence menu. Still fully playable, though, as I'm now at the last court case in the game.

However, a certain unfortunate problem I had just after writing this paragraph was when I tried to take a screenshot, no$gba crashed and apperantly my last save didn't really save. It just saved at the last court case I completed. Still, though, that's the only time I've had a problem.

[RockmanForte]

Really? As in the last page 6 I mentioned about the no$gba doesnt crashed while take a screenshot. I don't know what's the wrong with yours.

[dooz]

I have no idea. I have version 2.3b. Maybe an issue specifically with my computer? Regardless, I don't mind so much; I wouldn't be making that many screenshots anyways. It just sucks that I have to start an entire case over again (That particular one lasted maybe 3 hours).

[SCHUMI_4EVER]

Is this in the first or second Phoenix Wright game?

The first one gives me horrible lag on the court folder when I try to look at evidence. Dont't you get that? or are you playing the second one where that no longer happens?

[dooz]

This is the second game, and the game does lag a bit when looking at evidence (It gets speeds of around 50%-70%). It's displaying many large sprites at the same time, so that's pretty much to be expected at this point.

[SCHUMI_4EVER]

Yeah I know, I was just curious if it ran the same as the first or a little better.

o by the way this a bit off-topic, but congrats on 1000 posts rockmangames!

[RockmanForte]

Yeah I know, I was just curious if it ran the same as the first or a little better.

o by the way this a bit off-topic, but congrats on 1000 posts rockmangames!

Don't worry this emulator will be improvement in time. We will have to be patient. I am nuts about Megaman ZX on this emulator, lol. I know that desmume can run it but I am not in hurry up right now, heh.

What ? I am on 1003 posts already!? I didnt think of that! Thanks, SCHUMI. I will congrating you when you reach 50 posts! :D

[SCHUMI_4EVER]

I know it's still in development and I will have to be patient. It's just considering that the newer Yu-Gi-Oh! Spirit Caller works and Nightmare Troubadour does not even get past the same place it's been I just thought that in this case the newer game might also run better.

[RockmanForte]

The Nightmare Troudadour doesnt even get pass the same place because it might be different code design from Spirit Caller. :)

[cujo891]

Can 1 of u help me with my prob i run the ds and it says the rom image has crashed..plz help me

the game is yugioh gx spirit caller

[RockmanForte]

use the search engine and it had been answered already.

[cujo891]

I got the bios thing but do i also need to download eNDryptS Advanced 1.2, if so do i jsut google it and the firmware thing?

[RockmanForte]

Yes but for firmware. I am not say anything because it is not allowed to discussion about it in here. ;)

[Dyed)(Red]

uhhhhh ok this is a stupid question but how do u activate the 3D Rear alpha i can't figure it out.....................

[SCHUMI_4EVER]

It's in the settings bottom, left.

2.3c has it automatically enabled. It might be a good idea to get this anyway rather than use an older emulator.

[cujo891]

Well i've tried the firmware and other thigns but it ain't working, if u can't mention the other cud sum 1 possibly email me instruction on what to get and how to set it up to get this to work? my email is cujo891@hotmail.com. I'd really appreciate your help :)

[RockmanForte]

you need to show us your screenshot for your firmware and other things so we will be able to help you.

[cujo891]

I got Ds_ Firmware and NDS_Bios i cant take pic i jsut need instructions on how to get the ds set up to run.

[RockmanForte]

unzipped them and put them into no$gba folder. Make sure you rename ds_firmware to firmware. :)

Please let me know how you are doing ok ? ;)

[cujo891]

Do u know when a version that doesn't require doing all this stuff wil be coming out??

[SCHUMI_4EVER]

Well you only need it once, so if you know how to search and found them, that should be all you need.
No I don't know of it...in fact I am not sure if he's ever going to build them into the emulator.
I think making em hard to find is just fine.

[Yulina_SL]

After reading the information here, I'm still unable to setup the options at all (with F11)! I think the main problem is how the program is setup. Must I modify the program somehow? You see, as soon as I open no$gba, it immediately asks for an .nds or .gba file. If I click cancel, the program closes, never to come up until I execute it and watch it ask for a file again. May somebody help me with this issue? I hope this screenshot helps. :)

[Ramza_the_Omega]

how to get the firmware

[RockmanForte]

how to get the firmware

Dump it yourself because you can't asked where to get it. Google is your friend. :heh:

After reading the information here, I'm still unable to setup the options at all (with F11)! I think the main problem is how the program is setup. Must I modify the program somehow? You see, as soon as I open no$gba, it immediately asks for an .nds or .gba file. If I click cancel, the program closes, never to come up until I execute it and watch it ask for a file again. May somebody help me with this issue? I hope this screenshot helps. :)


I see that you do not have eNDryptS Advanced 1.2 and you must have it to encrypted nds files. Put it in the same folder in your picture and click eNDryptS Advanced and press 1 to encrypted the nds then press 0 to exit it and now try this:

http://img160.imageshack.us/img160/1694/30125562be9.jpg

Highlight your .nds then click Open

then:

Viola!!

http://img240.imageshack.us/img240/8325/30014432ob3.jpg

[Ramza_the_Omega]

well what do i need

[RockmanForte]

you nee nds bios and firmware and google it if you can find them. It's fair easy. :)

[SCHUMI_4EVER]

Open the rom, then change the options quickely. Then save them. Speficially set it to not start the cartridge immediately, it should first load the firmware (the other option). This will in future give you time to change any options you need.

[Ramza_the_Omega]

well i got a error saying rom immage has crashed

[RockmanForte]

well i got a error saying rom immage has crashed

*SIGHING* you need to read above..I just mentioned in my number #146 about rom image has crashed. :)

[SCHUMI_4EVER]

You need to read this topic some more.

[RockmanForte]

Do u know when a version that doesn't require doing all this stuff wil be coming out??

If you want a version that doesn't require doing all this stuff then it will be desmume or ideas. No$gba is much higher in compabilities than those two. Desmume is much higher in compabilities than ideas. It's depend on what you want.

[Yulina_SL]

Dump it yourself because you can't asked where to get it. Google is your friend. :heh:




I see that you do not have eNDryptS Advanced 1.2 and you must have it to encrypted nds files. Put it in the same folder in your picture and click eNDryptS Advanced and press 1 to encrypted the nds then press 0 to exit it and now try this:

http://img160.imageshack.us/img160/1694/30125562be9.jpg

Highlight your .nds then click Open

then:

Viola!!

http://img240.imageshack.us/img240/8325/30014432ob3.jpg

I have eNDryptS. It didn't work. I try to get to the setup quickly, but the window does NOT come up until I get the 'ROM driver crashed!' error message. Now what can I do? There is no way I can do setup without loading a rom? How is everyone else changing settings and such? :(

I did an encryption. (I'm guessing the firmware and bios had to be integrated with the nds file to do a proper encryption...)

And what are those other files I see on your directory?

[RockmanForte]

Try to delete no$gba.ini or no$gba configuration settings in your folder and try again.

[Ramza_the_Omega]

well i don have that file or dont see no$gba.ini or it was not created

[Yulina_SL]

Try to delete no$gba.ini or no$gba configuration settings in your folder and try again.

There are no .ini files or configs inside the directory, or the subfolders NO$GBA made. I also noticed that every time I try to encrypt thefiles, notepad windows come up. keep closing out PatchEngine .dat, .da1, etc before it completes as a "successful" encryption. Is Vista Ultimate doing something with these files?

[SCHUMI_4EVER]

Hmm take one rom and eNDryptS (rather re-unzip it to the new folder than copy/paste as you may forget to copy a file)to another folder. Use eNDryptS on the rom and try it on the rom (Make sure that you are linking to the new changed rom and not the old one you have tried in the past). Then try and run the rom. If it crashes use eNDryptS on the same rom again and try it again.
It should work either the first or second time you do it without crashing and then you can change settings...that's the way we did...or I at least.

Hmm you may have something there Yulina_SL the possible problem with eNDryptS is that it's a DOS program...so maybe you can't run it in Vista? I have XP and only the program window (well DOS window) comes up not notebad or something else.

[Ramza_the_Omega]

the computer im using currently is vista

[SCHUMI_4EVER]

That could be the problem....Vista really is not very compatible with other things, especially older ones.
Sorry but I only have Windows XP so if your problems stem from Vista I can't help you.

[cujo891]

I dont have a No$gba folder do i create 1 and where did u find theeNDryptS. 1.2 thing?

[Ramza_the_Omega]

well i try again on my windows 2000 later

[RockmanForte]

I dont have a No$gba folder do i create 1 and where did u find theeNDryptS. 1.2 thing?

yes, you need to create a no$gba folder and use the google.com to find eNDryptS 1.2

[cujo891]

woot i got the eNDryptS 1.2 and everything else wut do i do next?

[SCHUMI_4EVER]

Read this topic.

[cujo891]

Rockman dude ty so much it works now i really appreciate it bro :)

[SCHUMI_4EVER]

Gee thanks....

[Yulina_SL]

the computer im using currently is vista

Hmm, that might be the case. I have Vista Ultimate.

[cujo891]

Erm u 2 schumi erm is there any way to fix the game speed ?its kinda slow

[SCHUMI_4EVER]

Well turn sound off and to the lowest quality. Change burst-delays to fast/fast. Change the display settings to VGA poppy bright. Also change the speed to Unlimited Mhz Disaster 10%.

Not sure if all of those actually increase speed, but those are my settings.
I get decent speeds, not perfect but most definately decent.
Then again my PC is a gaming PC, a year old one...but still a gaming PC. 1GB RAM and a AMD Athlon 64 3700+ and a Radeon X850XT so it does still deliver more power than the average home computer.

[Ramza_the_Omega]

it still saying the same error

[SCHUMI_4EVER]

I did not mean the emulator can't work on Vista...I meant eNDryptS can't, because it's a dos program. Windows 2000 aint the biggest friend of DOS either by the way.
So what you should be doing is exacty as I told your earlier, move one rom to a new folder, re-unzip eNDryptS etc. etc.
I don't want to retype everything just do the same as I told you in that post a few hours ago.

If done correctly it will work. If eNDryptS once again brings up notepad or something else then I guess windows 2000 also won't work with it.

[Ramza_the_Omega]

no not that the emu is saying the same error

never mind i got it work thanks

[Yulina_SL]

I did not mean the emulator can't work on Vista...I meant eNDryptS can't, because it's a dos program. Windows 2000 aint the biggest friend of DOS either by the way.
So what you should be doing is exacty as I told your earlier, move one rom to a new folder, re-unzip eNDryptS etc. etc.
I don't want to retype everything just do the same as I told you in that post a few hours ago.

If done correctly it will work. If eNDryptS once again brings up notepad or something else then I guess windows 2000 also won't work with it.

I finally got NO$GBA to respond properly! Only two problems (images included)
What say you? oO

The only game I am trying to test out is Pokemon Diamond. Right now, it's the only reason I'm picking up my DS again. It seems to respond a lot better on my XP Home. Good ting I didn't load Vista Premium on that computer, too! :D

[RockmanForte]

Rockman dude ty so much it works now i really appreciate it bro :)

You are welcome but at least SCHUMI-4-EVA helps you some. Thanks him as well. :);):innocent: :thumb:

[Yulina_SL]

This a set of logs from a friend's friend.

[17:16] Rena Winkoop: the first line says it can't read "raa/laa ta"
[17:18] Rena Winkoop: i can't make out one character on the second line, but ti's saying to listen to something, then the last line says to do a sashikomi card, or somthing like that. make any sense?
[17:18] Tsume Xiao: not to me :P
[17:19] Rena Winkoop: tenshisun... the second line says listen to tenshisun...
[17:21] Tsume Xiao: there is a better quality version he says
[17:22] Rena Winkoop: one second
[17:24] Tsume Xiao: okies ^^
[17:25] Tsume Xiao: and he put it on the internets o.o
[17:25] Tsume Xiao: MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=0ITW7UJQ)
[17:29] Rena Winkoop: raata could be "letter" or "writer." it can't read the input or requested thing... i don't know the word Tenshisun, though "tenshi" is angel
[17:29] Rena Winkoop: but the user is to listen to that, then do the sashikomi card
[17:30] Rena Winkoop: when i can use more than one program i will look up the rest and IM you

Is this something related to flash memory? (look at the post two above this one; the three pics)
MORE INFORMATION

[17:55] Rena Winkoop: ok i'm retarded, i can read the second copy much better, lol
[17:56] Rena Winkoop: the first line says "could not read the data"
[18:02] Rena Winkoop: hmmm, dengen is an electrical source, that's the first word on the second line. damn my old lady brain, lol
[18:02] Rena Winkoop: hmmm, dengen is an electrical source, that's the first word on the second line. damn my old lady brain, lol
[18:06] Rena Winkoop: ok it says could not read the data
[18:06] Rena Winkoop: check the power source
[18:07] Rena Winkoop: insert the card

Check the power source... ...So why is there a BATTERY subfolder, hmm?

[JJXB]

LOOK (http://forums.ngemu.com/misc-handheld-discussion/84923-no-gba-v2-3c-released-3.html) before posting in a (now)irrelevant thread

[SCHUMI_4EVER]

You need to set the memory in your settings. Not sure what the correct one is though.
This is not neccessarily an irrelevant thread if some people still have and are trying to use 2.3b. I still have mine.

[Yulina_SL]

You need to set the memory in your settings. Not sure what the correct one is though.
This is not neccessarily an irrelevant thread if some people still have and are trying to use 2.3b. I still have mine.

I see! I changed it to 64KB something. It seems to work better now. Hellish slow outside, but almost fine inside, even on high priority for the task.

[Andemon]

If the current rate is any indicator, this emu probably will improve quite a bit by the time that the english version of Pokemon is released. Not that I personally care about Pokemon, but I suspect that you'll probably be able to play it at faster speed then.

[Dyed)(Red]

ok this is driving me insane where is should say 3D rear alpha it says solar darkness level, wtf?

[RockmanForte]

Calm down. 3D Rear Alpha is already in this next build 2.3c so you no longer need to enable it because it is permanent enable. solar darkness and light is something I am not sure about..maybe it is something to do with botaki games, I think.

[Dyed)(Red]

well i still cant play Yu-Gi-Oh GX Spirit Caller even with 2.3c

[RockmanForte]

Tell us what's wrong ? You need to be specific.

[SCHUMI_4EVER]

well i still cant play Yu-Gi-Oh GX Spirit Caller even with 2.3c

More reading of other no$GBA topics is required.

[cujo891]

Hey guys does pokemon diamond and pearl run on this?, because when i run diamond the intro starts then the screen goes black.

[RockmanForte]

No, only 2.3c.

[cujo891]

I got 2.3c and it froze after i saw the begnning like 1 second of the intro

[RockmanForte]

Did you see the pictures I posted ? Then you might have a bad dump or something.

[Dyed)(Red]

whats wrong is that where is should say 3D rear alpha it says Solar Darkness level and there is no place to activate it

[SCHUMI_4EVER]

That's because it's allready fully implemented, so that is not your problem.

[RockmanForte]

Solar Darkness and Light and something like that was for Botaki games and some other that I dont know required Sun and Dark emulated into it. This emulator is only one that does the trick. Check out at the no$gba thread about it. :)

[cujo891]

Pokemon pearl works after the black screen, you have to wait like 3-5 min and ull see press start afterwards, wait another few minutes and you will see the professor then u can play in the game, but u cannot play very well because your character moves slow like a turtle...When will it be able to run at normal speed?

[RockmanForte]

When will it be able to run at normal speed?

BZZZT! Wrong answer. The developer will not like your answer. Enjoy this emulator and let them do the rest for updates in the near future. There are nothing you can do about it for now.

[SCHUMI_4EVER]

BZZZT! Wrong answer. The developer will not like your answer. Enjoy this emulator and let them do the rest for updates in the near future. There are nothing you can do about it for now.

Err...wrong question?

[RockmanForte]

Err...wrong question?

Believe me. I talked with the developer and you know why his forum shut down ? I didnt say he complaint about it and I liked this BZZT! like a game, lol. COMPLAINT was the reason: when when when when. It was annoying to him. That's why. :)

[SCHUMI_4EVER]

I was correcting you because he asked a question, he did not give an awnser. So it shoulda been BZZT! Wrong Question...........

[Megazero]

Can you give me the link to download MegaMan Battle Network 5 rom ?

[JKKDARK]

Can you give me the link to download MegaMan Battle Network 5 rom ?

Stop asking for games. Read the rules (http://www.ngemu.com/forums/showpost.php?p=751349&postcount=1)

[hatuu]

hey rockmangames can u tell me how to adjust the mouse to use the styler in no$gba(v.2.3d).my mouse doesnot click in touch screen.

[TosheX]

rockmans english has helped more ppl on this forum then someone elses so instead of criticising ithink we should thank him for replying to all of us and not simply ignoring us :) 10x rockmangames, and ur english is excelent now

[SCHUMI_4EVER]

You do realise I made that post half a month ago and am over it by now?

[Gladiator@]

You do realise I made that post half a month ago and am over it by now?

Yeah, you are right, but rockman isn't posting since your patetic "battle" with him and his english, that wasn't the first time you did it and you should apologize for keeping this opinion instead of stay quiet.
SCHUMI-4-EVA, you should be happy, now you are on the place you want to be since the beginning, you are where he was, but you could be there without take him off, just like he did.
Rockman, come back. People needs your help. :thumb:

P.S. You can say anything you want about my english, open a new thread named: "Rockman and Gladiator@ don't speak english", them you will be ok.

Arrogance is not the way. :thumb:

[SCHUMI_4EVER]

I never meant to do anything to rockmangames.

I don't even know how it became such a huge argument, I asked a simple question and he got offended and whole argument arose somehow.
I corrected him because I thought he was being silly by not wanting to awnser my simple question which annoyed me at the time.
Since then I have appologised and I was under the impression that we were both over it by now, not just me.

Do you really think a guy who's first language is german, uses chatspeak when typing 80% of the time and makes more typos than should be humanly possible can have an arrogant attitude about english?

He has removed his posts so considering you can't see where I might have been coming from, don't prejudge me.

[Gladiator@]

I never meant to do anything to rockmangames.

I don't even know how it became such a huge argument, I asked a simple question and he got offended and whole argument arose somehow.
I corrected him because I thought he was being silly by not wanting to awnser my simple question which annoyed me at the time.
Since then I have appologised and I was under the impression that we were both over it by now, not just me.

Do you really think a guy who's first language is german, uses chatspeak when typing 80% of the time and makes more typos than should be humanly possible can have an arrogant attitude about english?

Ok, I just said what I think.
But it's already gone, let the past be the past and start again, sry if I was rude, but I was here since the beggining, when you start posting in this forum and saw everything, rockman really got offended 'cause that wasn't the first time. But it's ok.
Like you said, you were both over it.
And if someone will try to keep this alive, that person won't be me. ;)
Ok?! Can we just go back helping people and let people help us now?
:) See you around Shumi

Edit: Like I said, I was here since the beggining, before rock remove his posts. Let's put a rock in this discussion.

[SCHUMI_4EVER]

Fine by me :)

I have seen rockmangames post since so it could be that hes just really busy or lost net access?

I miss him aswell, he knew a few anwnsers I did not, so since he has been gone my life has been a little more difficult.
I sometimes skip topics because I have no clue what the awnser could be and hope people think I just missed it. :dead:

[Gladiator@]

Fine by me :)

I have seen rockmangames post since so it could be that hes just really busy or lost net access?

Yeah, he should be busy =]
Well, let's wait, maybe he gives some feedback later.

[RockmanForte]

Well, I am back and I thanks some of you guys for a nice feedback. I am on my vacation in Canada for a month so now I have some free time but do not worry. I will be back in April 6th when my vacation is over. Cheers and stay outta trouble, you hear ? :)

P.S. Do not worry because I forgave SCHUMI-4-EVA. It was in the past.

[TosheX]

hey rock, since ure there on vacation, dont forget to watch 300 movie in cinemas now :D and to have some freakin good time ;)

[RockmanForte]

hey rockmangames can u tell me how to adjust the mouse to use the styler in no$gba(v.2.3d).my mouse doesnot click in touch screen.

You need a firmware to have a touch screen to work that way.

hey rock, since ure there on vacation, dont forget to watch 300 movie in cinemas now :D and to have some freakin good time ;)

Thanks but I do not think so I will wait for it in america. :P

[Gladiator@]

I miss him aswell, he knew a few anwnsers I did not, so since he has been gone my life has been a little more difficult.
I sometimes skip topics because I have no clue what the awnser could be and hope people think I just missed it. :dead:

hehehe, that's normal :emb:
Nobody has all the answers ;)

Cheers and stay outta trouble, you hear ? :)


:emb: hehehe, yep

P.S. Do not worry because I forgave SCHUMI-4-EVA. It was in the past.


Well..... we are ok now. :innocent:

....

Good to see you posting again rock :thumb: