Super Jox Box Pro issues

[FrankTheCrazy]

I am using a Super Jox Box Pro to plug my PS2 controller into my computer, but I am having some issues with it in PCSX2 0.9.2.

When I go to assign any button using the SSSPSX driver it will automatically put "J0_AXIS6_MIN" into any entry when the controller is in Analog mode or "J0_AXIS2_MAX" when the controller is in Digital mode. This has happened before in other emulators, but I was always able to correct it with a "dead zone" adjustment found in the emulator. I can not find any such adjustment in this plugin nor do the drivers for this device carry any such feature. I tried to recalibrate the controller, but that did not help.

System specs:

AMD AM2 X2 4000+ (2x1MB L2)
ASUS Crosshair motherboard (v0302 BIOS)
eVGA 7600GS
Creative Labs X-Fi Fatal1ty
2GB (2x1GB) OCZ Gold 800MHz
Windows XP SP2 32bit


Thanks for the help!

[FrankTheCrazy]

I really hate to bump my own topic, but I was able to get the controll mostly worked out. I was able to use PADwinkeyb to bind all of the buttons to the controller, however, none of the directions will bind :(

[Mig12]

I had the same problem but I am using the joy box for the nintendo GC controller I fixed it by putting the GC controller in analog mode
it was one of the options with the driver I found on driversguide.com

[FrankTheCrazy]

Thanks for the tip. The drivers I got for my device are the newest (and only) ones from the manufacturer (MayFlash) I tried various ones for devices that I don't have and I got the same result with all of them; they all give me the same problem :(