PDA

View Full Version : owners of the via 694x....

Rargh
July 14th, 2001, 16:39
Hi to all of u.

For about 1 week, i ve had a lot of troubles which caused me to lower the fsb.
Well, i ve seen a board on the mobo which explained how to configure the cpu multplier w/ jumpers.
It reffered to 4 jumpers: JX1; JX2; JX3 and JX4.
I ve found the last one (which was covered initially by a jumper in order to do a 5.5x ratio.That was the only one i ve found)

So can someone know where are situated the other ones???
A picture or an explanation would be really appreciated about those weird jumpers ( i know that modifying the cpu multiplier is impossible, but i can at least give it a try...)

Thx for ur help

Bye
Raziel
July 14th, 2001, 16:43
Don't you have your MOBO manual? It should be written/shown where they are.
Rargh
July 14th, 2001, 16:50
I ve already checked thank u!
If i give advices like: "Check the readme"
I m also doing the same thing.
Nothing s one this side :(

Anyone has it???
Raziel
July 14th, 2001, 16:55
What is the exact name of your card?
Rargh
July 14th, 2001, 16:57
QDI Advance 10E, based w/ a via694x chipset.
Raziel
July 14th, 2001, 16:58
Is QDI the brand?
Rargh
July 15th, 2001, 12:10
Oh, just forget it:

I ve found them. there were not jumpers anymore:
There are soldered in the proper order (like jumpers).
So i tried to solder myself those ones and what do i see while I was booting?
An error message from yhe bios:

Cpu has ben changed, reset the defaults settings.. eheh.
Well; it was worth the try anyway, I ve found those jumpers.

Bye