I've configed epsxe fine, but adripsx gives me black screen

Adair · April 12th, 2001

Like I said, I've been playing on epsxe for a few months now, so I think I've got AdriPSX configured correctly. It only gives me a blank screen though.

I've tried PSX CDs, and ISO. I downloaded the installer with all the plugs, so I've tried Barrett&Kazzuya, Tratax, and some other aspi drivers to no avail. And I configured everything else the same as epsxe. Oh and I noticed that some games only work without that static thingy enabled, but that didn't help either.
Oh well, here are my specs:
Celeron 600 @ 900mhz
128Mb
TNT2 ultra

Games I tried on CD: bushido blade2, Tenchu2, Gran Turismo 2
and I tried Syphon Filter 2 on ISO

If I need to give any more info just reply & ask. I would love to get another great emu running.

ice2hot · April 18th, 2001

same here ive read the docs and even deleted the registry settings and configured it again and still i get the black screen :shout: ....hey ppl give this post a look as well :rockets:

JeremyAnderson · April 19th, 2001

I also have this problem

The old version at least ran for me.

April 19th, 2001

I deleted the registry settings, reinstalled, set it up just like ePSXe, and it works fine for me. I don't know what I am doing that is different. I'll play some more Darkstone on it and post some screen shots. If I knew how you guys were trying to set it up maybe I could help.:confused:
sincerely,
sx/amiga

andyqkw · April 20th, 2001

Got it working for me too.

ice2hot · April 20th, 2001

got it working earlier before i didnt delete ther registry properly

tidus · April 24th, 2001

What's the difference between just using the zip file and using the installer? This question applies to both AdriPSX and ePSXe.

Warhammer · May 1st, 2001

Same here: Black Screen'o'Death
Downloaded new version as exe and installed...never had a previous version, so no conflicts possible.

Using proper 1001 Bios and original GT2 CD and ISO (created internally)

I can Bios boot no problem, sound & video working....

Tried many,many CD plugins.. (using a Ricoh IDE CDRW 7083a which reads/writes RAW btw), but CDRom never spins up or gets accessed...waited well beyong the 30-60secs..

Created a RAW DAO+sub using CloneCD and mounted with Daemon Tools 2.60 as well..no luck either..mounted and accessible..just no luck booting up..

Celly 450a
TNT 1
Diamond MX300 PCI A3D sound
224 megs'o'ram
Ricoh IDE CDRW 7083a
BH6

Hope we can solve this.....

**Roor** · May 2nd, 2001

Well.. and interesting point here... is that GT2 is not playable yet on AdriPSX yet... (at least the one I've got at home)...

gilmey · May 13th, 2001

i too get a black screen ani havent had the older version
what is the problem?

Musashi · May 14th, 2001

Quote:

Originally posted by gilmey
i too get a black screen ani havent had the older version
what is the problem?

Where is your specs???
Adri works fine for me...
AMD K6-450, 64 RAM.

gilmey · May 14th, 2001

i have amd k7-800 128 ram

Musashi · May 14th, 2001

Adri works fine with this configuration:
SPU- null
GPU- Pete 3D 1.49
CDR- Pete CDR plugin.

Your problem can be with CDR plugin.

April 18th, 2001	#2 (permalink)
ice2hot Avatar says it all. Join Date: Apr 2001 Location: Dubai Posts: 521	Re: I've configed epsxe fine, but adripsx gives me black screen same here ive read the docs and even deleted the registry settings and configured it again and still i get the black screen :shout: ....hey ppl give this post a look as well :rockets: __________________ cant think up of a cool one yet

April 19th, 2001	#3 (permalink)
JeremyAnderson Registered User Join Date: Apr 2001 Location: Terra Posts: 55	Re: I've configed epsxe fine, but adripsx gives me black screen I also have this problem The old version at least ran for me. __________________ I want net-play kupo!

April 19th, 2001	#4 (permalink)
sxamiga Guest Posts: n/a	Re: I've configed epsxe fine, but adripsx gives me black screen I deleted the registry settings, reinstalled, set it up just like ePSXe, and it works fine for me. I don't know what I am doing that is different. I'll play some more Darkstone on it and post some screen shots. If I knew how you guys were trying to set it up maybe I could help.:confused: sincerely, sx/amiga

April 20th, 2001	#5 (permalink)
andyqkw ItsNotMe Join Date: Apr 2001 Location: Singapore Posts: 137	Re: I've configed epsxe fine, but adripsx gives me black screen Got it working for me too.

April 20th, 2001	#6 (permalink)
ice2hot Avatar says it all. Join Date: Apr 2001 Location: Dubai Posts: 521	Re: I've configed epsxe fine, but adripsx gives me black screen got it working earlier before i didnt delete ther registry properly __________________ cant think up of a cool one yet

April 12th, 2001	#1 (permalink)
Adair Ghost Hacker Join Date: Apr 2001 Posts: 1,830	Like I said, I've been playing on epsxe for a few months now, so I think I've got AdriPSX configured correctly. It only gives me a blank screen though. I've tried PSX CDs, and ISO. I downloaded the installer with all the plugs, so I've tried Barrett&Kazzuya, Tratax, and some other aspi drivers to no avail. And I configured everything else the same as epsxe. Oh and I noticed that some games only work without that static thingy enabled, but that didn't help either. Oh well, here are my specs: Celeron 600 @ 900mhz 128Mb TNT2 ultra Games I tried on CD: bushido blade2, Tenchu2, Gran Turismo 2 and I tried Syphon Filter 2 on ISO If I need to give any more info just reply & ask. I would love to get another great emu running.

April 24th, 2001	#7 (permalink)
tidus Registered User Join Date: Apr 2001 Posts: 253	Re: I've configed epsxe fine, but adripsx gives me black screen What's the difference between just using the zip file and using the installer? This question applies to both AdriPSX and ePSXe.

May 1st, 2001	#8 (permalink)
Warhammer Registered User Join Date: May 2001 Location: Canada Posts: 1	Same here: Black Screen'o'Death Downloaded new version as exe and installed...never had a previous version, so no conflicts possible. Using proper 1001 Bios and original GT2 CD and ISO (created internally) I can Bios boot no problem, sound & video working.... Tried many,many CD plugins.. (using a Ricoh IDE CDRW 7083a which reads/writes RAW btw), but CDRom never spins up or gets accessed...waited well beyong the 30-60secs.. Created a RAW DAO+sub using CloneCD and mounted with Daemon Tools 2.60 as well..no luck either..mounted and accessible..just no luck booting up.. Celly 450a TNT 1 Diamond MX300 PCI A3D sound 224 megs'o'ram Ricoh IDE CDRW 7083a BH6 Hope we can solve this.....

May 2nd, 2001	#9 (permalink)
Roor Emu author Join Date: Apr 2001 Location: Argentina Posts: 198	Well.. and interesting point here... is that GT2 is not playable yet on AdriPSX yet... (at least the one I've got at home)...

May 13th, 2001	#10 (permalink)
gilmey Registered User Join Date: May 2001 Posts: 29	i too get a black screen ani havent had the older version what is the problem?

May 14th, 2001	#12 (permalink)
gilmey Registered User Join Date: May 2001 Posts: 29	i have amd k7-800 128 ram

May 14th, 2001	#13 (permalink)
Musashi From ngemu past, I am! Join Date: Apr 2001 Location: Brazil Posts: 192	Adri works fine with this configuration: SPU- null GPU- Pete 3D 1.49 CDR- Pete CDR plugin. Your problem can be with CDR plugin. __________________ Master: Miyamoto "Takezo" Musashi

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode