Emuforums.com - View Single Post

Master_T · June 17th, 2007

Hi guys!

Recently, I built an adatper to connect my n64 controller to the pc, following the guide available at emulatronia. Took quite a bit of time & patience, but finally I did it.

But theres a problem! When I install NTPAD (the software used to handle n64 controllers on pc) and I calibrate, the analog stick is won't work correctly, meaning that it is not sensible enough. In games, even if i press it all the way in one direction, it acts like it's pressed 40-50 %, and the player, for example, walks instead of running.

I'm sure very few people know something about this issue, as I don't think lot of people use the n64 pad on theyr pcs, but I hope someone can help.... thx in advance and sorry 4 bad english.

June 17th, 2007	#1 (permalink)
Master_T Registered User Join Date: Jun 2007 Location: Brecan City Posts: 55	N64 joypad on PC..... problem.... Hi guys! Recently, I built an adatper to connect my n64 controller to the pc, following the guide available at emulatronia. Took quite a bit of time & patience, but finally I did it. But theres a problem! When I install NTPAD (the software used to handle n64 controllers on pc) and I calibrate, the analog stick is won't work correctly, meaning that it is not sensible enough. In games, even if i press it all the way in one direction, it acts like it's pressed 40-50 %, and the player, for example, walks instead of running. I'm sure very few people know something about this issue, as I don't think lot of people use the n64 pad on theyr pcs, but I hope someone can help.... thx in advance and sorry 4 bad english.