Not all boards will tell you what the voltage is currently at or will let you change it. The manual might tell you where you can check it in the BIOS. I'm guessing that bank interleave setting is the one that changes it from 1T to 2T on your board?
For testing, try running Prime95's blend torture test mode.
__________________
Main PC:
Asus P6T Deluxe, Intel Core i7 920 C0 @ 3.7 GHz (195x19, 1.3v core, 1.84v PLL, 1.3625v uncore) w/Thermalright Ultra 120 Extreme, 3x2 GB G Skill PC3-12800 @ 780 MHz, 7-7-7-21-1T, 1.66v; ATi Radeon HD 4870 1 GB @ 790/1000 w/Zalman VF-1000, 300 GB WD VelociRaptor, 4x500 GB WD RE2 (RAID 10), 3ware 9650SE-4LPML RAID controller, SB X-Fi Titanium, Seasonic M12D 750w, CM Stacker 810, Windows 7 Pro 64-bit, Dell 2007WFP
XBL/PSN/WoW: Thordrune